flashrom v0.9.8-unknown on Linux 4.1.13-v7+ (armv7l)
flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian
Command line (8 args): flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1024 -c W25X64 -r verify4.rom -o logfileread.log
Calibrating delay loop... OS timer resolution is 3 usecs, 298M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1022 us, 10000 myus = 10014 us, 12 myus = 13 us, OK.
Initializing linux_spi programmer
Using device /dev/spidev0.0
Using 1024 kHz clock
The following protocols are supported: SPI.
Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3017
Found Winbond flash chip "W25X64" (8192 kB, SPI) on linux_spi.
Chip status register is 0x00.
===
This flash part has status UNTESTED for operations: READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Block protection is disabled.
Reading flash... done.