David Hendricks has uploaded this change for review.
dediprog: Use 4BA page program without 0x12
It's not clear exactly what the difference is between
WRITE_MODE_4B_ADDR_256B_PAGE_PGM with and without _0x12 from the SF600
command spec, but the former seems to work more reliably.
Tested using an SF600 (FW v7.2.21), IS25LP256D, W25Q256JV, and
MX25L25735.
Change-Id: I3cb37ec8838f5bb02948ed52b4a2906fa033cf83
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
---
M dediprog.c
1 file changed, 2 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/21/30521/1
diff --git a/dediprog.c b/dediprog.c
index 2a190d2..303f1d5 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -398,7 +398,8 @@
}
} else if (dedi_spi_cmd == WRITE_MODE_PAGE_PGM) {
if (flash->chip->feature_bits & FEATURE_4BA_WRITE) {
- data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12;
+// data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12;
+ data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM;
data_packet[4] = JEDEC_BYTE_PROGRAM_4BA;
use_4ba = true;
} else if (flash->in_4ba_mode) {
To view, visit change 30521. To unsubscribe, or for help writing mail filters, visit settings.