$ sudo ./flashrom -V
flashrom v0.9.4-r1401 on Linux 2.6.38-10-generic (x86_64), built with libpci 3.1.7, GCC 4.5.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1187M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 993 us, 10000 myus = 9942 us, 4 myus = 6 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "ASRock"
DMI string baseboard-product-name: "M3A-GLAN"
DMI string baseboard-version: "                      "
DMI string chassis-type: "Desktop"
Found chipset "AMD SB600" with PCI ID 1002:438d. Enabling flash write... SPI base address is at 0xfec00100
AltSpiCSEnable=0, SpiRomEnable=0, AbortEnable=0
PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=0, SpiOpEnInLpcMode=0
SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=0, DropOneClkOnRd=0
NormSpeed is 16.5 MHz
GPIO11 used for SPI_DO
GPIO12 used for SPI_DI
GPIO31 used for SPI_HOLD
GPIO32 used for SPI_CS
GPIO47 used for SPI_CLK
SB700 IMC is not active.
ROM strap override is not active
OK.
This chipset supports the following protocols: LPC, FWH, SPI.
Probing for AMIC A25L05PT, 64 kB: