Anton Samsonov has uploaded this change for review.

View Change

flashchips: Add Zetta Device ZD25LQ128

Datasheet: http://www.zettadevice.com/uploads/files/163410630201e3483211247ac1.pdf

Tested probe, read, erase, write, verify on ZD25LQ128AWIG chips
using Linux SPI and DediProg SF100 programmers.

Renamed ZETTADEVICE_ macros to ZETTA_ to accomodate longer suffixes.

Change-Id: I5cb20158e81ab109f16958285b8787858efb4831
Signed-off-by: Anton Samsonov <devel@zxlab.ru>
---
M flashchips.c
M include/flashchips.h
2 files changed, 46 insertions(+), 7 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/92/81392/1

diff --git a/flashchips.c b/flashchips.c
index 204f34f..74953d1 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -21593,8 +21593,8 @@
 		.vendor		= "Zetta Device",
 		.name		= "ZD25D20",
 		.bustype	= BUS_SPI,
-		.manufacture_id	= ZETTADEVICE_ID,
-		.model_id	= ZETTADEVICE_ZD25D20,
+		.manufacture_id	= ZETTA_ID,
+		.model_id	= ZETTA_ZD25D20,
 		.total_size	= 256,
 		.page_size	= 256,
 		.feature_bits	= FEATURE_WRSR_WREN,
@@ -21631,8 +21631,8 @@
 		.vendor		= "Zetta Device",
 		.name		= "ZD25D40",
 		.bustype	= BUS_SPI,
-		.manufacture_id	= ZETTADEVICE_ID,
-		.model_id	= ZETTADEVICE_ZD25D40,
+		.manufacture_id	= ZETTA_ID,
+		.model_id	= ZETTA_ZD25D40,
 		.total_size	= 512,
 		.page_size	= 256,
 		.feature_bits	= FEATURE_WRSR_WREN,
@@ -21666,6 +21666,44 @@
 	},
 
 	{
+		.vendor		= "Zetta Device",
+		.name		= "ZD25LQ128",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ZETTA_ID,
+		.model_id	= ZETTA_ZD25LQ128_REMS,
+		.total_size	= 16384,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_OK_PREW,
+		.probe		= PROBE_SPI_REMS,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 4096} },
+				.block_erase = SPI_BLOCK_ERASE_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 512} },
+				.block_erase = SPI_BLOCK_ERASE_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 256} },
+				.block_erase = SPI_BLOCK_ERASE_D8,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_60,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_C7,
+			}
+		},
+		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
+		.unlock		= SPI_DISABLE_BLOCKPROTECT,
+		.write		= SPI_CHIP_WRITE256,
+		.read		= SPI_CHIP_READ,
+		.voltage	= {1650, 1950},
+	},
+
+	{
 		.vendor		= "Unknown",
 		.name		= "SFDP-capable chip",
 		.bustype	= BUS_SPI,
diff --git a/include/flashchips.h b/include/flashchips.h
index d0a858b..932e458 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -1055,8 +1055,9 @@
 #define XTX_XT25F02E		0x4012
 #define XTX_XT25F64B		0x4017
 
-#define ZETTADEVICE_ID          0xBA	/* Zetta Device */
-#define ZETTADEVICE_ZD25D20     0x2012
-#define ZETTADEVICE_ZD25D40     0x2013
+#define ZETTA_ID		0xBA	/* Zetta Device */
+#define ZETTA_ZD25D20		0x2012
+#define ZETTA_ZD25D40		0x2013
+#define ZETTA_ZD25LQ128_REMS	0x17	/* RDID = 0x4218 */
 
 #endif /* !FLASHCHIPS_H */

To view, visit change 81392. To unsubscribe, or for help writing mail filters, visit settings.