Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/28004 )
Change subject: Add support for MX25R6435F ......................................................................
Add support for MX25R6435F
Change-Id: I664ffce6f9aa7544e17b516a1b4179d561208b2f Signed-off-by: Nathan Rennie-Waldock nathan.renniewaldock@gmail.com Reviewed-on: https://review.coreboot.org/28004 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Paul Menzel paulepanter@users.sourceforge.net Reviewed-by: Nico Huber nico.h@gmx.de --- M flashchips.c M flashchips.h 2 files changed, 41 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved Paul Menzel: Looks good to me, but someone else must approve
diff --git a/flashchips.c b/flashchips.c index 2bbf60f..464e9b5 100644 --- a/flashchips.c +++ b/flashchips.c @@ -8650,6 +8650,45 @@
{ .vendor = "Macronix", + .name = "MX25R6435F", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25R6435F, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 3600}, + }, + + { + .vendor = "Macronix", .name = "MX29F001B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, diff --git a/flashchips.h b/flashchips.h index f4880d6..ecd8d7a 100644 --- a/flashchips.h +++ b/flashchips.h @@ -495,6 +495,8 @@ #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ #define MACRONIX_MX25L6495F 0x9517
+#define MACRONIX_MX25R6435F 0x2817 + #define MACRONIX_MX29F001B 0x19 #define MACRONIX_MX29F001T 0x18 #define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB; N has reset pin n/c. */