Nico Huber submitted this change.

View Change

Approvals: build bot (Jenkins): Verified Angel Pons: Looks good to me, approved
flashchips: Add W25Q64JV

I have successfully tested it with FT2232H-programmer.

Change-Id: Ia9a32146b225eca66e9a6bfef45be5f2b24aef46
Signed-off-by: Simon Buhrow <simon.buhrow@posteo.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/58971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
---
M flashchips.c
M flashchips.h
2 files changed, 41 insertions(+), 0 deletions(-)

diff --git a/flashchips.c b/flashchips.c
index 434c46d..21eeb39 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -17869,6 +17869,46 @@

{
.vendor = "Winbond",
+ .name = "W25Q64JV",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25Q64JV,
+ .total_size = 8192,
+ .page_size = 256,
+ /* supports SFDP */
+ /* QPI enable 0x38 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp2_tb_bpl,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Winbond",
.name = "W25Q64.W",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
diff --git a/flashchips.h b/flashchips.h
index e190dca..ba97719 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -976,6 +976,7 @@
#define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */
#define WINBOND_NEX_W25Q128_W 0x6018 /* W25Q128FW; W25Q128FV in QPI mode */
#define WINBOND_NEX_W25Q256_W 0x6019 /* W25Q256JW */
+#define WINBOND_NEX_W25Q64JV 0x7017 /* W25Q64JV */
#define WINBOND_NEX_W25Q128_V_M 0x7018 /* W25Q128JVSM */
#define WINBOND_NEX_W25Q256JV_M 0x7019 /* W25Q256JV_M (QE=0) */
#define WINBOND_NEX_W25Q32JW_M 0x8016 /* W25Q32JW...M */

To view, visit change 58971. To unsubscribe, or for help writing mail filters, visit settings.

Gerrit-Project: flashrom
Gerrit-Branch: master
Gerrit-Change-Id: Ia9a32146b225eca66e9a6bfef45be5f2b24aef46
Gerrit-Change-Number: 58971
Gerrit-PatchSet: 3
Gerrit-Owner: Simon Buhrow
Gerrit-Reviewer: Angel Pons <th3fanbus@gmail.com>
Gerrit-Reviewer: Nico Huber <nico.h@gmx.de>
Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org>
Gerrit-MessageType: merged