1. Hello Nuno Torres. From the output looks like the issue it's with the flash chip, it is not detected properly, "Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on ch341a_spi". Maybe try a new chip with exact specs, or a compatible one.

On Sun, 1 Mar 2020, 01:35 , <flashrom-request@flashrom.org> wrote:

Send flashrom mailing list submissions to
flashrom@flashrom.org

To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
flashrom-request@flashrom.org

You can reach the person managing the list at
flashrom-owner@flashrom.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of flashrom digest..."

Today's Topics:

1. request for adding support to HP Elitebook 840 G1 (Nuno Torres)
2. Flashrom tool failed on the Intel Bakerville platform(CPU:SKY-D)
(Ocean Huang)
3. Wanted firmware for 25fs406 (julien noname)
4. Test went wrong on GD25Q32(B) (Jakob Kok)

----------------------------------------------------------------------

Date: Mon, 24 Feb 2020 16:10:53 +0000
From: Nuno Torres <nagltorres@gmail.com>
Subject: [flashrom] request for adding support to HP Elitebook 840 G1
To: flashrom@flashrom.org
Message-ID:
<CABMxOrAJquX3ur4wK9zDtwN9dnAj7HPkm7F7mCkHQFayM7dnhQ@mail.gmail.com>
Content-Type: multipart/alternative;
boundary="0000000000004a2259059f549e36"

--0000000000004a2259059f549e36
Content-Type: text/plain; charset="UTF-8"

Hi ,

I'm trying to flash the BIOS chip of an HP Elitebook 840 G1 and i'm getting
the following message
(i'm issuing the command - sudo flashrom --programmer ch341a_spi -r
new.bin - using another laptop to which i connected a ch341 programmer and
a BIOS SOP8 SOIC8 ) :

flashrom v1.1 on Linux 4.19.0-5-amd64 (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on
ch341a_spi.
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE
WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above
operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and
mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Read is not working on this chip. Aborting.

i read what it says here ( https://www.flashrom.org/Supported_hardware ) :
" ...In general, flashing mobile devices is more difficult ... "

but it would be really really nice if you guys could add HP Elitebook 840
G1 to the list of supported laptops .

Thanks ,
Nuno Torres

--0000000000004a2259059f549e36
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div dir=3D"ltr"><div dir=3D"ltr"><div>Hi ,</div><div><br>=
</div><div>I'm trying to flash the BIOS chip of an HP Elitebook 840 G1 =
and i'm getting the following message <br></div><div>(i'm issuing t=
he command -=C2=A0 sudo flashrom --programmer ch341a_spi -r new.bin - using=
another laptop to which i connected a ch341 programmer and a BIOS SOP8 SOI=
C8=C2=A0 ) : <br></div><div><br></div><div>flashrom v1.1 on Linux 4.19.0-5-=
amd64 (x86_64)<br>flashrom is free software, get the source code at <a href=
=3D"https://flashrom.org">https://flashrom.org</a><br><br>Using clock_getti=
me for delay loops (clk_id: 1, resolution: 1ns).<br>Found Generic flash chi=
p "unknown SPI chip (RDID)" (0 kB, SPI) on ch341a_spi.<br>=3D=3D=
=3D<br>This flash part has status NOT WORKING for operations: PROBE READ ER=
ASE WRITE<br>The test status of this chip may have been updated in the late=
st development<br>version of flashrom. If you are running the latest develo=
pment version,<br>please email a report to <a href=3D"mailto:flashrom@flash=
rom.org">flashrom@flashrom.org</a> if any of the above operations<br>work c=
orrectly for you with this flash chip. Please include the flashrom log<br>f=
ile for all operations you tested (see the man page for details), and menti=
on<br>which mainboard or programmer you tested in the subject line.<br>Than=
ks for your help!<br>Read is not working on this chip. Aborting.</div><div>=
<br></div><div><br></div><div>i read what it says here (=C2=A0 <a href=3D"h=
ttps://www.flashrom.org/Supported_hardware">https://www.flashrom.org/Suppor=
ted_hardware</a>=C2=A0 ) :</div><div>" ...In general, flashing mobile =
devices is more difficult=C2=A0 ... " <br></div><div><br></div><div>bu=
t it would be really really nice if you guys could add HP Elitebook 840 G1 =
to the list of supported laptops .</div><div><br></div><div>Thanks ,</div><=
div>Nuno Torres<br></div></div></div></div>

--0000000000004a2259059f549e36--

------------------------------

Date: Wed, 26 Feb 2020 21:20:21 +0800
From: Ocean Huang <hahuan@celestica.com>
Subject: [flashrom] Flashrom tool failed on the Intel Bakerville
platform(CPU:SKY-D)
To: flashrom@flashrom.org
Message-ID:
<CADFoPF=FG3q4X2QDsZMDCOGV66TT=cUwCOz1PnD5rC7Ta0FZ5g@mail.gmail.com>
Content-Type: multipart/alternative;
boundary="000000000000253e93059f7a7805"

--000000000000253e93059f7a7805
Content-Type: text/plain; charset="UTF-8"

Hi Vendor:

We have some issue when using flashrom tool update BIOS & ME firmware on
the Intel Bakeville platform, you can refer to the below error log, could
you please help give some comments or suggestions about this issue?

*[root@localhost flashrom-v1.1]# ./flashrom -p internal -w CBR.1.00.01.bin
flashrom v1.1 on Linux 3.10.0-957.el7.x86_64 (x86_64)flashrom is free
software, get the source code at https://flashrom.org
<https://flashrom.org>Using clock_gettime for delay loops (clk_id: 1,
resolution: 1ns).Found chipset "Intel C620 Series Chipset Supersku".This
chipset is marked as untested. If you are using an up-to-date versionof
flashrom *and* were (not) able to successfully update your firmware with
it,then please email a report to flashrom@flashrom.org
<flashrom@flashrom.org> including a verbose (-V) log.Thank you!Enabling
flash write... SPI Configuration is locked down.FREG2: Management Engine
region (0x00003000-0x00a15fff) is locked.Not all flash regions are freely
accessible by flashrom. This is most likelydue to an active ME. Please see
https://flashrom.org/ME <https://flashrom.org/ME> for details.At least some
flash regions are read protected. You have to use a flashlayout and include
only accessible regions. For write operations, you'lladditionally need the
--noverify-all switch. See manpage for more details.Enabling hardware
sequencing because some important opcode is locked.OK.Found Programmer
flash chip "Opaque flash chip" (32768 kB, Programmer-specific) mapped at
physical address 0x0000000000000000.Reading old flash chip contents...
Transaction error between offset 0x00003000 and 0x0000303f (= 0x00003000 +
63)!FAILED.[root@localhost flashrom-v1.1]# ./flashrom -p internal -r
111.bin --ifd -i biosflashrom v1.1 on Linux 3.10.0-957.el7.x86_64
(x86_64)flashrom is free software, get the source code at
https://flashrom.org <https://flashrom.org>Using clock_gettime for delay
loops (clk_id: 1, resolution: 1ns).Found chipset "Intel C620 Series Chipset
Supersku".This chipset is marked as untested. If you are using an
up-to-date versionof flashrom *and* were (not) able to successfully update
your firmware with it,then please email a report to flashrom@flashrom.org
<flashrom@flashrom.org> including a verbose (-V) log.Thank you!Enabling
flash write... SPI Configuration is locked down.FREG2: Management Engine
region (0x00003000-0x00a15fff) is locked.Not all flash regions are freely
accessible by flashrom. This is most likelydue to an active ME. Please see
https://flashrom.org/ME <https://flashrom.org/ME> for details.At least some
flash regions are read protected. You have to use a flashlayout and include
only accessible regions. For write operations, you'lladditionally need the
--noverify-all switch. See manpage for more details.Enabling hardware
sequencing because some important opcode is locked.OK.Found Programmer
flash chip "Opaque flash chip" (32768 kB, Programmer-specific) mapped at
physical address 0x0000000000000000.Reading ich descriptor... done.Using
region: "bios".Reading flash... done.*

--
Thanks,
Best Regards,
Ocean Huang
BIOS Engineer
Celestica(Shanghai) R&D Center, China
email: hahuan@celestica.com
www.celestica.com

--000000000000253e93059f7a7805
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Hi Vendor:<div><br></div><div>We have some issue when usin=
g flashrom tool update BIOS & ME firmware on the Intel Bakeville platfo=
rm, you can refer to the below error log, could you please help give some c=
omments or suggestions about this issue?</div><div><br></div><div><i>[root@=
localhost flashrom-v1.1]# ./flashrom =C2=A0-p internal -w CBR.1.00.01.bin <=
br>flashrom v1.1 on Linux 3.10.0-957.el7.x86_64 (x86_64)<br>flashrom is fre=
e software, get the source code at <a href=3D"https://flashrom.org">https:/=
/flashrom.org</a><br><br>Using clock_gettime for delay loops (clk_id: 1, re=
solution: 1ns).<br>Found chipset "Intel C620 Series Chipset Supersku&q=
uot;.<br>This chipset is marked as untested. If you are using an up-to-date=
version<br>of flashrom *and* were (not) able to successfully update your f=
irmware with it,<br>then please email a report to <a href=3D"mailto:flashro=
m@flashrom.org">flashrom@flashrom.org</a> including a verbose (-V) log.<br>=
Thank you!<br>Enabling flash write... SPI Configuration is locked down.<br>=
FREG2: Management Engine region (0x00003000-0x00a15fff) is locked.<br>Not a=
ll flash regions are freely accessible by flashrom. This is most likely<br>=
due to an active ME. Please see <a href=3D"https://flashrom.org/ME">https:/=
/flashrom.org/ME</a> for details.<br>At least some flash regions are read p=
rotected. You have to use a flash<br>layout and include only accessible reg=
ions. For write operations, you'll<br>additionally need the --noverify-=
all switch. See manpage for more details.<br>Enabling hardware sequencing b=
ecause some important opcode is locked.<br>OK.<br>Found Programmer flash ch=
ip "Opaque flash chip" (32768 kB, Programmer-specific) mapped at =
physical address 0x0000000000000000.<br>Reading old flash chip contents... =
Transaction error between offset 0x00003000 and 0x0000303f (=3D 0x00003000 =
+ 63)!<br>FAILED.<br>[root@localhost flashrom-v1.1]# ./flashrom =C2=A0-p in=
ternal -r 111.bin --ifd -i bios<br>flashrom v1.1 on Linux 3.10.0-957.el7.x8=
6_64 (x86_64)<br>flashrom is free software, get the source code at <a href=
=3D"https://flashrom.org">https://flashrom.org</a><br><br>Using clock_getti=
me for delay loops (clk_id: 1, resolution: 1ns).<br>Found chipset "Int=
el C620 Series Chipset Supersku".<br>This chipset is marked as unteste=
d. If you are using an up-to-date version<br>of flashrom *and* were (not) a=
ble to successfully update your firmware with it,<br>then please email a re=
port to <a href=3D"mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> =
including a verbose (-V) log.<br>Thank you!<br>Enabling flash write... SPI =
Configuration is locked down.<br>FREG2: Management Engine region (0x0000300=
0-0x00a15fff) is locked.<br>Not all flash regions are freely accessible by =
flashrom. This is most likely<br>due to an active ME. Please see <a href=3D=
"https://flashrom.org/ME">https://flashrom.org/ME</a> for details.<br>At le=
ast some flash regions are read protected. You have to use a flash<br>layou=
t and include only accessible regions. For write operations, you'll<br>=
additionally need the --noverify-all switch. See manpage for more details.<=
br>Enabling hardware sequencing because some important opcode is locked.<br=
>OK.<br>Found Programmer flash chip "Opaque flash chip" (32768 kB=
, Programmer-specific) mapped at physical address 0x0000000000000000.<br>Re=
ading ich descriptor... done.<br>Using region: "bios".<br>Reading=
flash... done.</i><br><div><br></div>-- <br><div dir=3D"ltr" class=3D"gmai=
l_signature" data-smartmail=3D"gmail_signature"><div dir=3D"ltr"><div><div =
dir=3D"ltr"><div><div><span style=3D"color:rgb(136,136,136);font-size:12.8p=
x">Thanks,</span></div><div><span style=3D"color:rgb(136,136,136);font-size=
:12.8px">Best Regards,</span></div><div dir=3D"ltr"><span style=3D"color:rg=
b(136,136,136);font-size:12.8px">Ocean Huang</span><br style=3D"color:rgb(1=
36,136,136);font-size:12.8px"><span style=3D"color:rgb(136,136,136);font-si=
ze:12.8px">BIOS Engineer</span><br style=3D"color:rgb(136,136,136);font-siz=
e:12.8px"><font face=3D"arial, helvetica, sans-serif" style=3D"color:rgb(13=
6,136,136);font-size:12.8px"><span style=3D"color:rgb(68,68,68);font-size:1=
2.8px">Celestica(Shanghai) R&D Center, China</span></font><br style=3D"=
color:rgb(136,136,136);font-size:12.8px"><span style=3D"color:rgb(136,136,1=
36);font-size:12.8px">email:=C2=A0</span><a href=3D"mailto:hahuan@celestica=
.com" style=3D"color:rgb(17,85,204);font-size:12.8px" target=3D"_blank">hah=
uan@celestica.com</a><br style=3D"color:rgb(136,136,136);font-size:12.8px">=
<a href=3D"http://www.celestica.com/" style=3D"color:rgb(17,85,204);font-si=
ze:12.8px" target=3D"_blank">www.celestica.com</a><span style=3D"color:rgb(=
136,136,136);font-size:12.8px">=C2=A0</span><br></div></div></div></div></d=
iv></div></div></div>

--000000000000253e93059f7a7805--

------------------------------

Date: Thu, 27 Feb 2020 14:06:28 +0100
From: julien noname <grd866@gmail.com>
Subject: [flashrom] Wanted firmware for 25fs406
To: flashrom@flashrom.org, openbios@openbios.org,
openfirmware@openfirmware.info, seabios@seabios.org,
flashrom-gerrit@flashrom.org
Message-ID:
<CA+W3FyBshO0uGjLzAqzuax2yPbHv6qo+N79ORyGvXb1voa3AMA@mail.gmail.com>
Content-Type: multipart/alternative;
boundary="0000000000005e2020059f8e6642"

--0000000000005e2020059f8e6642
Content-Type: text/plain; charset="UTF-8"

Hi,
my HDD ST3000DM001 seagate barracuda doesn't respond i would like to
reflash new PCB with firmware i don't know where to find one. I had hard
trying to read my old pcb to get the firmware without sucess . Maybe you
have a firwmare for me on your archive to the flash spi 25fs406.

Thanks
Regards

--0000000000005e2020059f8e6642
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Hi,=C2=A0<div>my HDD ST3000DM001 seagate barracuda doesn&#=
39;t respond i would like to reflash new PCB with firmware i don't know=
where=C2=A0to find one. I had hard trying to read my old pcb to get the fi=
rmware without=C2=A0sucess=C2=A0.=C2=A0 Maybe you have a firwmare for me on=
your archive to the flash spi=C2=A025fs406.<br></div><div><br></div><div>T=
hanks</div><div>Regards</div><div><br></div></div>

--0000000000005e2020059f8e6642--

------------------------------

Date: Thu, 27 Feb 2020 18:17:27 +0100
From: Jakob Kok <jakobskok95@gmail.com>
Subject: [flashrom] Test went wrong on GD25Q32(B)
To: flashrom@flashrom.org
Message-ID:
<CAP1F-VM=aEYrvtuiYc7LUzMXidAOS04Togg_S9p0KHaY42Xc1A@mail.gmail.com>
Content-Type: multipart/alternative;
boundary="000000000000e8566a059f91e509"

--000000000000e8566a059f91e509
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

Dear Flashrom,

We are two master students working on our thesis and in that regard we are
doing a security analysis on an embedded device. The embedded device has an
external flash memory, and it is of the GD25Q32(B) series. We are using a
Shikra as extracting device (ft2232h). On your website, it states that this
should be a tested and verified flash chip. However, we get this error
message in our experiment - and we would really appreciate if you looked
into this.

flashrom -p ft2232_spi:type=3D232H -r spidump.bin
flashrom v1.2-2-g0f510a7 on Linux 5.2.0-kali2-amd64 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
<https://l.facebook.com/l.php?u=3Dhttps%3A%2F%2Fflashrom.org%2F%3Ffbclid%3D=
IwAR0Um5aS_3oHHqnSOiuJgcBAjXmI1qyBmmbykxPI2mas-mobiFt9Yu7GnH4&h=3DAT3LZKvlj=
6gfQNWNwov4JasuCriL8vXYgeSzPmwuARL0oKY88ddMUr0OokDEPDyaBu8QuXnE98NTGDbLWJm8=
C9EMg_zqQPet3HsoYFpfWd8XE0eHDOf5r50cbIkPnvJArZ4yrfEe2nJ3hqHN0Ww>

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on
ft2232_spi.
=3D=3D=3D
This flash part has status NOT WORKING for operations: PROBE READ ERASE
WRITE
The test status of this chip may have been updated in the latest developmen=
t
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above
operations
work correctly for you with this flash chip. Please include the flashrom lo=
g
file for all operations you tested (see the man page for details), and
mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Read is not working on this chip. Aborting.

Best regards,
Jakob Stenersen Kok & Bendik Aalmen Markussen

--000000000000e8566a059f91e509
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Dear Flashrom,<div><br></div><div>We are two master studen=
ts working on our thesis and in that regard we are doing a security analysi=
s on an embedded device. The embedded device has an external flash memory, =
and it is of the GD25Q32(B) series.=20

We are using a Shikra as extracting device (ft2232h). On your website, it s=
tates that this should be a tested and verified flash chip. However, we get=
this error message in our experiment - and we would really appreciate if y=
ou looked into this.</div><div><br></div><div><span style=3D"font-family:He=
lvetica,Arial,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre=
-wrap;background-color:rgb(241,240,240)">flashrom -p ft2232_spi:type=3D232H=
-r spidump.bin</span><br style=3D"color:rgb(68,73,80);font-family:Helvetic=
a,Arial,sans-serif;font-size:13px;white-space:pre-wrap;background-color:rgb=
(241,240,240)"><span style=3D"font-family:Helvetica,Arial,sans-serif;color:=
rgb(68,73,80);font-size:13px;white-space:pre-wrap;background-color:rgb(241,=
240,240)">flashrom v1.2-2-g0f510a7 on Linux 5.2.0-kali2-amd64 (x86_64)</spa=
n><br style=3D"color:rgb(68,73,80);font-family:Helvetica,Arial,sans-serif;f=
ont-size:13px;white-space:pre-wrap;background-color:rgb(241,240,240)"><span=
style=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(68,73,80);font-s=
ize:13px;white-space:pre-wrap;background-color:rgb(241,240,240)">flashrom i=
s free software, get the source code at </span><a target=3D"_blank" href=3D=
"https://l.facebook.com/l.php?u=3Dhttps%3A%2F%2Fflashrom.org%2F%3Ffbclid%3D=
IwAR0Um5aS_3oHHqnSOiuJgcBAjXmI1qyBmmbykxPI2mas-mobiFt9Yu7GnH4&h=3DAT3LZ=
Kvlj6gfQNWNwov4JasuCriL8vXYgeSzPmwuARL0oKY88ddMUr0OokDEPDyaBu8QuXnE98NTGDbL=
WJm8C9EMg_zqQPet3HsoYFpfWd8XE0eHDOf5r50cbIkPnvJArZ4yrfEe2nJ3hqHN0Ww" rel=3D=
"nofollow noopener" style=3D"color:rgb(56,88,152);text-decoration-line:none=
;font-family:Helvetica,Arial,sans-serif;font-size:13px;white-space:pre-wrap=
;background-color:rgb(241,240,240)">https://flashrom.org</a><br style=3D"co=
lor:rgb(68,73,80);font-family:Helvetica,Arial,sans-serif;font-size:13px;whi=
te-space:pre-wrap;background-color:rgb(241,240,240)"><br style=3D"color:rgb=
(68,73,80);font-family:Helvetica,Arial,sans-serif;font-size:13px;white-spac=
e:pre-wrap;background-color:rgb(241,240,240)"><span style=3D"font-family:He=
lvetica,Arial,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre=
-wrap;background-color:rgb(241,240,240)">Using clock_gettime for delay loop=
s (clk_id: 1, resolution: 1ns).</span><br style=3D"color:rgb(68,73,80);font=
-family:Helvetica,Arial,sans-serif;font-size:13px;white-space:pre-wrap;back=
ground-color:rgb(241,240,240)"><span style=3D"font-family:Helvetica,Arial,s=
ans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre-wrap;backgroun=
d-color:rgb(241,240,240)">Found Generic flash chip "unknown SPI chip (=
RDID)" (0 kB, SPI) on ft2232_spi.</span><br style=3D"color:rgb(68,73,8=
0);font-family:Helvetica,Arial,sans-serif;font-size:13px;white-space:pre-wr=
ap;background-color:rgb(241,240,240)"><span style=3D"font-family:Helvetica,=
Arial,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre-wrap;ba=
ckground-color:rgb(241,240,240)">=3D=3D=3D</span><br style=3D"color:rgb(68,=
73,80);font-family:Helvetica,Arial,sans-serif;font-size:13px;white-space:pr=
e-wrap;background-color:rgb(241,240,240)"><span style=3D"font-family:Helvet=
ica,Arial,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre-wra=
p;background-color:rgb(241,240,240)">This flash part has status NOT WORKING=
for operations: PROBE READ ERASE WRITE</span><br style=3D"color:rgb(68,73,=
80);font-family:Helvetica,Arial,sans-serif;font-size:13px;white-space:pre-w=
rap;background-color:rgb(241,240,240)"><span style=3D"font-family:Helvetica=
,Arial,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre-wrap;b=
ackground-color:rgb(241,240,240)">The test status of this chip may have bee=
n updated in the latest development</span><br style=3D"color:rgb(68,73,80);=
font-family:Helvetica,Arial,sans-serif;font-size:13px;white-space:pre-wrap;=
background-color:rgb(241,240,240)"><span style=3D"font-family:Helvetica,Ari=
al,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre-wrap;backg=
round-color:rgb(241,240,240)">version of flashrom. If you are running the l=
atest development version,</span><br style=3D"color:rgb(68,73,80);font-fami=
ly:Helvetica,Arial,sans-serif;font-size:13px;white-space:pre-wrap;backgroun=
d-color:rgb(241,240,240)"><span style=3D"font-family:Helvetica,Arial,sans-s=
erif;color:rgb(68,73,80);font-size:13px;white-space:pre-wrap;background-col=
or:rgb(241,240,240)">please email a report to <a href=3D"mailto:flashrom@fl=
ashrom.org">flashrom@flashrom.org</a> if any of the above operations</span>=
<br style=3D"color:rgb(68,73,80);font-family:Helvetica,Arial,sans-serif;fon=
t-size:13px;white-space:pre-wrap;background-color:rgb(241,240,240)"><span s=
tyle=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(68,73,80);font-siz=
e:13px;white-space:pre-wrap;background-color:rgb(241,240,240)">work correct=
ly for you with this flash chip. Please include the flashrom log</span><br =
style=3D"color:rgb(68,73,80);font-family:Helvetica,Arial,sans-serif;font-si=
ze:13px;white-space:pre-wrap;background-color:rgb(241,240,240)"><span style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(68,73,80);font-size:13=
px;white-space:pre-wrap;background-color:rgb(241,240,240)">file for all ope=
rations you tested (see the man page for details), and mention</span><br st=
yle=3D"color:rgb(68,73,80);font-family:Helvetica,Arial,sans-serif;font-size=
:13px;white-space:pre-wrap;background-color:rgb(241,240,240)"><span style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(68,73,80);font-size:13=
px;white-space:pre-wrap;background-color:rgb(241,240,240)">which mainboard =
or programmer you tested in the subject line.</span><br style=3D"color:rgb(=
68,73,80);font-family:Helvetica,Arial,sans-serif;font-size:13px;white-space=
:pre-wrap;background-color:rgb(241,240,240)"><span style=3D"font-family:Hel=
vetica,Arial,sans-serif;color:rgb(68,73,80);font-size:13px;white-space:pre-=
wrap;background-color:rgb(241,240,240)">Thanks for your help!</span><br sty=
le=3D"color:rgb(68,73,80);font-family:Helvetica,Arial,sans-serif;font-size:=
13px;white-space:pre-wrap;background-color:rgb(241,240,240)"><span style=3D=
"font-family:Helvetica,Arial,sans-serif;color:rgb(68,73,80);font-size:13px;=
white-space:pre-wrap;background-color:rgb(241,240,240)">Read is not working=
on this chip. Aborting.</span>=C2=A0=C2=A0<br></div><div><br></div><div>Be=
st regards,</div><div>Jakob Stenersen Kok & Bendik Aalmen Markussen</di=
v><div><br></div></div>

--000000000000e8566a059f91e509--

------------------------------

Subject: Digest Footer

_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-leave@flashrom.org

------------------------------

End of flashrom Digest, Vol 129, Issue 4
****************************************