This review covers the GigaDevice (except GD25Q10) to Numonyx (partial, list below) chips that were added.

Here's a couple of general notes:
Please add page programming eraseblocks

WREN & WRSR flags only get added when the chip actually has the command.

Numonyx M45PE10-
+        .feature_bits    = FEATURE_WRSR_WREN,

The datasheet I have (Rev 7, April 2008) doesn't have a Write Status Register operation- only a Read Status Register. 

Numonyx M45PE20-
+        .feature_bits    = FEATURE_WRSR_WREN,
The datasheet I have (Rev 6, May 2008) doesn't have a Write Status Register operation- only a Read Status Register.

Numonyx M45PE40-
+        .feature_bits    = FEATURE_WRSR_WREN,
The datasheet I have (Rev 9, May 2008) doesn't have a Write Status Register operation- only a Read Status Register.

Numonyx M45PE80-
+        .feature_bits    = FEATURE_WRSR_WREN,
The datasheet I have (Rev 6, May 2008) doesn't have a Write Status Register operation- only a Read Status Register.

Numonyx M45PE16-
+        .feature_bits    = FEATURE_WRSR_WREN,
The datasheet I have (Rev 8, May 2008) doesn't have a Write Status Register operation- only a Read Status Register.

I'll cover the rest of the Numonyx chips from the patch in a follow-up review.