Patch Set 2:
Hi, Philipp mentioned that you had to tell flashrom that your device is
not a laptop? If that is still the case, can you provide a verbose log
please. I've reviewed the respective chipset_enable code against the ICL
datasheet but couldn't find any issue.
No, we first tried that before adding it as an target. Here is my logging:
mimoja@mimoja-Razer-Blade-Stealth-13-Late-2019:~/flashrom$ sudo ./flashrom -p internal -r icelake_readtest.bin
flashrom v1.1-rc1-126-g9a4f1d6 on Linux 5.3.0-24-generic (x86_64)
flashrom is free software, get the source code at https://flashrom.orgUsing clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
No DMI table found.
Found chipset "Intel Ice Lake U Premium".
Enabling flash write... SPI Configuration is locked down.
Enabling hardware sequencing because some important opcode is locked.
OK.
Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000.
Reading flash... done.
Also I renamed all occurences to "Ice Lake" now.
To view, visit change 37987. To unsubscribe, or for help writing mail filters, visit settings.