I have a problem

I am trying to flash a W25Q64JVSIM flash memory

I get this answer when I type the following command

$ sudo flashrom --programmer linux_spi:dev=/dev/spidev0.0 -E

flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).

Using default 2000kHz clock. Use 'spispeed' parameter to override.

Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI) on linux_spi.

===

This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE

The test status of this chip may have been updated in the latest development

version of flashrom. If you are running the latest development version,

please email a report to flashrom@flashrom.org if any of the above operations

work correctly for you with this flash chip. Please include the flashrom log

file for all operations you tested (see the man page for details), and mention

which mainboard or programmer you tested in the subject line.

Thanks for your help!

No operations were specified.