Elyes HAOUAS has uploaded this change for review.

View Change

Remove unneeded white spaces

Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
---
M board_enable.c
M buspirate_spi.c
M dediprog.c
M flashchips.c
M ichspi.c
M pcidev.c
M serprog.c
7 files changed, 12 insertions(+), 12 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/80/25380/1
diff --git a/board_enable.c b/board_enable.c
index 5e8f4dd..cf19c95 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -547,7 +547,7 @@
}
} else {
msg_pinfo("BIOS ROM is disabled\n");
- }
+ }
w836xx_ext_leave(port);
}

diff --git a/buspirate_spi.c b/buspirate_spi.c
index f825415..bfbdc6a 100644
--- a/buspirate_spi.c
+++ b/buspirate_spi.c
@@ -42,7 +42,7 @@
{
/* 115200bps, 8 databits, no parity, 1 stopbit */
sp_fd = sp_openserport(dev, BP_DEFAULTBAUD);
- if (sp_fd == SER_INV_FD)
+ if (sp_fd == SER_INV_FD)
return 1;
return 0;
}
@@ -661,4 +661,4 @@
memcpy(readarr, bp_commbuf + 1, readcnt);

return ret;
-}
\ No newline at end of file
+}
diff --git a/dediprog.c b/dediprog.c
index 2f5b441..0982f0f 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -458,8 +458,8 @@
if (!transfers[i]) {
msg_perr("Allocating libusb transfer %i failed: %s!\n", i, libusb_error_name(ret));
goto err_free;
- }
- }
+ }
+ }

/* Now transfer requested chunks using libusb's asynchronous interface. */
while (!status.error && (status.queued_idx < count)) {
diff --git a/flashchips.c b/flashchips.c
index 46e8807..c2f09ba 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -3030,7 +3030,7 @@
}
},
.printlock = printlock_at49f,
- .write = write_jedec_1,
+ .write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
@@ -13795,7 +13795,7 @@
.name = "SST49LF080A",
.bustype = BUS_LPC, /* A/A Mux */
.manufacture_id = SST_ID,
- .model_id = SST_SST49LF080A,
+ .model_id = SST_SST49LF080A,
.total_size = 1024,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
diff --git a/ichspi.c b/ichspi.c
index 5fe25f6..5abc5f8 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -712,7 +712,7 @@
bbar_off = ICH9_REG_BBAR;
break;
}
-
+
ichspi_bbar = mmio_readl(ich_spibar + bbar_off) & ~BBAR_MASK;
if (ichspi_bbar) {
msg_pdbg("Reserved bits in BBAR not zero: 0x%08x\n",
@@ -737,7 +737,7 @@
* may even crash.
*/
static void ich_read_data(uint8_t *data, int len, int reg0_off)
- {
+{
int i;
uint32_t temp32 = 0;

diff --git a/pcidev.c b/pcidev.c
index f4e5542..24b7aa1 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -325,13 +325,13 @@
register_undo_pci_write_byte(dev, reg);
return pci_write_byte(dev, reg, data);
}
-
+
int rpci_write_word(struct pci_dev *dev, int reg, uint16_t data)
{
register_undo_pci_write_word(dev, reg);
return pci_write_word(dev, reg, data);
}
-
+
int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data)
{
register_undo_pci_write_long(dev, reg);
diff --git a/serprog.c b/serprog.c
index 62f2820..c5a35b4 100644
--- a/serprog.c
+++ b/serprog.c
@@ -662,7 +662,7 @@
}
msg_pdbg(MSGHEADER "operation buffer size is %d\n",
sp_device_opbuf_size);
- }
+ }

if (sp_check_commandavail(S_CMD_S_PIN_STATE)) {
uint8_t en = 1;

To view, visit change 25380. To unsubscribe, or for help writing mail filters, visit settings.

Gerrit-Project: flashrom
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113
Gerrit-Change-Number: 25380
Gerrit-PatchSet: 1
Gerrit-Owner: Elyes HAOUAS <ehaouas@noos.fr>