Patrick Georgi has uploaded this change for review.

View Change

build system: Replace Makefile with a call to use meson

Change-Id: Ice42ab92a36c54f8f446f58dd73f628994f179d6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
---
M Makefile
1 file changed, 1 insertion(+), 1,723 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/75/46875/1

diff --git a/Makefile b/Makefile
index 241814a..40bbe35 100644
--- a/Makefile
+++ b/Makefile
@@ -1,1723 +1 @@
-#
-# This file is part of the flashrom project.
-#
-# Copyright (C) 2005 coresystems GmbH <stepan@coresystems.de>
-# Copyright (C) 2009,2010,2012 Carl-Daniel Hailfinger
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-
-PROGRAM = flashrom
-
-###############################################################################
-# Defaults for the toolchain.
-
-# If you want to cross-compile, just run e.g.
-# make CC=i586-pc-msdosdjgpp-gcc
-# You may have to specify STRIP/AR/RANLIB as well.
-#
-# Note for anyone editing this Makefile: gnumake will happily ignore any
-# changes in this Makefile to variables set on the command line.
-STRIP   ?= strip
-INSTALL = install
-DIFF    = diff
-PREFIX  ?= /usr/local
-MANDIR  ?= $(PREFIX)/share/man
-CFLAGS  ?= -Os -Wall -Wextra -Wno-unused-parameter -Wshadow -Wmissing-prototypes -Wwrite-strings
-EXPORTDIR ?= .
-RANLIB  ?= ranlib
-PKG_CONFIG ?= pkg-config
-BUILD_DETAILS_FILE ?= build_details.txt
-
-# The following parameter changes the default programmer that will be used if there is no -p/--programmer
-# argument given when running flashrom. The predefined setting does not enable any default so that every
-# user has to declare the programmer he wants to use on every run. The rationale for this to be not set
-# (to e.g. the internal programmer) is that forgetting to specify this when working with another programmer
-# easily puts the system attached to the default programmer at risk (e.g. you want to flash coreboot to another
-# system attached to an external programmer while the default programmer is set to the internal programmer, and
-# you forget to use the -p parameter. This would (try to) overwrite the existing firmware of the computer
-# running flashrom). Please do not enable this without thinking about the possible consequences. Possible
-# values are those specified in enum programmer in programmer.h (which depend on other CONFIG_* options
-# evaluated below, namely those that enable/disable the various programmers).
-# Compilation will fail for unspecified values.
-CONFIG_DEFAULT_PROGRAMMER ?= PROGRAMMER_INVALID
-# The following adds a default parameter for the default programmer set above (only).
-CONFIG_DEFAULT_PROGRAMMER_ARGS ?= ''
-# Example: compiling with
-#   make CONFIG_DEFAULT_PROGRAMMER=PROGRAMMER_SERPROG CONFIG_DEFAULT_PROGRAMMER_ARGS="dev=/dev/ttyUSB0:1500000"
-# would make executing './flashrom' (almost) equivialent to './flashrom -p serprog:dev=/dev/ttyUSB0:1500000'.
-
-# If your compiler spits out excessive warnings, run make WARNERROR=no
-# You shouldn't have to change this flag.
-WARNERROR ?= yes
-
-ifeq ($(WARNERROR), yes)
-CFLAGS += -Werror
-endif
-
-ifdef LIBS_BASE
-PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig
-override CPPFLAGS += -I$(LIBS_BASE)/include
-override LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib
-endif
-
-ifeq ($(CONFIG_STATIC),yes)
-override PKG_CONFIG += --static
-override LDFLAGS += -static
-endif
-
-# Set LC_ALL=C to minimize influences of the locale.
-# However, this won't work for the majority of relevant commands because they use the $(shell) function and
-# GNU make does not relay variables exported within the makefile to their evironment.
-LC_ALL=C
-export LC_ALL
-
-dummy_for_make_3_80:=$(shell printf "Build started on %s\n\n" "$$(date)" >$(BUILD_DETAILS_FILE))
-
-# Provide an easy way to execute a command, print its output to stdout and capture any error message on stderr
-# in the build details file together with the original stdout output.
-debug_shell = $(shell export LC_ALL=C ; { echo 'exec: export LC_ALL=C ; { $(subst ','\'',$(1)) ; }' >&2; \
-    { $(1) ; } | tee -a $(BUILD_DETAILS_FILE) ; echo >&2 ; } 2>>$(BUILD_DETAILS_FILE))
-
-###############################################################################
-# General OS-specific settings.
-# 1. Prepare for later by gathering information about host and target OS
-# 2. Set compiler flags and parameters according to OSes
-# 3. Likewise verify user-supplied CONFIG_* variables.
-
-# HOST_OS is only used to work around local toolchain issues.
-HOST_OS ?= $(shell uname)
-ifeq ($(findstring MINGW, $(HOST_OS)), MINGW)
-# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found".
-CC = gcc
-endif
-
-ifneq ($(HOST_OS), SunOS)
-STRIP_ARGS = -s
-endif
-
-# Determine the destination OS.
-# IMPORTANT: The following line must be placed before TARGET_OS is ever used
-# (of course), but should come after any lines setting CC because the line
-# below uses CC itself.
-override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null \
-    | tail -1 | cut -f 2 -d'"'))
-
-ifeq ($(TARGET_OS), Darwin)
-override CPPFLAGS += -I/opt/local/include -I/usr/local/include
-override LDFLAGS += -L/opt/local/lib -L/usr/local/lib
-endif
-
-ifeq ($(TARGET_OS), FreeBSD)
-override CPPFLAGS += -I/usr/local/include
-override LDFLAGS += -L/usr/local/lib
-endif
-
-ifeq ($(TARGET_OS), OpenBSD)
-override CPPFLAGS += -I/usr/local/include
-override LDFLAGS += -L/usr/local/lib
-endif
-
-ifeq ($(TARGET_OS), NetBSD)
-override CPPFLAGS += -I/usr/pkg/include
-override LDFLAGS += -L/usr/pkg/lib
-endif
-
-ifeq ($(TARGET_OS), DragonFlyBSD)
-override CPPFLAGS += -I/usr/local/include
-override LDFLAGS += -L/usr/local/lib
-endif
-
-ifeq ($(TARGET_OS), DOS)
-EXEC_SUFFIX := .exe
-# DJGPP has odd uint*_t definitions which cause lots of format string warnings.
-override CFLAGS += -Wno-format
-LIBS += -lgetopt
-# Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support).
-ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes
-else
-override CONFIG_BUSPIRATE_SPI = no
-endif
-ifeq ($(CONFIG_SERPROG), yes)
-UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
-else
-override CONFIG_SERPROG = no
-endif
-ifeq ($(CONFIG_PONY_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
-else
-override CONFIG_PONY_SPI = no
-endif
-# Digilent SPI, Dediprog, Developerbox, USB-Blaster, PICkit2, CH341A and FT2232 are not supported under DOS (missing USB support).
-ifeq ($(CONFIG_DIGILENT_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_DIGILENT_SPI=yes
-else
-override CONFIG_DIGILENT_SPI = no
-endif
-ifeq ($(CONFIG_DEDIPROG), yes)
-UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
-else
-override CONFIG_DEDIPROG = no
-endif
-ifeq ($(CONFIG_DEVELOPERBOX_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_DEVELOPERBOX_SPI=yes
-else
-override CONFIG_DEVELOPERBOX_SPI = no
-endif
-ifeq ($(CONFIG_ENE_LPC), yes)
-UNSUPPORTED_FEATURES += CONFIG_ENE_LPC=yes
-else
-override CONFIG_ENE_LPC = no
-endif
-ifeq ($(CONFIG_FT2232_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
-else
-override CONFIG_FT2232_SPI = no
-endif
-ifeq ($(CONFIG_MEC1308), yes)
-UNSUPPORTED_FEATURES += CONFIG_MEC1308=yes
-else
-override CONFIG_MEC1308 = no
-endif
-ifeq ($(CONFIG_USBBLASTER_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
-else
-override CONFIG_USBBLASTER_SPI = no
-endif
-ifeq ($(CONFIG_PICKIT2_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes
-else
-override CONFIG_PICKIT2_SPI = no
-endif
-ifeq ($(CONFIG_CH341A_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_CH341A_SPI=yes
-else
-override CONFIG_CH341A_SPI = no
-endif
-ifeq ($(CONFIG_STLINKV3_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_STLINKV3_SPI=yes
-else
-override CONFIG_STLINKV3_SPI = no
-endif
-ifeq ($(CONFIG_LSPCON_I2C_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_LSPCON_I2C_SPI=yes
-else
-override CONFIG_LSPCON_I2C_SPI = no
-endif
-ifeq ($(CONFIG_REALTEK_MST_I2C_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_REALTEK_MST_I2C_SPI=yes
-else
-override CONFIG_REALTEK_MST_I2C_SPI = no
-endif
-# libjaylink is also not available for DOS
-ifeq ($(CONFIG_JLINK_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_JLINK_SPI=yes
-else
-override CONFIG_JLINK_SPI = no
-endif
-endif
-
-# FIXME: Should we check for Cygwin/MSVC as well?
-ifeq ($(TARGET_OS), MinGW)
-EXEC_SUFFIX := .exe
-# MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs().
-FLASHROM_CFLAGS += -Dffs=__builtin_ffs
-# Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that
-# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ */
-FLASHROM_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1
-
-# National Instruments USB-845x is Windows only for now
-CONFIG_NI845X_SPI ?= no
-
-# For now we disable all PCI-based programmers on Windows/MinGW (no libpci).
-ifeq ($(CONFIG_INTERNAL), yes)
-UNSUPPORTED_FEATURES += CONFIG_INTERNAL=yes
-else
-override CONFIG_INTERNAL = no
-endif
-ifeq ($(CONFIG_RAYER_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
-else
-override CONFIG_RAYER_SPI = no
-endif
-ifeq ($(CONFIG_RAIDEN), yes)
-UNSUPPORTED_FEATURES += CONFIG_RAIDEN=yes
-else
-override CONFIG_RAIDEN = no
-endif
-ifeq ($(CONFIG_NIC3COM), yes)
-UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
-else
-override CONFIG_NIC3COM = no
-endif
-ifeq ($(CONFIG_GFXNVIDIA), yes)
-UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
-else
-override CONFIG_GFXNVIDIA = no
-endif
-ifeq ($(CONFIG_SATASII), yes)
-UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
-else
-override CONFIG_SATASII = no
-endif
-ifeq ($(CONFIG_ATAHPT), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
-else
-override CONFIG_ATAHPT = no
-endif
-ifeq ($(CONFIG_ATAVIA), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes
-else
-override CONFIG_ATAVIA = no
-endif
-ifeq ($(CONFIG_ATAPROMISE), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
-else
-override CONFIG_ATAPROMISE = no
-endif
-ifeq ($(CONFIG_ENE_LPC), yes)
-UNSUPPORTED_FEATURES += CONFIG_ENE_LPC=yes
-else
-override CONFIG_ENE_LPC = no
-endif
-ifeq ($(CONFIG_IT8212), yes)
-UNSUPPORTED_FEATURES += CONFIG_IT8212=yes
-else
-override CONFIG_IT8212 = no
-endif
-ifeq ($(CONFIG_DRKAISER), yes)
-UNSUPPORTED_FEATURES += CONFIG_DRKAISER=yes
-else
-override CONFIG_DRKAISER = no
-endif
-ifeq ($(CONFIG_MEC1308), yes)
-UNSUPPORTED_FEATURES += CONFIG_MEC1308=yes
-else
-override CONFIG_MEC1308 = no
-endif
-ifeq ($(CONFIG_NICREALTEK), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
-else
-override CONFIG_NICREALTEK = no
-endif
-ifeq ($(CONFIG_NICNATSEMI), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
-else
-override CONFIG_NICNATSEMI = no
-endif
-ifeq ($(CONFIG_NICINTEL), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICINTEL=yes
-else
-override CONFIG_NICINTEL = no
-endif
-ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICINTEL_EEPROM=yes
-else
-override CONFIG_NICINTEL_EEPROM = no
-endif
-ifeq ($(CONFIG_NICINTEL_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICINTEL_SPI=yes
-else
-override CONFIG_NICINTEL_SPI = no
-endif
-ifeq ($(CONFIG_OGP_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_OGP_SPI=yes
-else
-override CONFIG_OGP_SPI = no
-endif
-ifeq ($(CONFIG_SATAMV), yes)
-UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
-else
-override CONFIG_SATAMV = no
-endif
-ifeq ($(CONFIG_LSPCON_I2C_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_LSPCON_I2C_SPI=yes
-else
-override CONFIG_LSPCON_I2C_SPI = no
-endif
-ifeq ($(CONFIG_REALTEK_MST_I2C_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_REALTEK_MST_I2C_SPI=yes
-else
-override CONFIG_REALTEK_MST_I2C_SPI = no
-endif
-endif
-
-ifneq ($(TARGET_OS), MinGW)
-# NI USB-845x only supported on Windows at the moment
-ifeq ($(CONFIG_NI845X_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_NI845X_SPI=yes
-else
-override CONFIG_NI845X_SPI = no
-endif
-endif
-
-ifeq ($(TARGET_OS), libpayload)
-ifeq ($(MAKECMDGOALS),)
-.DEFAULT_GOAL := libflashrom.a
-$(info Setting default goal to libflashrom.a)
-endif
-FLASHROM_CFLAGS += -DSTANDALONE
-ifeq ($(CONFIG_DUMMY), yes)
-UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes
-else
-override CONFIG_DUMMY = no
-endif
-# libpayload does not provide the romsize field in struct pci_dev that the atapromise code requires.
-ifeq ($(CONFIG_ATAPROMISE), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
-else
-override CONFIG_ATAPROMISE = no
-endif
-# Bus Pirate, Serprog and PonyProg are not supported with libpayload (missing serial support).
-ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes
-else
-override CONFIG_BUSPIRATE_SPI = no
-endif
-ifeq ($(CONFIG_SERPROG), yes)
-UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
-else
-override CONFIG_SERPROG = no
-endif
-ifeq ($(CONFIG_PONY_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
-else
-override CONFIG_PONY_SPI = no
-endif
-# Dediprog, Developerbox, USB-Blaster, PICkit2, CH341A and FT2232 are not supported with libpayload (missing libusb support).
-ifeq ($(CONFIG_DEDIPROG), yes)
-UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
-else
-override CONFIG_DEDIPROG = no
-endif
-ifeq ($(CONFIG_DEVELOPERBOX_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_DEVELOPERBOX_SPI=yes
-else
-override CONFIG_DEVELOPERBOX_SPI = no
-endif
-ifeq ($(CONFIG_ENE_LPC), yes)
-UNSUPPORTED_FEATURES += CONFIG_ENE_LPC=yes
-else
-override CONFIG_ENE_LPC = no
-endif
-ifeq ($(CONFIG_FT2232_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
-else
-override CONFIG_FT2232_SPI = no
-endif
-ifeq ($(CONFIG_MEC1308), yes)
-UNSUPPORTED_FEATURES += CONFIG_MEC1308=yes
-else
-override CONFIG_MEC1308 = no
-endif
-ifeq ($(CONFIG_USBBLASTER_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
-else
-override CONFIG_USBBLASTER_SPI = no
-endif
-ifeq ($(CONFIG_PICKIT2_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes
-else
-override CONFIG_PICKIT2_SPI = no
-endif
-ifeq ($(CONFIG_STLINKV3_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_STLINKV3_SPI=yes
-else
-override CONFIG_STLINKV3_SPI = no
-endif
-ifeq ($(CONFIG_LSPCON_I2C_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_LSPCON_I2C_SPI=yes
-else
-override CONFIG_LSPCON_I2C_SPI = no
-endif
-ifeq ($(CONFIG_REALTEK_MST_I2C_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_REALTEK_MST_I2C_SPI=yes
-else
-override CONFIG_REALTEK_MST_I2C_SPI = no
-endif
-ifeq ($(CONFIG_CH341A_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_CH341A_SPI=yes
-else
-override CONFIG_CH341A_SPI = no
-endif
-endif
-
-ifneq ($(TARGET_OS), Linux)
-# Android is handled internally as separate OS, but it supports CONFIG_LINUX_SPI and CONFIG_MSTARDDC_SPI
-ifneq ($(TARGET_OS), Android)
-ifeq ($(CONFIG_LINUX_MTD), yes)
-UNSUPPORTED_FEATURES += CONFIG_LINUX_MTD=yes
-else
-override CONFIG_LINUX_MTD = no
-endif
-ifeq ($(CONFIG_LINUX_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_LINUX_SPI=yes
-else
-override CONFIG_LINUX_SPI = no
-endif
-ifeq ($(CONFIG_MSTARDDC_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_MSTARDDC_SPI=yes
-else
-override CONFIG_MSTARDDC_SPI = no
-endif
-endif
-endif
-
-ifeq ($(TARGET_OS), Android)
-# Android on x86 (currently) does not provide raw PCI port I/O operations
-ifeq ($(CONFIG_RAYER_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
-else
-override CONFIG_RAYER_SPI = no
-endif
-endif
-
-ifeq ($(TARGET_OS), Linux)
-CONFIG_LINUX_I2C_HELPER = yes
-endif
-
-###############################################################################
-# General architecture-specific settings.
-# Like above for the OS, below we verify user-supplied options depending on the target architecture.
-
-# Determine the destination processor architecture.
-# IMPORTANT: The following line must be placed before ARCH is ever used
-# (of course), but should come after any lines setting CC because the line
-# below uses CC itself.
-override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null \
-    | tail -1 | cut -f 2 -d'"'))
-override ENDIAN := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E endiantest.c 2>/dev/null \
-    | tail -1))
-
-# Disable the internal programmer on unsupported architectures (everything but x86 and mipsel)
-ifneq ($(ARCH)-little, $(filter $(ARCH),x86 mips)-$(ENDIAN))
-ifeq ($(CONFIG_INTERNAL), yes)
-UNSUPPORTED_FEATURES += CONFIG_INTERNAL=yes
-else
-override CONFIG_INTERNAL = no
-endif
-endif
-
-# PCI port I/O support is unimplemented on PPC/MIPS/SPARC and unavailable on ARM.
-# Right now this means the drivers below only work on x86.
-ifneq ($(ARCH), x86)
-ifeq ($(CONFIG_NIC3COM), yes)
-UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
-else
-override CONFIG_NIC3COM = no
-endif
-ifeq ($(CONFIG_NICREALTEK), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
-else
-override CONFIG_NICREALTEK = no
-endif
-ifeq ($(CONFIG_NICNATSEMI), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
-else
-override CONFIG_NICNATSEMI = no
-endif
-ifeq ($(CONFIG_RAYER_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
-else
-override CONFIG_RAYER_SPI = no
-endif
-ifeq ($(CONFIG_ATAHPT), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
-else
-override CONFIG_ATAHPT = no
-endif
-ifeq ($(CONFIG_ATAPROMISE), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
-else
-override CONFIG_ATAPROMISE = no
-endif
-ifeq ($(CONFIG_SATAMV), yes)
-UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
-else
-override CONFIG_SATAMV = no
-endif
-endif
-
-# Disable all drivers needing raw access (memory, PCI, port I/O) on
-# architectures with unknown raw access properties.
-# Right now those architectures are alpha hppa m68k sh s390
-ifneq ($(ARCH),$(filter $(ARCH),x86 mips ppc arm sparc arc))
-ifeq ($(CONFIG_RAYER_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
-else
-override CONFIG_RAYER_SPI = no
-endif
-ifeq ($(CONFIG_NIC3COM), yes)
-UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
-else
-override CONFIG_NIC3COM = no
-endif
-ifeq ($(CONFIG_GFXNVIDIA), yes)
-UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
-else
-override CONFIG_GFXNVIDIA = no
-endif
-ifeq ($(CONFIG_SATASII), yes)
-UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
-else
-override CONFIG_SATASII = no
-endif
-ifeq ($(CONFIG_ATAHPT), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
-else
-override CONFIG_ATAHPT = no
-endif
-ifeq ($(CONFIG_ATAVIA), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes
-else
-override CONFIG_ATAVIA = no
-endif
-ifeq ($(CONFIG_ATAPROMISE), yes)
-UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
-else
-override CONFIG_ATAPROMISE = no
-endif
-ifeq ($(CONFIG_DRKAISER), yes)
-UNSUPPORTED_FEATURES += CONFIG_DRKAISER=yes
-else
-override CONFIG_DRKAISER = no
-endif
-ifeq ($(CONFIG_NICREALTEK), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
-else
-override CONFIG_NICREALTEK = no
-endif
-ifeq ($(CONFIG_NICNATSEMI), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
-else
-override CONFIG_NICNATSEMI = no
-endif
-ifeq ($(CONFIG_NICINTEL), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICINTEL=yes
-else
-override CONFIG_NICINTEL = no
-endif
-ifeq ($(CONFIG_NICINTEL_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICINTEL_SPI=yes
-else
-override CONFIG_NICINTEL_SPI = no
-endif
-ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
-UNSUPPORTED_FEATURES += CONFIG_NICINTEL_EEPROM=yes
-else
-override CONFIG_NICINTEL_EEPROM = no
-endif
-ifeq ($(CONFIG_OGP_SPI), yes)
-UNSUPPORTED_FEATURES += CONFIG_OGP_SPI=yes
-else
-override CONFIG_OGP_SPI = no
-endif
-ifeq ($(CONFIG_SATAMV), yes)
-UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
-else
-override CONFIG_SATAMV = no
-endif
-ifeq ($(CONFIG_IT8212), yes)
-UNSUPPORTED_FEATURES += CONFIG_IT8212=yes
-else
-override CONFIG_IT8212 = no
-endif
-endif
-
-###############################################################################
-# Flash chip drivers and bus support infrastructure.
-
-CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \
-	sst28sf040.o 82802ab.o \
-	sst49lfxxxc.o sst_fwhub.o edi.o flashchips.o spi.o spi25.o spi25_statusreg.o \
-	spi95.o opaque.o sfdp.o en29lv640b.o at45db.o writeprotect.o
-
-###############################################################################
-# Library code.
-
-LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o fmap.o
-
-###############################################################################
-# Frontend related stuff.
-
-CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o
-
-# versioninfo.inc stores metadata required to build a packaged flashrom. It is generated by the export rule and
-# imported below. If versioninfo.inc is not found and the variables are not defined by the user, the info will
-# be obtained using util/getrevision.sh, which is the common case during development.
--include versioninfo.inc
-VERSION ?= $(shell ./util/getrevision.sh --revision)
-MAN_DATE ?= $(shell ./util/getrevision.sh --date $(PROGRAM).8.tmpl 2>/dev/null)
-
-SCMDEF := -D'FLASHROM_VERSION="$(VERSION)"'
-
-# No spaces in release names unless set explicitly
-RELEASENAME ?= $(shell echo "$(VERSION)" | sed -e 's/ /_/')
-
-# Inform user of the version string
-$(info Replacing all version templates with $(VERSION).)
-
-# If a VCS is found then try to install hooks.
-$(shell ./util/getrevision.sh -c 2>/dev/null && ./util/git-hooks/install.sh)
-
-###############################################################################
-# Default settings of CONFIG_* variables.
-
-# Always enable internal/onboard support for now.
-CONFIG_INTERNAL ?= yes
-
-# Always enable serprog for now.
-CONFIG_SERPROG ?= yes
-
-# RayeR SPIPGM hardware support
-CONFIG_RAYER_SPI ?= yes
-
-# ChromiumOS servo DUT debug board hardware support
-CONFIG_RAIDEN ?= yes
-
-# PonyProg2000 SPI hardware support
-CONFIG_PONY_SPI ?= yes
-
-# Always enable 3Com NICs for now.
-CONFIG_NIC3COM ?= yes
-
-# Enable NVIDIA graphics cards. Note: write and erase do not work properly.
-CONFIG_GFXNVIDIA ?= yes
-
-# Always enable SiI SATA controllers for now.
-CONFIG_SATASII ?= yes
-
-# Highpoint (HPT) ATA/RAID controller support.
-# IMPORTANT: This code is not yet working!
-CONFIG_ATAHPT ?= no
-
-# VIA VT6421A LPC memory support
-CONFIG_ATAVIA ?= yes
-
-# Promise ATA controller support.
-CONFIG_ATAPROMISE ?= no
-
-# ENE LPC interface keyboard controller
-CONFIG_ENE_LPC ?= yes
-
-# Always enable FT2232 SPI dongles for now.
-CONFIG_FT2232_SPI ?= yes
-
-# Microchip MEC1308 Embedded Controller
-CONFIG_MEC1308 ?= yes
-
-# Always enable Altera USB-Blaster dongles for now.
-CONFIG_USBBLASTER_SPI ?= yes
-
-# MSTAR DDC support needs more tests/reviews/cleanups.
-CONFIG_MSTARDDC_SPI ?= no
-
-# Always enable PICkit2 SPI dongles for now.
-CONFIG_PICKIT2_SPI ?= yes
-
-# Always enable STLink V3
-CONFIG_STLINKV3_SPI ?= yes
-
-# Disables LSPCON support until the i2c helper supports multiple systems.
-CONFIG_LSPCON_I2C_SPI ?= no
-
-# Disables REALTEK_MST support until the i2c helper supports multiple systems.
-CONFIG_REALTEK_MST_I2C_SPI ?= no
-
-# Always enable dummy tracing for now.
-CONFIG_DUMMY ?= yes
-
-# Always enable Dr. Kaiser for now.
-CONFIG_DRKAISER ?= yes
-
-# Always enable Realtek NICs for now.
-CONFIG_NICREALTEK ?= yes
-
-# Disable National Semiconductor NICs until support is complete and tested.
-CONFIG_NICNATSEMI ?= no
-
-# Always enable Intel NICs for now.
-CONFIG_NICINTEL ?= yes
-
-# Always enable SPI on Intel NICs for now.
-CONFIG_NICINTEL_SPI ?= yes
-
-# Always enable EEPROM on Intel NICs for now.
-CONFIG_NICINTEL_EEPROM ?= yes
-
-# Always enable SPI on OGP cards for now.
-CONFIG_OGP_SPI ?= yes
-
-# Always enable Bus Pirate SPI for now.
-CONFIG_BUSPIRATE_SPI ?= yes
-
-# Always enable Dediprog SF100 for now.
-CONFIG_DEDIPROG ?= yes
-
-# Always enable Developerbox emergency recovery for now.
-CONFIG_DEVELOPERBOX_SPI ?= yes
-
-# Always enable Marvell SATA controllers for now.
-CONFIG_SATAMV ?= yes
-
-# Enable Linux spidev and MTD interfaces by default. We disable them on non-Linux targets.
-CONFIG_LINUX_MTD ?= yes
-CONFIG_LINUX_SPI ?= yes
-
-# Always enable ITE IT8212F PATA controllers for now.
-CONFIG_IT8212 ?= yes
-
-# Winchiphead CH341A
-CONFIG_CH341A_SPI ?= yes
-
-# Digilent Development board JTAG
-CONFIG_DIGILENT_SPI ?= yes
-
-# Disable J-Link for now.
-CONFIG_JLINK_SPI ?= no
-
-# Disable wiki printing by default. It is only useful if you have wiki access.
-CONFIG_PRINT_WIKI ?= no
-
-# Disable all features if CONFIG_NOTHING=yes is given unless CONFIG_EVERYTHING was also set
-ifeq ($(CONFIG_NOTHING), yes)
-  ifeq ($(CONFIG_EVERYTHING), yes)
-    $(error Setting CONFIG_NOTHING=yes and CONFIG_EVERYTHING=yes does not make sense)
-  endif
-  $(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
-    $(if $(filter yes, $($(var))),\
-      $(eval $(var)=no)))
-endif
-
-# Enable all features if CONFIG_EVERYTHING=yes is given
-ifeq ($(CONFIG_EVERYTHING), yes)
-$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
-	$(if $(filter no, $($(var))),\
-		$(eval $(var)=yes)))
-endif
-
-ifeq ($(CONFIG_ENABLE_LIBUSB1_PROGRAMMERS), no)
-override CONFIG_CH341A_SPI = no
-override CONFIG_DEDIPROG = no
-override CONFIG_DIGILENT_SPI = no
-override CONFIG_DEVELOPERBOX_SPI = no
-override CONFIG_PICKIT2_SPI = no
-override CONFIG_RAIDEN = no
-override CONFIG_STLINKV3_SPI = no
-override CONFIG_LSPCON_I2C_SPI = no
-override CONFIG_REALTEK_MST_I2C_SPI = no
-endif
-ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no)
-override CONFIG_INTERNAL = no
-override CONFIG_NIC3COM = no
-override CONFIG_GFXNVIDIA = no
-override CONFIG_SATASII = no
-override CONFIG_ATAHPT = no
-override CONFIG_ATAVIA = no
-override CONFIG_ATAPROMISE = no
-override CONFIG_ENE_LPC = no
-override CONFIG_IT8212 = no
-override CONFIG_DRKAISER = no
-override CONFIG_MEC1308 = no
-override CONFIG_NICREALTEK = no
-override CONFIG_NICNATSEMI = no
-override CONFIG_NICINTEL = no
-override CONFIG_NICINTEL_SPI = no
-override CONFIG_NICINTEL_EEPROM = no
-override CONFIG_OGP_SPI = no
-override CONFIG_SATAMV = no
-endif
-
-# Bitbanging SPI infrastructure, default off unless needed.
-ifeq ($(CONFIG_RAYER_SPI), yes)
-override CONFIG_BITBANG_SPI = yes
-else
-ifeq ($(CONFIG_PONY_SPI), yes)
-override CONFIG_BITBANG_SPI = yes
-else
-ifeq ($(CONFIG_INTERNAL), yes)
-override CONFIG_BITBANG_SPI = yes
-else
-ifeq ($(CONFIG_NICINTEL_SPI), yes)
-override CONFIG_BITBANG_SPI = yes
-else
-ifeq ($(CONFIG_OGP_SPI), yes)
-override CONFIG_BITBANG_SPI = yes
-else
-CONFIG_BITBANG_SPI ?= no
-endif
-endif
-endif
-endif
-endif
-
-###############################################################################
-# Handle CONFIG_* variables that depend on others set (and verified) above.
-
-# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled.
-ifeq ($(TARGET_OS), libpayload)
-ifeq ($(CONFIG_INTERNAL), yes)
-ifeq ($(CONFIG_INTERNAL_DMI), no)
-UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no
-else
-override CONFIG_INTERNAL_DMI = yes
-endif
-endif
-endif
-
-# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode.
-CONFIG_INTERNAL_DMI ?= yes
-
-###############################################################################
-# Programmer drivers and programmer support infrastructure.
-# Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below.
-
-FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER=$(CONFIG_DEFAULT_PROGRAMMER)'
-FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_ARGS="$(CONFIG_DEFAULT_PROGRAMMER_ARGS)"'
-
-ifeq ($(CONFIG_INTERNAL), yes)
-FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
-PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o
-ifeq ($(ARCH), x86)
-PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o
-PROGRAMMER_OBJS += ichspi.o dmi.o
-ifeq ($(CONFIG_INTERNAL_DMI), yes)
-FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1'
-endif
-else
-endif
-NEED_LIBPCI += CONFIG_INTERNAL
-endif
-
-ifeq ($(CONFIG_ENE_LPC), yes)
-FEATURE_CFLAGS += -D'CONFIG_ENE_LPC=1'
-PROGRAMMER_OBJS += ene_lpc.o
-NEED_RAW_ACCESS += CONFIG_ENE_LPC
-NEED_LIBPCI += CONFIG_ENE_LPC
-endif
-
-ifeq ($(CONFIG_MEC1308), yes)
-FEATURE_CFLAGS += -D'CONFIG_MEC1308=1'
-PROGRAMMER_OBJS += mec1308.o
-NEED_RAW_ACCESS += CONFIG_MEC1308
-NEED_LIBPCI += CONFIG_MEC1308
-endif
-
-ifeq ($(CONFIG_SERPROG), yes)
-FEATURE_CFLAGS += -D'CONFIG_SERPROG=1'
-PROGRAMMER_OBJS += serprog.o
-NEED_SERIAL += CONFIG_SERPROG
-NEED_POSIX_SOCKETS += CONFIG_SERPROG
-endif
-
-ifeq ($(CONFIG_RAYER_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1'
-PROGRAMMER_OBJS += rayer_spi.o
-NEED_RAW_ACCESS += CONFIG_RAYER_SPI
-endif
-
-ifeq ($(CONFIG_RAIDEN), yes)
-FEATURE_CFLAGS += -D'CONFIG_RAIDEN=1'
-PROGRAMMER_OBJS += raiden_debug_spi.o
-endif
-
-ifeq ($(CONFIG_PONY_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1'
-PROGRAMMER_OBJS += pony_spi.o
-NEED_SERIAL += CONFIG_PONY_SPI
-endif
-
-ifeq ($(CONFIG_BITBANG_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1'
-PROGRAMMER_OBJS += bitbang_spi.o
-endif
-
-ifeq ($(CONFIG_NIC3COM), yes)
-FEATURE_CFLAGS += -D'CONFIG_NIC3COM=1'
-PROGRAMMER_OBJS += nic3com.o
-NEED_LIBPCI += CONFIG_NIC3COM
-endif
-
-ifeq ($(CONFIG_GFXNVIDIA), yes)
-FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1'
-PROGRAMMER_OBJS += gfxnvidia.o
-NEED_LIBPCI += CONFIG_GFXNVIDIA
-endif
-
-ifeq ($(CONFIG_SATASII), yes)
-FEATURE_CFLAGS += -D'CONFIG_SATASII=1'
-PROGRAMMER_OBJS += satasii.o
-NEED_LIBPCI += CONFIG_SATASII
-endif
-
-ifeq ($(CONFIG_ATAHPT), yes)
-FEATURE_CFLAGS += -D'CONFIG_ATAHPT=1'
-PROGRAMMER_OBJS += atahpt.o
-NEED_LIBPCI += CONFIG_ATAHPT
-endif
-
-ifeq ($(CONFIG_ATAVIA), yes)
-FEATURE_CFLAGS += -D'CONFIG_ATAVIA=1'
-PROGRAMMER_OBJS += atavia.o
-NEED_LIBPCI += CONFIG_ATAVIA
-endif
-
-ifeq ($(CONFIG_ATAPROMISE), yes)
-FEATURE_CFLAGS += -D'CONFIG_ATAPROMISE=1'
-PROGRAMMER_OBJS += atapromise.o
-NEED_LIBPCI += CONFIG_ATAPROMISE
-endif
-
-ifeq ($(CONFIG_IT8212), yes)
-FEATURE_CFLAGS += -D'CONFIG_IT8212=1'
-PROGRAMMER_OBJS += it8212.o
-NEED_LIBPCI += CONFIG_IT8212
-endif
-
-ifeq ($(CONFIG_FT2232_SPI), yes)
-# This is a totally ugly hack.
-FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
-NEED_LIBFTDI += CONFIG_FT2232_SPI
-PROGRAMMER_OBJS += ft2232_spi.o
-endif
-
-ifeq ($(CONFIG_USBBLASTER_SPI), yes)
-# This is a totally ugly hack.
-FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'")
-NEED_LIBFTDI += CONFIG_USBBLASTER_SPI
-PROGRAMMER_OBJS += usbblaster_spi.o
-endif
-
-ifeq ($(CONFIG_PICKIT2_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_PICKIT2_SPI=1'
-PROGRAMMER_OBJS += pickit2_spi.o
-NEED_LIBUSB1 += CONFIG_PICKIT2_SPI
-endif
-
-ifeq ($(CONFIG_STLINKV3_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_STLINKV3_SPI=1'
-PROGRAMMER_OBJS += stlinkv3_spi.o
-NEED_LIBUSB1 += CONFIG_STLINKV3_SPI
-endif
-
-ifeq ($(CONFIG_LSPCON_I2C_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_LSPCON_I2C_SPI=1'
-PROGRAMMER_OBJS += lspcon_i2c_spi.o
-endif
-
-ifeq ($(CONFIG_REALTEK_MST_I2C_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_REALTEK_MST_I2C_SPI=1'
-PROGRAMMER_OBJS += realtek_mst_i2c_spi.o
-endif
-
-ifneq ($(NEED_LIBFTDI), )
-FTDILIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libftdi1 || $(PKG_CONFIG) --libs libftdi || printf "%s" "-lftdi -lusb")
-FEATURE_CFLAGS += $(call debug_shell,grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'")
-FTDI_INCLUDES := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --cflags-only-I libftdi1)
-FEATURE_CFLAGS += $(FTDI_INCLUDES)
-FEATURE_LIBS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
-# We can't set NEED_LIBUSB0 here because that would transform libftdi auto-enabling
-# into a hard requirement for libusb, defeating the purpose of auto-enabling.
-endif
-
-ifeq ($(CONFIG_DUMMY), yes)
-FEATURE_CFLAGS += -D'CONFIG_DUMMY=1'
-PROGRAMMER_OBJS += dummyflasher.o
-endif
-
-ifeq ($(CONFIG_DRKAISER), yes)
-FEATURE_CFLAGS += -D'CONFIG_DRKAISER=1'
-PROGRAMMER_OBJS += drkaiser.o
-NEED_LIBPCI += CONFIG_DRKAISER
-endif
-
-ifeq ($(CONFIG_NICREALTEK), yes)
-FEATURE_CFLAGS += -D'CONFIG_NICREALTEK=1'
-PROGRAMMER_OBJS += nicrealtek.o
-NEED_LIBPCI += CONFIG_NICREALTEK
-endif
-
-ifeq ($(CONFIG_NICNATSEMI), yes)
-FEATURE_CFLAGS += -D'CONFIG_NICNATSEMI=1'
-PROGRAMMER_OBJS += nicnatsemi.o
-NEED_LIBPCI += CONFIG_NICNATSEMI
-endif
-
-ifeq ($(CONFIG_NICINTEL), yes)
-FEATURE_CFLAGS += -D'CONFIG_NICINTEL=1'
-PROGRAMMER_OBJS += nicintel.o
-NEED_LIBPCI += CONFIG_NICINTEL
-endif
-
-ifeq ($(CONFIG_NICINTEL_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_NICINTEL_SPI=1'
-PROGRAMMER_OBJS += nicintel_spi.o
-NEED_LIBPCI += CONFIG_NICINTEL_SPI
-endif
-
-ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
-FEATURE_CFLAGS += -D'CONFIG_NICINTEL_EEPROM=1'
-PROGRAMMER_OBJS += nicintel_eeprom.o
-NEED_LIBPCI += CONFIG_NICINTEL_EEPROM
-endif
-
-ifeq ($(CONFIG_OGP_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_OGP_SPI=1'
-PROGRAMMER_OBJS += ogp_spi.o
-NEED_LIBPCI += CONFIG_OGP_SPI
-endif
-
-ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1'
-PROGRAMMER_OBJS += buspirate_spi.o
-NEED_SERIAL += CONFIG_BUSPIRATE_SPI
-endif
-
-ifeq ($(CONFIG_DEDIPROG), yes)
-FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
-PROGRAMMER_OBJS += dediprog.o
-NEED_LIBUSB1 += CONFIG_DEDIPROG
-endif
-
-ifeq ($(CONFIG_DEVELOPERBOX_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_DEVELOPERBOX_SPI=1'
-PROGRAMMER_OBJS += developerbox_spi.o
-NEED_LIBUSB1 += CONFIG_DEVELOPERBOX_SPI
-endif
-
-ifeq ($(CONFIG_SATAMV), yes)
-FEATURE_CFLAGS += -D'CONFIG_SATAMV=1'
-PROGRAMMER_OBJS += satamv.o
-NEED_LIBPCI += CONFIG_SATAMV
-endif
-
-ifeq ($(CONFIG_LINUX_MTD), yes)
-# This is a totally ugly hack.
-FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_MTD_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_MTD=1'")
-PROGRAMMER_OBJS += linux_mtd.o
-endif
-
-ifeq ($(CONFIG_LINUX_SPI), yes)
-# This is a totally ugly hack.
-FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_SPI_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_SPI=1'")
-PROGRAMMER_OBJS += linux_spi.o
-endif
-
-ifeq ($(CONFIG_MSTARDDC_SPI), yes)
-# This is a totally ugly hack.
-FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'")
-NEED_LINUX_I2C += CONFIG_MSTARDDC_SPI
-PROGRAMMER_OBJS += mstarddc_spi.o
-endif
-
-ifeq ($(CONFIG_CH341A_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_CH341A_SPI=1'
-PROGRAMMER_OBJS += ch341a_spi.o
-NEED_LIBUSB1 += CONFIG_CH341A_SPI
-endif
-
-ifeq ($(CONFIG_DIGILENT_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_DIGILENT_SPI=1'
-PROGRAMMER_OBJS += digilent_spi.o
-NEED_LIBUSB1 += CONFIG_DIGILENT_SPI
-endif
-
-ifeq ($(CONFIG_JLINK_SPI), yes)
-NEED_LIBJAYLINK += CONFIG_JLINK_SPI
-FEATURE_CFLAGS += -D'CONFIG_JLINK_SPI=1'
-PROGRAMMER_OBJS += jlink_spi.o
-endif
-
-ifeq ($(CONFIG_NI845X_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_NI845X_SPI=1'
-
-ifeq ($(CONFIG_NI845X_LIBRARY_PATH),)
-# if the user did not specified the NI-845x headers/lib path
-# do a guess for both 32 and 64 bit Windows versions
-NI845X_LIBS += -L'${PROGRAMFILES}\National Instruments\NI-845x\MS Visual C'
-NI845X_LIBS += -L'${PROGRAMFILES(x86)}\National Instruments\NI-845x\MS Visual C'
-NI845X_INCLUDES += -I'${PROGRAMFILES}\National Instruments\NI-845x\MS Visual C'
-NI845X_INCLUDES += -I'${PROGRAMFILES(x86)}\National Instruments\NI-845x\MS Visual C'
-else
-NI845X_LIBS += -L'$(CONFIG_NI845X_LIBRARY_PATH)'
-NI845X_INCLUDES += -I'$(CONFIG_NI845X_LIBRARY_PATH)'
-endif
-
-FEATURE_CFLAGS += $(NI845X_INCLUDES)
-LIBS += -lni845x
-PROGRAMMER_OBJS += ni845x_spi.o
-endif
-
-ifeq ($(CONFIG_LINUX_I2C_HELPER), yes)
-LIB_OBJS += i2c_helper_linux.o
-FEATURE_CFLAGS += -D'CONFIG_I2C_SUPPORT=1'
-endif
-
-ifneq ($(NEED_SERIAL), )
-LIB_OBJS += serial.o custom_baud.o
-endif
-
-ifneq ($(NEED_POSIX_SOCKETS), )
-ifeq ($(TARGET_OS), SunOS)
-LIBS += -lsocket -lnsl
-endif
-endif
-
-ifneq ($(NEED_LIBPCI), )
-CHECK_LIBPCI = yes
-# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually.
-# libpci may need raw memory, MSR or PCI port I/O on some platforms.
-# Individual drivers might have the same needs as well.
-NEED_RAW_ACCESS += $(NEED_LIBPCI)
-FEATURE_CFLAGS += -D'NEED_PCI=1'
-FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'")
-
-PROGRAMMER_OBJS += pcidev.o
-ifeq ($(TARGET_OS), NetBSD)
-# The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci.
-PCILIBS += -lpciutils -lpci
-else
-PCILIBS += -lpci
-endif
-endif
-
-ifneq ($(NEED_RAW_ACCESS), )
-# Raw memory, MSR or PCI port I/O access.
-FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1'
-PROGRAMMER_OBJS += physmap.o hwaccess.o
-
-ifeq ($(TARGET_OS), NetBSD)
-# For (i386|x86_64)_iopl(2).
-PCILIBS += -l$(shell uname -p)
-else
-ifeq ($(TARGET_OS), OpenBSD)
-# For (i386|amd64)_iopl(2).
-PCILIBS += -l$(shell uname -m)
-else
-ifeq ($(TARGET_OS), Darwin)
-# DirectHW framework can be found in the DirectHW library.
-PCILIBS += -framework IOKit -framework DirectHW
-endif
-endif
-endif
-
-endif
-
-
-ifneq ($(NEED_LIBUSB1), )
-CHECK_LIBUSB1 = yes
-FEATURE_CFLAGS += -D'NEED_LIBUSB1=1'
-PROGRAMMER_OBJS += usbdev.o usb_device.o
-# FreeBSD and DragonflyBSD use a reimplementation of libusb-1.0 that is simply called libusb
-ifeq ($(TARGET_OS),$(filter $(TARGET_OS),FreeBSD DragonFlyBSD))
-USB1LIBS += -lusb
-else
-ifeq ($(TARGET_OS),NetBSD)
-override CPPFLAGS += -I/usr/pkg/include/libusb-1.0
-USB1LIBS += -lusb-1.0
-else
-USB1LIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --libs libusb-1.0  || printf "%s" "-lusb-1.0")
-override CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --cflags-only-I libusb-1.0  || printf "%s" "-I/usr/include/libusb-1.0")
-endif
-endif
-endif
-
-ifneq ($(NEED_LIBJAYLINK), )
-CHECK_LIBJAYLINK = yes
-JAYLINKLIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --libs libjaylink)
-override CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --cflags-only-I libjaylink)
-endif
-
-ifeq ($(CONFIG_PRINT_WIKI), yes)
-FEATURE_CFLAGS += -D'CONFIG_PRINT_WIKI=1'
-CLI_OBJS += print_wiki.o
-endif
-
-FEATURE_CFLAGS += $(call debug_shell,grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'")
-
-# We could use PULLED_IN_LIBS, but that would be ugly.
-FEATURE_LIBS += $(call debug_shell,grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz")
-
-FEATURE_CFLAGS += $(call debug_shell,grep -q "CLOCK_GETTIME := yes" .features && printf "%s" "-D'HAVE_CLOCK_GETTIME=1'")
-FEATURE_LIBS += $(call debug_shell,grep -q "CLOCK_GETTIME := yes" .features && printf "%s" "-lrt")
-
-LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS)
-OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS)
-
-all: hwlibs features $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
-ifeq ($(ARCH), x86)
-	@+$(MAKE) -C util/ich_descriptors_tool/ TARGET_OS=$(TARGET_OS) EXEC_SUFFIX=$(EXEC_SUFFIX)
-endif
-
-$(PROGRAM)$(EXEC_SUFFIX): $(OBJS)
-	$(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(LIBS) $(PCILIBS) $(FEATURE_LIBS) $(USBLIBS) $(USB1LIBS) $(JAYLINKLIBS) $(NI845X_LIBS)
-
-libflashrom.a: $(LIBFLASHROM_OBJS)
-	$(AR) rcs $@ $^
-	$(RANLIB) $@
-
-# TAROPTIONS reduces information leakage from the packager's system.
-# If other tar programs support command line arguments for setting uid/gid of
-# stored files, they can be handled here as well.
-TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root")
-
-%.o: %.c .features
-	$(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SCMDEF) -o $@ -c $<
-
-# Make sure to add all names of generated binaries here.
-# This includes all frontends and libflashrom.
-# We don't use EXEC_SUFFIX here because we want to clean everything.
-clean:
-	rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE)
-	@+$(MAKE) -C util/ich_descriptors_tool/ clean
-
-distclean: clean
-	rm -f .features .libdeps
-
-strip: $(PROGRAM)$(EXEC_SUFFIX)
-	$(STRIP) $(STRIP_ARGS) $(PROGRAM)$(EXEC_SUFFIX)
-
-# to define test programs we use verbatim variables, which get exported
-# to environment variables and are referenced with $$<varname> later
-
-define COMPILER_TEST
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	return 0;
-}
-endef
-export COMPILER_TEST
-
-compiler: featuresavailable
-	@printf "Checking for a C compiler... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$COMPILER_TEST" > .test.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
-	@{ { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >&2 && \
-		echo "found." || { echo "not found."; \
-		rm -f .test.c .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@rm -f .test.c .test$(EXEC_SUFFIX)
-	@printf "Target arch is "
-	@# FreeBSD wc will output extraneous whitespace.
-	@echo $(ARCH)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' ||	\
-		( echo "unknown (\"$(ARCH)\"). Aborting."; exit 1)
-	@printf "%s\n" '$(ARCH)'
-	@printf "Target OS is "
-	@# FreeBSD wc will output extraneous whitespace.
-	@echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' ||	\
-		( echo "unknown (\"$(TARGET_OS)\"). Aborting."; exit 1)
-	@printf "%s\n" '$(TARGET_OS)'
-ifeq ($(TARGET_OS), libpayload)
-	@$(CC) --version 2>&1 | grep -q coreboot || \
-		( echo "Warning: It seems you are not using coreboot's reference compiler."; \
-		  echo "This might work but usually does not, please beware." )
-endif
-
-define LIBPCI_TEST
-/* Avoid a failing test due to libpci header symbol shadowing breakage */
-#define index shadow_workaround_index
-#if !defined __NetBSD__
-#include <pci/pci.h>
-#else
-#include <pciutils/pci.h>
-#endif
-struct pci_access *pacc;
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	pacc = pci_alloc();
-	return 0;
-}
-endef
-export LIBPCI_TEST
-
-define PCI_GET_DEV_TEST
-/* Avoid a failing test due to libpci header symbol shadowing breakage */
-#define index shadow_workaround_index
-#if !defined __NetBSD__
-#include <pci/pci.h>
-#else
-#include <pciutils/pci.h>
-#endif
-struct pci_access *pacc;
-struct pci_dev *dev = {0};
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	pacc = pci_alloc();
-	dev = pci_get_dev(pacc, dev->domain, dev->bus, dev->dev, 1);
-	return 0;
-}
-endef
-export PCI_GET_DEV_TEST
-
-define LIBUSB1_TEST
-#include <stddef.h>
-#include <libusb.h>
-int main(int argc, char **argv)
-{
-	(void)argc;
-	(void)argv;
-	libusb_init(NULL);
-	return 0;
-}
-endef
-export LIBUSB1_TEST
-
-define LIBJAYLINK_TEST
-#include <stddef.h>
-#include <libjaylink/libjaylink.h>
-int main(int argc, char **argv)
-{
-	struct jaylink_context *ctx;
-
-	(void)argc;
-	(void)argv;
-
-	jaylink_init(&ctx);
-	jaylink_exit(ctx);
-
-	return 0;
-}
-endef
-export LIBJAYLINK_TEST
-
-hwlibs: compiler
-	@printf "" > .libdeps
-ifeq ($(CHECK_LIBPCI), yes)
-	@printf "Checking for libpci headers... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$LIBPCI_TEST" > .test.c
-	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
-	@{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
-		echo "found." || { echo "not found."; echo;			\
-		echo "The following features require libpci: $(NEED_LIBPCI).";	\
-		echo "Please install libpci headers or disable all features"; \
-		echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \
-		echo "See README for more information."; echo;			\
-		rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$PCI_GET_DEV_TEST" > .test.c
-	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
-		( echo "new version (including PCI domain parameter)."; echo "OLD_PCI_GET_DEV := no" >> .libdeps ) ||	\
-		( echo "old version (without PCI domain parameter)."; echo "OLD_PCI_GET_DEV := yes" >> .libdeps ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-	@printf "Checking if libpci is present and sufficient... " | tee -a $(BUILD_DETAILS_FILE)
-	@printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS)" >>$(BUILD_DETAILS_FILE)
-	@{ { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) 2>>$(BUILD_DETAILS_FILE) >&2 && \
-		echo "yes." || { echo "no.";							\
-		printf "Checking if libz+libpci are present and sufficient..." ; \
-		{ printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz" >>$(BUILD_DETAILS_FILE) ; \
-		$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \
-		echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo;	\
-		echo "The following features require libpci: $(NEED_LIBPCI).";			\
-		echo "Please install libpci (package pciutils) and/or libz or disable all features"; \
-		echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \
-		echo "See README for more information."; echo;				\
-		rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@rm -f .test.c .test.o .test$(EXEC_SUFFIX)
-endif
-ifeq ($(CHECK_LIBUSB1), yes)
-	@printf "Checking for libusb-1.0 headers... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$LIBUSB1_TEST" > .test.c
-	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
-	@{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
-		echo "found." || { echo "not found."; echo;				\
-		echo "The following features require libusb-1.0: $(NEED_LIBUSB1).";	\
-		echo "Please install libusb-1.0 headers or disable all features"; \
-		echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \
-		echo "See README for more information."; echo;				\
-		rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@printf "Checking if libusb-1.0 is usable... " | tee -a $(BUILD_DETAILS_FILE)
-	@printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS)" >>$(BUILD_DETAILS_FILE)
-	@{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS) >&2 && \
-		echo "yes." || { echo "no.";						\
-		echo "The following features require libusb-1.0: $(NEED_LIBUSB1).";	\
-		echo "Please install libusb-1.0 or disable all features"; \
-		echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \
-		echo "See README for more information."; echo;				\
-		rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@rm -f .test.c .test.o .test$(EXEC_SUFFIX)
-endif
-ifeq ($(CHECK_LIBJAYLINK), yes)
-	@printf "Checking for libjaylink headers... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$LIBJAYLINK_TEST" > .test.c
-	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
-	@{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
-		echo "found." || { echo "not found."; echo;				\
-		echo "The following feature requires libjaylink: $(NEED_LIBJAYLINK).";	\
-		echo "Please install libjaylink headers or disable the feature"; \
-		echo "mentioned above by specifying make CONFIG_JLINK_SPI=no"; \
-		echo "See README for more information."; echo;				\
-		rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@printf "Checking if libjaylink is usable... " | tee -a $(BUILD_DETAILS_FILE)
-	@printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(JAYLINKLIBS)" >>$(BUILD_DETAILS_FILE)
-	@{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(JAYLINKLIBS) >&2 && \
-		echo "yes." || { echo "no.";						\
-		echo "The following feature requires libjaylink: $(NEED_LIBJAYLINK).";	\
-		echo "Please install libjaylink or disable the feature"; \
-		echo "mentioned above by specifying make CONFIG_JLINK_SPI=no"; \
-		echo "See README for more information."; echo;				\
-		rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-	@rm -f .test.c .test.o .test$(EXEC_SUFFIX)
-endif
-
-.features: features
-
-# If a user does not explicitly request a non-working feature, we should
-# silently disable it. However, if a non-working (does not compile) feature
-# is explicitly requested, we should bail out with a descriptive error message.
-# We also have to check that at least one programmer driver is enabled.
-featuresavailable:
-ifeq ($(PROGRAMMER_OBJS),)
-	@echo "You have to enable at least one programmer driver!"
-	@false
-endif
-ifneq ($(UNSUPPORTED_FEATURES), )
-	@echo "The following features are unavailable on your machine: $(UNSUPPORTED_FEATURES)"
-	@false
-endif
-
-define FTDI_TEST
-#include <stdlib.h>
-#include <ftdi.h>
-struct ftdi_context *ftdic = NULL;
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	return ftdi_init(ftdic);
-}
-endef
-export FTDI_TEST
-
-define FTDI_232H_TEST
-#include <ftdi.h>
-enum ftdi_chip_type type = TYPE_232H;
-endef
-export FTDI_232H_TEST
-
-define UTSNAME_TEST
-#include <sys/utsname.h>
-struct utsname osinfo;
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	uname (&osinfo);
-	return 0;
-}
-endef
-export UTSNAME_TEST
-
-define LINUX_MTD_TEST
-#include <mtd/mtd-user.h>
-
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	return 0;
-}
-endef
-export LINUX_MTD_TEST
-
-define LINUX_SPI_TEST
-#include <linux/types.h>
-#include <linux/spi/spidev.h>
-
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	return 0;
-}
-endef
-export LINUX_SPI_TEST
-
-define LINUX_I2C_TEST
-#include <linux/i2c-dev.h>
-#include <linux/i2c.h>
-
-int main(int argc, char **argv)
-{
-	(void) argc;
-	(void) argv;
-	return 0;
-}
-endef
-export LINUX_I2C_TEST
-
-define CLOCK_GETTIME_TEST
-#include <time.h>
-
-int main(int argc, char **argv)
-{
-	struct timespec res;
-	clock_gettime(CLOCK_REALTIME, &res);
-	return 0;
-}
-endef
-export CLOCK_GETTIME_TEST
-
-define NI845X_TEST
-#include <ni845x.h>
-
-int main(int argc, char **argv)
-{
-    (void) argc;
-    (void) argv;
-    char I2C_Device[256];
-    NiHandle Dev_Handle;
-    uInt32 NumberFound = 0;
-    ni845xFindDevice(I2C_Device, &Dev_Handle, &NumberFound);
-    ni845xCloseFindDeviceHandle(Dev_Handle);
-    return 0;
-}
-endef
-export NI845X_TEST
-
-features: compiler
-	@echo "FEATURES := yes" > .features.tmp
-ifneq ($(NEED_LIBFTDI), )
-	@printf "Checking for FTDI support... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$FTDI_TEST" > .featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
-	(	echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ; \
-		printf "Checking for FT232H support in libftdi... " ; \
-		echo "$$FTDI_232H_TEST" >> .featuretest.c ; \
-		printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE) ; \
-		{ $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
-			( echo "found."; echo "FT232H := yes" >> .features.tmp ) ||	\
-			( echo "not found."; echo "FT232H := no" >> .features.tmp ) } \
-	) || \
-	( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) } \
-	2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-endif
-ifeq ($(CONFIG_LINUX_MTD), yes)
-	@printf "Checking if Linux MTD headers are present... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$LINUX_MTD_TEST" > .featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
-		( echo "yes."; echo "LINUX_MTD_SUPPORT := yes" >> .features.tmp ) ||	\
-		( echo "no."; echo "LINUX_MTD_SUPPORT := no" >> .features.tmp ) } \
-		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-endif
-ifeq ($(CONFIG_LINUX_SPI), yes)
-	@printf "Checking if Linux SPI headers are present... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$LINUX_SPI_TEST" > .featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
-		( echo "yes."; echo "LINUX_SPI_SUPPORT := yes" >> .features.tmp ) ||	\
-		( echo "no."; echo "LINUX_SPI_SUPPORT := no" >> .features.tmp ) } \
-		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-endif
-ifneq ($(NEED_LINUX_I2C), )
-	@printf "Checking if Linux I2C headers are present... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$LINUX_I2C_TEST" > .featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
-		( echo "yes."; echo "LINUX_I2C_SUPPORT := yes" >> .features.tmp ) ||	\
-		( echo "no."; echo "LINUX_I2C_SUPPORT := no" >> .features.tmp ) } \
-		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-endif
-ifeq ($(CONFIG_NI845X_SPI), yes)
-	@printf "Checking for NI USB-845x installation... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$NI845X_TEST" > .featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(NI845X_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(NI845X_LIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE)
-
-	@ { { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(NI845X_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(NI845X_LIBS) $(LIBS) >&2 && \
-		( echo "yes."; echo "NI845X_SUPPORT := yes" >> .features.tmp ) ||	\
-		{   echo -e "\nUnable to find NI-845x headers or libraries."; \
-			echo "Please pass the NI-845x library path to the make with the CONFIG_NI845X_LIBRARY_PATH parameter,"; \
-			echo "or disable the NI-845x support by specifying make CONFIG_NI845X_SPI=no"; \
-			echo "For the NI-845x 17.0 the library path is:"; \
-			echo " On 32 bit systems: C:\Program Files)\National Instruments\NI-845x\MS Visual C"; \
-			echo " On 64 bit systems: C:\Program Files (x86)\National Instruments\NI-845x\MS Visual C"; \
-			exit 1; }; } \
-		2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
-endif
-	@printf "Checking for utsname support... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$UTSNAME_TEST" > .featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
-		( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) ||	\
-		( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-	@printf "Checking for clock_gettime support... " | tee -a $(BUILD_DETAILS_FILE)
-	@echo "$$CLOCK_GETTIME_TEST" >.featuretest.c
-	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -lrt .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
-	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -lrt .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
-		( echo "found."; echo "CLOCK_GETTIME := yes" >>.features.tmp ) || \
-		( echo "not found."; echo "CLOCK_GETTIME := no" >>.features.tmp ) } \
-		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
-	@$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features
-	@rm -f .featuretest.c .featuretest$(EXEC_SUFFIX)
-
-$(PROGRAM).8.html: $(PROGRAM).8
-	@groff -mandoc -Thtml $< >$@
-
-$(PROGRAM).8: $(PROGRAM).8.tmpl
-	@# Add the man page change date and version to the man page
-	@sed -e 's#.TH FLASHROM 8 .*#.TH FLASHROM 8 "$(MAN_DATE)" "$(VERSION)" "$(MAN_DATE)"#' <$< >$@
-
-install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
-	mkdir -p $(DESTDIR)$(PREFIX)/sbin
-	mkdir -p $(DESTDIR)$(MANDIR)/man8
-	$(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin
-	$(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8
-
-libinstall: libflashrom.a libflashrom.h
-	mkdir -p $(DESTDIR)$(PREFIX)/lib
-	$(INSTALL) -m 0644 libflashrom.a $(DESTDIR)$(PREFIX)/lib
-	mkdir -p $(DESTDIR)$(PREFIX)/include
-	$(INSTALL) -m 0644 libflashrom.h $(DESTDIR)$(PREFIX)/include
-
-_export: $(PROGRAM).8
-	@rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
-	@mkdir -p "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
-	@git archive HEAD | tar -x -C "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
-#	Generate versioninfo.inc containing metadata that would not be available in exported sources otherwise.
-	@echo "VERSION = $(VERSION)" > "$(EXPORTDIR)/flashrom-$(RELEASENAME)/versioninfo.inc"
-	@echo "MAN_DATE = $(MAN_DATE)" >> "$(EXPORTDIR)/flashrom-$(RELEASENAME)/versioninfo.inc"
-#	Restore modification date of all tracked files not marked 'export-ignore' in .gitattributes.
-#	sed is required to filter out file names having the attribute set.
-#	The sed program saves the file name in the hold buffer and then checks if the respective value is 'set'.
-#	If so it ignores the rest of the program, which otherwise restores the file name and prints it.
-	@git ls-tree -r -z -t --full-name --name-only HEAD | \
-		git check-attr -z --stdin export-ignore | \
-		sed -zne 'x;n;n;{/^set$$/b;};x;p;' | \
-		xargs -0 sh -c 'for f; do \
-			touch -d $$(git log --pretty=format:%cI -1 HEAD -- "$$f") \
-				"$(EXPORTDIR)/flashrom-$(RELEASENAME)/$$f"; \
-		done' dummy_arg0
-
-export: _export
-	@echo "Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/"
-
-tarball: _export
-	@tar -cj --format=ustar -f "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2" -C $(EXPORTDIR)/ \
-		$(TAROPTIONS) "flashrom-$(RELEASENAME)/"
-#	Delete the exported directory again because it is most likely what's expected by the user.
-	@rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
-	@echo Created "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2"
-
-libpayload: clean
-	make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib
-
-.PHONY: all install clean distclean compiler hwlibs features _export export tarball featuresavailable libpayload
-
-# Disable implicit suffixes and built-in rules (for performance and profit)
-.SUFFIXES:
-
--include $(OBJS:.o=.d)
+$(error flashrom uses meson for its build process. See mesonbuild.com)

To view, visit change 46875. To unsubscribe, or for help writing mail filters, visit settings.