Attention is currently required from: Felix Singer, Nico Huber, Thomas Heijligen, Angel Pons, Alexander Goncharov.

View Change

2 comments:

• File flashrom.8.tmpl:

  • Patch Set #13, Line 1580:

    .SS
    .BR "mediatek_i2c_spi " programmer
    .IP
    This programmer supports SPI flash programming for chips attached to some
    Mediatek display controllers, themselves accessed through I2C (tunneling
    SPI flash commands through an I2C connection with the host).
    .sp
    The programmer is designed to support the TSUMOP82JUQ integrated display driver
    and scaler as used in the Google Meet Series One Desk 27 (which runs a version
    of ChromeOS and uses flashrom in its \fBtsum-scaler-updater\fP scripts that
    ship with the OS). Other chips may use compatible protocols but have not been
    tested with this programmer, and external chip IOs may need to be controlled
    through other non-flashrom means to configure the chip in order for it to
    operate as expected.
    .sp
    \fBdevpath\fP and \fBbus\fP options select the I2C bus to use, as described
    previously. \fBallow_brick\fP defaults to no, and must explicitly be set to
    "yes" in order for the programmer to operate. This is required because there is
    no mechanism in the driver to positively identify that a given I2C bus is
    actually connected to a supported device.
    

    Yep, definitely a bad rebase.

    Yup, sorry for the noise.

  • Patch Set #13, Line 1528: .BR "realtek_mst_i2c_spi " and " parade_lspcon " programmers

    Bad rebase? Why are docs about `mediatek_i2c_spi` gone?

    Done

To view, visit change 67878. To unsubscribe, or for help writing mail filters, visit settings.