Attention is currently required from: Angel Pons.
Nico Huber would like Angel Pons to review this change.
flashchips,spi25: Replace `.wrea_override` with FEATURE_4BA_EAR_1716
There are two competing sets of instructions to access the extended
address register of 4BA SPI chips. Some chips even support both sets.
So far, we assumed the 0xc5/0xc8 instructions by default and allowed
to override the write instructions with the `.wrea_override` field.
This has some disadvantages:
* The additional field is easily overlooked. So when adding a new
flash chip, one might assume only 0xc5/0xc8 are supported.
* We cannot describe flash chips completely that allow both
instructions (and some programmers may be picky about which
instructions can be used).
Therefore, replace the `.wrea_override` field with a feature flag,
and set it for chips known to support it (Spansion and ISSI). The
S25FL512S did not advertise EAR support at all, so we set it to
TEST_UNTESTED again.
Signed-off-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6d82f24898acd0789203516a7456fd785907bc10
Ticket: https://ticket.coreboot.org/issues/357
---
M dediprog.c
M flashchips.c
M include/flash.h
M include/spi.h
M spi25.c
5 files changed, 28 insertions(+), 15 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/36/64636/1
diff --git a/dediprog.c b/dediprog.c
index 91a1632..9775fde 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -416,7 +416,7 @@
}
}
} else {
- if (flash->chip->feature_bits & FEATURE_4BA_EAR_C5C8) {
+ if (flash->chip->feature_bits & FEATURE_4BA_EAR_ANY) {
if (spi_set_extended_address(flash, start >> 24))
return 1;
} else if (start >> 24) {
diff --git a/flashchips.c b/flashchips.c
index d8208fe..cc80159 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -7469,7 +7469,8 @@
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP |
+ FEATURE_4BA | FEATURE_4BA_ENTER_EAR7 | FEATURE_4BA_EAR_1716,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -7644,7 +7645,8 @@
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP |
+ FEATURE_4BA | FEATURE_4BA_ENTER_EAR7 | FEATURE_4BA_EAR_1716,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -16672,7 +16674,8 @@
.total_size = 32768,
.page_size = 256,
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_EAR7,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP |
+ FEATURE_4BA_NATIVE | FEATURE_4BA_ENTER_EAR7 | FEATURE_4BA_EAR_1716,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -16706,7 +16709,6 @@
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
- .wrea_override = 0x17,
},
{
@@ -16718,8 +16720,9 @@
.total_size = 65536, /* 512 Mb (=> 64 MB)) */
.page_size = 256,
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_NATIVE,
- .tested = TEST_OK_PREW,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP |
+ FEATURE_4BA_NATIVE | FEATURE_4BA_ENTER_EAR7 | FEATURE_4BA_EAR_1716,
+ .tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
diff --git a/include/flash.h b/include/flash.h
index 162c0ac..8203295 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -127,10 +127,12 @@
#define FEATURE_4BA_EAR_C5C8 (1 << 13) /**< Regular 3-byte operations can be used by writing the most
significant address byte into an extended address register
(using 0xc5/0xc8 instructions). */
-#define FEATURE_4BA_READ (1 << 14) /**< Native 4BA read instruction (0x13) is supported. */
-#define FEATURE_4BA_FAST_READ (1 << 15) /**< Native 4BA fast read instruction (0x0c) is supported. */
-#define FEATURE_4BA_WRITE (1 << 16) /**< Native 4BA byte program (0x12) is supported. */
+#define FEATURE_4BA_EAR_1716 (1 << 14) /**< Like FEATURE_4BA_EAR_C5C8 but with 0x17/0x16 instructions. */
+#define FEATURE_4BA_READ (1 << 15) /**< Native 4BA read instruction (0x13) is supported. */
+#define FEATURE_4BA_FAST_READ (1 << 16) /**< Native 4BA fast read instruction (0x0c) is supported. */
+#define FEATURE_4BA_WRITE (1 << 17) /**< Native 4BA byte program (0x12) is supported. */
/* 4BA Shorthands */
+#define FEATURE_4BA_EAR_ANY (FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_EAR_1716)
#define FEATURE_4BA_NATIVE (FEATURE_4BA_READ | FEATURE_4BA_FAST_READ | FEATURE_4BA_WRITE)
#define FEATURE_4BA (FEATURE_4BA_ENTER | FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_NATIVE)
#define FEATURE_4BA_WREN (FEATURE_4BA_ENTER_WREN | FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_NATIVE)
@@ -273,9 +275,6 @@
} voltage;
enum write_granularity gran;
- /* SPI specific options (TODO: Make it a union in case other bustypes get specific options.) */
- uint8_t wrea_override; /**< override opcode for write extended address register */
-
struct reg_bit_map {
/* Status register protection bit (SRP) */
struct reg_bit_info srp;
diff --git a/include/spi.h b/include/spi.h
index 14f71aa..ef331db 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -176,9 +176,11 @@
/* Write Extended Address Register */
#define JEDEC_WRITE_EXT_ADDR_REG 0xC5
+#define ALT_WRITE_EXT_ADDR_REG_17 0x17
/* Read Extended Address Register */
#define JEDEC_READ_EXT_ADDR_REG 0xC8
+#define ALT_READ_EXT_ADDR_REG_16 0x16
/* Read the memory */
#define JEDEC_READ 0x03
diff --git a/spi25.c b/spi25.c
index f6900a9..ad218fa 100644
--- a/spi25.c
+++ b/spi25.c
@@ -351,7 +351,16 @@
static int spi_write_extended_address_register(struct flashctx *const flash, const uint8_t regdata)
{
- const uint8_t op = flash->chip->wrea_override ? : JEDEC_WRITE_EXT_ADDR_REG;
+ uint8_t op;
+ if (flash->chip->feature_bits & FEATURE_4BA_EAR_C5C8) {
+ op = JEDEC_WRITE_EXT_ADDR_REG;
+ } else if (flash->chip->feature_bits & FEATURE_4BA_EAR_1716) {
+ op = ALT_WRITE_EXT_ADDR_REG_17;
+ } else {
+ msg_cerr("Flash misses feature flag for extended-address register.\n");
+ return -1;
+ }
+
struct spi_command cmds[] = {
{
.readarr = 0,
@@ -394,7 +403,7 @@
cmd_buf[4] = (addr >> 0) & 0xff;
return 4;
} else {
- if (flash->chip->feature_bits & FEATURE_4BA_EAR_C5C8) {
+ if (flash->chip->feature_bits & FEATURE_4BA_EAR_ANY) {
if (spi_set_extended_address(flash, addr >> 24))
return -1;
} else if (addr >> 24) {
To view, visit change 64636. To unsubscribe, or for help writing mail filters, visit settings.