Attention is currently required from: Anastasia Klimchuk, Thomas Heijligen.
Dreg uploaded patch set #2 to this change.
buspirate_spi: Add support for hiz output with pullups=off
When working with low-voltage chips, the internal 10k pull-ups of the Bus Pirate might be too high. In such cases, it's necessary to create an external pull-up using lower-value resistors. For this, you can use the ``hiz`` parameter. This way, the Bus Pirate will operate as an open drain
Change-Id: I6d9909b23782ef3fcb1428fd127dae0d6b211855
Signed-off-by: David Reguera Garcia <dreg@rootkit.es>
---
M buspirate_spi.c
M doc/classic_cli_manpage.rst
2 files changed, 22 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/99/79299/2
To view, visit change 79299. To unsubscribe, or for help writing mail filters, visit settings.