Attention is currently required from: Jonathan Zhang.
David Hendricks would like Jonathan Zhang to review this change.
Add support for Intel Emmitsburg PCH
This patch does the following:
- Add PCIe ID for Intel Emmitsburg PCH
- Based on ICH descriptor content, choose
CHIPSET_C620_SERIES_LEWISBURG. Although EBG only uses 80 for its PSL
value, LBG on Purley and Whitley use 139. So to cover both cases the
latter is used.
TESTED=tried on a server with Intel Emmitsburg PCH, flash update
was successful. This server, however, does not have flash chip
installed, it instead has em100 emulator connected.
Change-Id: I1edae9163b910c3831adc82c90840fa965479451
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
---
M chipset_enable.c
M ich_descriptors.c
2 files changed, 4 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/35/57635/1
diff --git a/chipset_enable.c b/chipset_enable.c
index 638c05f..cb0fbf1 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -2073,6 +2073,7 @@
{0x8086, 0xa247, B_S, NT, "Intel", "C620 Series Chipset Supersku", enable_flash_c620},
{0x8086, 0xa248, B_S, NT, "Intel", "C620 Series Chipset Supersku", enable_flash_c620},
{0x8086, 0xa249, B_S, NT, "Intel", "C620 Series Chipset Supersku", enable_flash_c620},
+ {0x8086, 0x1bca, B_S, NT, "Intel", "Emmitsburg Chipset SKU", enable_flash_c620},
{0x8086, 0xa2c4, B_S, NT, "Intel", "H270", enable_flash_pch100},
{0x8086, 0xa2c5, B_S, NT, "Intel", "Z270", enable_flash_pch100},
{0x8086, 0xa2c6, B_S, NT, "Intel", "Q270", enable_flash_pch100},
diff --git a/ich_descriptors.c b/ich_descriptors.c
index c3b30a7..652e6e3 100644
--- a/ich_descriptors.c
+++ b/ich_descriptors.c
@@ -941,6 +941,9 @@
warn_peculiar_desc(content->ISL != 23, "Gemini Lake");
return CHIPSET_GEMINI_LAKE;
}
+ /* Emmitsburg has 80, Lewisburg on Purley and Whitley has 139 */
+ if (content->ISL <= 139)
+ return CHIPSET_C620_SERIES_LEWISBURG;
/*
* Ibex Peak is historically used as the default when other
* chipsets are not identified.
To view, visit change 57635. To unsubscribe, or for help writing mail filters, visit settings.