Hi,

Just want to report a non-working board - the Asrock K7S41GX, tested with flashrom r711 and superiotool r4623.

first some brief details ...

Board: Asrock K7S1GX
Bios Vendor: AMI
Bios Version: P1.90

root@ubuntu:~# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 741/741GX/M741 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter


flashrom v0.9.1-r711
No coreboot table found.
This chipset supports the following protocols: Non-SPI.
WARNING: No chipset found. Flash detection will most likely fail.
Calibrating delay loop... OK.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.


root@ubuntu:~# ./superiotool/superiotool
superiotool r4623
Found Winbond W83697HF/F/HG (id=0x60, rev=0x12) at 0x2e


Cheers,

--
Udu Ogah
.~~~~~~~~~~.