DZ has uploaded this change for review.

View Change

flashchips: Add support for MXIC MX25R8035F

The MX25R8035F has been tested by ch341a programmer : read, write,
erase and wp.

We have tested --wp-enable, --wp-disable, --wp-list and --wp-range
commands for write-protect feature.

MX25R8035F datasheet is available at the following URL:
https://www.macronix.com/Lists/Datasheet/Attachments/8749/MX25R8035F,%20Wide%20Range,%208Mb,%20v1.6.pdf

Change-Id: Iec244ffc29278c1f8c3ae47d17af2c4fe5fbe498
Signed-off-by: DanielZhang <danielzhang@mxic.com.cn>
---
M flashchips.c
M include/flashchips.h
2 files changed, 48 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/37/81837/1
diff --git a/flashchips.c b/flashchips.c
index 7a40f07..e1e774c 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -10213,6 +10213,53 @@

{
.vendor = "Macronix",
+ .name = "MX25R8035F",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX25R8035F,
+ .total_size = 1024,
+ .page_size = 256,
+ /* OTP: 1024B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_CFGR,
+ .tested = TEST_OK_PREWB,
+ .probe = PROBE_SPI_RDID,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = SPI_BLOCK_ERASE_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 32} },
+ .block_erase = SPI_BLOCK_ERASE_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = SPI_BLOCK_ERASE_D8,
+ }, {
+ .eraseblocks = { {1 * 1024 * 1024, 1} },
+ .block_erase = SPI_BLOCK_ERASE_60,
+ }, {
+ .eraseblocks = { {1 * 1024 * 1024, 1} },
+ .block_erase = SPI_BLOCK_ERASE_C7,
+ }
+ },
+ .printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* bit 6 is quad enable */
+ .unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
+ .write = SPI_CHIP_WRITE256,
+ .read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {1650, 3600},
+ .reg_bits =
+ {
+ .srp = {STATUS1, 7, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}},
+ .tb = {CONFIG, 3, OTP}
+ },
+
+ .decode_range = DECODE_RANGE_SPI25,
+ },
+
+ {
+ .vendor = "Macronix",
.name = "MX25V4035F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index 103e6ea..c9303d5 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -540,6 +540,7 @@
#define MACRONIX_MX25R1635F 0x2815
#define MACRONIX_MX25R3235F 0x2816
#define MACRONIX_MX25R6435F 0x2817
+#define MACRONIX_MX25R8035F 0x2814

#define MACRONIX_MX29F001B 0x19
#define MACRONIX_MX29F001T 0x18

To view, visit change 81837. To unsubscribe, or for help writing mail filters, visit settings.

Gerrit-Project: flashrom
Gerrit-Branch: main
Gerrit-Change-Id: Iec244ffc29278c1f8c3ae47d17af2c4fe5fbe498
Gerrit-Change-Number: 81837
Gerrit-PatchSet: 1
Gerrit-Owner: DZ <danielzhang@mxic.com.cn>
Gerrit-MessageType: newchange