Edward O'Callaghan has uploaded this change for review.
realtek_mst_i2c_spi.c: Remove reset from init fn
Remove MCU reset on init as this was only introduced
when MCU fw requirements for correct flashing were unknown
however it turns out no MCU fw is required to flash and so
no MCU reset should occur upon initialization.
Change-Id: Ia03f94effc4b720964638c032bbde5acfb13960d
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
---
M realtek_mst_i2c_spi.c
1 file changed, 0 insertions(+), 5 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/96/45896/1
diff --git a/realtek_mst_i2c_spi.c b/realtek_mst_i2c_spi.c
index 6158524..7867528 100644
--- a/realtek_mst_i2c_spi.c
+++ b/realtek_mst_i2c_spi.c
@@ -450,11 +450,6 @@
if (fd < 0)
return fd;
- /* Ensure we are in a known state before entering ISP mode */
- ret |= realtek_mst_i2c_spi_reset_mpu(fd);
- if (ret)
- return ret;
-
ret |= realtek_mst_i2c_spi_enter_isp_mode(fd);
if (ret)
return ret;
To view, visit change 45896. To unsubscribe, or for help writing mail filters, visit settings.