Anastasia Klimchuk has uploaded this change for review.
digilent_spi.c: Refactor singleton states into reentrant pattern
Move global singleton states into a struct and store within
the spi_master data field for the life-time of the driver.
This is one of the steps on the way to move spi_master data
memory management behind the initialisation API, for more
context see other patches under the same topic "register_master_api".
BUG=b:185191942
TEST=builds
Change-Id: I91b842913d4402a4a1bec896f19c2fe1f34772b1
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
---
M digilent_spi.c
1 file changed, 58 insertions(+), 47 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/12/54012/1
diff --git a/digilent_spi.c b/digilent_spi.c
index 0f7a9da..91a28b0 100644
--- a/digilent_spi.c
+++ b/digilent_spi.c
@@ -45,8 +45,10 @@
#define DATA_WRITE_EP 0x03
#define DATA_READ_EP 0x84
-static struct libusb_device_handle *handle = NULL;
-static bool reset_board;
+struct digilent_spi_data {
+ struct libusb_device_handle *handle;
+ bool reset_board;
+};
#define DIGILENT_VID 0x1443
#define DIGILENT_JTAG_PID 0x0007
@@ -97,7 +99,7 @@
CMD_SPI_TX_END = 0x87,
};
-static int do_command(uint8_t *req, int req_len, uint8_t *res, int res_len)
+static int do_command(uint8_t *req, int req_len, uint8_t *res, int res_len, struct libusb_device_handle *handle)
{
int tx_len = 0;
int ret;
@@ -133,41 +135,41 @@
return 0;
}
-static int gpio_open(void)
+static int gpio_open(struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_OPEN, 0x00 };
uint8_t res[2];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int gpio_set_dir(uint8_t direction)
+static int gpio_set_dir(uint8_t direction, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_SET_DIR, 0x00,
direction, 0x00, 0x00, 0x00 };
uint8_t res[6];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int gpio_set_value(uint8_t value)
+static int gpio_set_value(uint8_t value, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_SET_VAL, 0x00,
value, 0x00, 0x00, 0x00 };
uint8_t res[2];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int spi_open(void)
+static int spi_open(struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_OPEN, 0x00 };
uint8_t res[2];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int spi_set_speed(uint32_t speed)
+static int spi_set_speed(uint32_t speed, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_SPEED, 0x00,
(speed) & 0xff,
@@ -178,7 +180,7 @@
uint32_t real_speed;
int ret;
- ret = do_command(req, sizeof(req), res, sizeof(res));
+ ret = do_command(req, sizeof(req), res, sizeof(res), handle);
if (ret)
return ret;
@@ -189,23 +191,23 @@
return 0;
}
-static int spi_set_mode(uint8_t mode)
+static int spi_set_mode(uint8_t mode, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_MODE, 0x00, mode };
uint8_t res[2];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int spi_set_cs(uint8_t cs)
+static int spi_set_cs(uint8_t cs, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_CS, 0x00, cs };
uint8_t res[2];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int spi_start_io(uint8_t read_follows, uint32_t write_len)
+static int spi_start_io(uint8_t read_follows, uint32_t write_len, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_START_IO, 0x00,
0x00, 0x00, /* meaning unknown */
@@ -216,17 +218,17 @@
(write_len >> 24) & 0xff };
uint8_t res[2];
- return do_command(req, sizeof(req), res, sizeof(res));
+ return do_command(req, sizeof(req), res, sizeof(res), handle);
}
-static int spi_tx_end(uint8_t read_follows, uint32_t tx_len)
+static int spi_tx_end(uint8_t read_follows, uint32_t tx_len, struct libusb_device_handle *handle)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_TX_END, 0x00 };
uint8_t res[read_follows ? 10 : 6];
int ret;
uint32_t count;
- ret = do_command(req, sizeof(req), res, sizeof(res));
+ ret = do_command(req, sizeof(req), res, sizeof(res), handle);
if (ret != 0)
return ret;
@@ -265,19 +267,20 @@
int tx_len = 0;
uint8_t buf[len];
uint8_t read_follows = readcnt > 0 ? 1 : 0;
+ struct digilent_spi_data *digilent_data = flash->mst->spi.data;
memcpy(buf, writearr, writecnt);
memset(buf + writecnt, 0xff, readcnt);
- ret = spi_set_cs(0);
+ ret = spi_set_cs(0, digilent_data->handle);
if (ret != 0)
return ret;
- ret = spi_start_io(read_follows, writecnt);
+ ret = spi_start_io(read_follows, writecnt, digilent_data->handle);
if (ret != 0)
return ret;
- ret = libusb_bulk_transfer(handle, DATA_WRITE_EP, buf, len, &tx_len, USB_TIMEOUT);
+ ret = libusb_bulk_transfer(digilent_data->handle, DATA_WRITE_EP, buf, len, &tx_len, USB_TIMEOUT);
if (ret != 0) {
msg_perr("%s: failed to write data: '%s'\n", __func__, libusb_error_name(ret));
return -1;
@@ -288,7 +291,7 @@
}
if (read_follows) {
- ret = libusb_bulk_transfer(handle, DATA_READ_EP, buf, len, &tx_len, USB_TIMEOUT);
+ ret = libusb_bulk_transfer(digilent_data->handle, DATA_READ_EP, buf, len, &tx_len, USB_TIMEOUT);
if (ret != 0) {
msg_perr("%s: failed to read data: '%s'\n", __func__, libusb_error_name(ret));
return -1;
@@ -299,11 +302,11 @@
}
}
- ret = spi_tx_end(read_follows, len);
+ ret = spi_tx_end(read_follows, len, digilent_data->handle);
if (ret != 0)
return ret;
- ret = spi_set_cs(1);
+ ret = spi_set_cs(1, digilent_data->handle);
if (ret != 0)
return ret;
@@ -312,7 +315,7 @@
return 0;
}
-static const struct spi_master spi_master_digilent_spi = {
+static struct spi_master spi_master_digilent_spi = {
.features = SPI_MASTER_4BA,
.max_data_read = 252,
.max_data_write = 252,
@@ -326,16 +329,18 @@
static int digilent_spi_shutdown(void *data)
{
- if (reset_board)
- gpio_set_dir(0);
+ struct digilent_spi_data *digilent_data = data;
- libusb_close(handle);
- handle = NULL;
+ if (digilent_data->reset_board)
+ gpio_set_dir(0, digilent_data->handle);
+ libusb_close(digilent_data->handle);
+
+ free(data);
return 0;
}
-static bool default_reset(void)
+static bool default_reset(struct libusb_device_handle *handle)
{
char board[17];
@@ -373,11 +378,8 @@
char *p;
uint32_t speed_hz = spispeeds[0].speed;
int i;
-
- if (handle != NULL) {
- msg_cerr("%s: handle already set! Please report a bug at flashrom@flashrom.org\n", __func__);
- return -1;
- }
+ struct libusb_device_handle *handle = NULL;
+ bool reset_board;
int32_t ret = libusb_init(NULL);
if (ret < 0) {
@@ -425,32 +427,41 @@
if (p && strlen(p))
reset_board = (p[0] == '1');
else
- reset_board = default_reset();
+ reset_board = default_reset(handle);
free(p);
+
if (reset_board) {
- if (gpio_open() != 0)
+ if (gpio_open(handle) != 0)
goto close_handle;
- if (gpio_set_dir(1) != 0)
+ if (gpio_set_dir(1, handle) != 0)
goto close_handle;
- if (gpio_set_value(0) != 0)
+ if (gpio_set_value(0, handle) != 0)
goto close_handle;
}
- if (spi_open() != 0)
+ if (spi_open(handle) != 0)
goto close_handle;
- if (spi_set_speed(speed_hz) != 0)
+ if (spi_set_speed(speed_hz, handle) != 0)
goto close_handle;
- if (spi_set_mode(0x00) != 0)
+ if (spi_set_mode(0x00, handle) != 0)
goto close_handle;
- register_shutdown(digilent_spi_shutdown, NULL);
+ struct digilent_spi_data *digilent_data = calloc(1, sizeof(*digilent_data));
+ if (!digilent_data) {
+ msg_perr("Unable to allocate space for SPI master data\n");
+ goto close_handle;
+ }
+ digilent_data->reset_board = reset_board;
+ digilent_data->handle = handle;
+ spi_master_digilent_spi.data = digilent_data;
+
+ register_shutdown(digilent_spi_shutdown, digilent_data);
register_spi_master(&spi_master_digilent_spi);
return 0;
close_handle:
libusb_close(handle);
- handle = NULL;
return -1;
}
To view, visit change 54012. To unsubscribe, or for help writing mail filters, visit settings.