Anastasia Klimchuk has uploaded this change for review.
serprog.c: Separate shutdown from failed init cleanup
Shutdown function was covering two different jobs here: 1) the actual
shutdown which is run at the end of the driver's lifecycle and
2) cleanup in cases when initialisation failed. Now, shutdown is only
doing its main job (#1), and the driver itself is doing cleanup
when init fails (#2).
The good thing is that now resources are released/closed immediately
in cases when init fails (vs shutdown function which was run at some
point later), and the driver leaves clean space after itself if init
fails.
And very importantly this unlocks API change which plans to move
register_shutdown inside register master API, see
https://review.coreboot.org/c/flashrom/+/51761
BUG=b:185191942
TEST=builds
Change-Id: Idf4ed62c19667e18cc807913180c48cb8c978805
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
---
M serprog.c
1 file changed, 27 insertions(+), 22 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/61/54861/1
diff --git a/serprog.c b/serprog.c
index e6028aa..a70a289 100644
--- a/serprog.c
+++ b/serprog.c
@@ -635,33 +635,30 @@
return 1;
}
- if (register_shutdown(serprog_shutdown, NULL))
- return 1;
-
msg_pdbg(MSGHEADER "connected - attempting to synchronize\n");
sp_check_avail_automatic = 0;
if (sp_synchronize())
- return 1;
+ goto init_err_cleanup_exit;
msg_pdbg(MSGHEADER "Synchronized\n");
if (sp_docommand(S_CMD_Q_IFACE, 0, NULL, 2, &iface)) {
msg_perr("Error: NAK to query interface version\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (iface != 1) {
msg_perr("Error: Unknown interface version: %d\n", iface);
- return 1;
+ goto init_err_cleanup_exit;
}
msg_pdbg(MSGHEADER "Interface version ok.\n");
if (sp_docommand(S_CMD_Q_CMDMAP, 0, NULL, 32, sp_cmdmap)) {
msg_perr("Error: query command map not supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
sp_check_avail_automatic = 1;
@@ -688,10 +685,10 @@
if (sp_check_commandavail(S_CMD_O_SPIOP) == 0) {
msg_perr("Error: SPI operation not supported while the "
"bustype is SPI\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL))
- return 1;
+ goto init_err_cleanup_exit;
/* Success of any of these commands is optional. We don't need
the programmer to tell us its limits, but if it doesn't, we
will assume stuff, so it's in the programmers best interest
@@ -727,7 +724,7 @@
if (errno != 0 || spispeed == f_spi_suffix) {
msg_perr("Error: Could not convert 'spispeed'.\n");
free(spispeed);
- return 1;
+ goto init_err_cleanup_exit;
}
if (strlen(f_spi_suffix) == 1) {
if (!strcasecmp(f_spi_suffix, "M"))
@@ -737,12 +734,12 @@
else {
msg_perr("Error: Garbage following 'spispeed' value.\n");
free(spispeed);
- return 1;
+ goto init_err_cleanup_exit;
}
} else if (strlen(f_spi_suffix) > 1) {
msg_perr("Error: Garbage following 'spispeed' value.\n");
free(spispeed);
- return 1;
+ goto init_err_cleanup_exit;
}
buf[0] = (f_spi_req >> (0 * 8)) & 0xFF;
@@ -765,38 +762,38 @@
free(spispeed);
bt = serprog_buses_supported;
if (sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL))
- return 1;
+ goto init_err_cleanup_exit;
}
if (serprog_buses_supported & BUS_NONSPI) {
if (sp_check_commandavail(S_CMD_O_INIT) == 0) {
msg_perr("Error: Initialize operation buffer "
"not supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (sp_check_commandavail(S_CMD_O_DELAY) == 0) {
msg_perr("Error: Write to opbuf: "
"delay not supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
/* S_CMD_O_EXEC availability checked later. */
if (sp_check_commandavail(S_CMD_R_BYTE) == 0) {
msg_perr("Error: Single byte read not supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
/* This could be translated to single byte reads (if missing),
* but now we don't support that. */
if (sp_check_commandavail(S_CMD_R_NBYTES) == 0) {
msg_perr("Error: Read n bytes not supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (sp_check_commandavail(S_CMD_O_WRITEB) == 0) {
msg_perr("Error: Write to opbuf: "
"write byte not supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (sp_docommand(S_CMD_Q_WRNMAXLEN, 0, NULL, 3, rbuf)) {
@@ -815,7 +812,7 @@
if (!sp_write_n_buf) {
msg_perr("Error: cannot allocate memory for "
"Write-n buffer\n");
- return 1;
+ goto init_err_cleanup_exit;
}
sp_write_n_bytes = 0;
}
@@ -853,12 +850,12 @@
if (sp_check_commandavail(S_CMD_O_EXEC) == 0) {
msg_perr("Error: Execute operation buffer not "
"supported\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (sp_docommand(S_CMD_O_INIT, 0, NULL, 0, NULL)) {
msg_perr("Error: NAK to initialize operation buffer\n");
- return 1;
+ goto init_err_cleanup_exit;
}
if (sp_docommand(S_CMD_Q_OPBUF, 0, NULL, 2,
@@ -873,20 +870,28 @@
uint8_t en = 1;
if (sp_docommand(S_CMD_S_PIN_STATE, 1, &en, 0, NULL) != 0) {
msg_perr("Error: could not enable output buffers\n");
- return 1;
+ goto init_err_cleanup_exit;
} else
msg_pdbg(MSGHEADER "Output drivers enabled\n");
} else
msg_pdbg(MSGHEADER "Warning: Programmer does not support toggling its output drivers\n");
+
sp_prev_was_write = 0;
sp_streamed_transmit_ops = 0;
sp_streamed_transmit_bytes = 0;
sp_opbuf_usage = 0;
+
+ if (register_shutdown(serprog_shutdown, NULL))
+ goto init_err_cleanup_exit;
if (serprog_buses_supported & BUS_SPI)
register_spi_master(&spi_master_serprog, NULL);
if (serprog_buses_supported & BUS_NONSPI)
register_par_master(&par_master_serprog, serprog_buses_supported & BUS_NONSPI, NULL);
return 0;
+
+init_err_cleanup_exit:
+ serprog_shutdown(NULL);
+ return 1;
}
void serprog_delay(unsigned int usecs)
To view, visit change 54861. To unsubscribe, or for help writing mail filters, visit settings.