Nico Huber submitted this change.
serprog: Move content of programmer specific header to C file
Move the programmer specific code into serprog.c and remove its related
header file.
Change-Id: I5c65f43db200129489d487ff948daa08bd0e92fa
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/58300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
---
M serprog.c
D serprog.h
2 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/serprog.c b/serprog.c
index b207fd2..f142b49 100644
--- a/serprog.c
+++ b/serprog.c
@@ -38,7 +38,32 @@
#include "flash.h"
#include "programmer.h"
#include "chipdrivers.h"
-#include "serprog.h"
+
+/* According to Serial Flasher Protocol Specification - version 1 */
+#define S_ACK 0x06
+#define S_NAK 0x15
+#define S_CMD_NOP 0x00 /* No operation */
+#define S_CMD_Q_IFACE 0x01 /* Query interface version */
+#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */
+#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */
+#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */
+#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */
+#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */
+#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */
+#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */
+#define S_CMD_R_BYTE 0x09 /* Read a single byte */
+#define S_CMD_R_NBYTES 0x0A /* Read n bytes */
+#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */
+#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */
+#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */
+#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */
+#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */
+#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */
+#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */
+#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */
+#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */
+#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */
+#define S_CMD_S_PIN_STATE 0x15 /* Enable/disable output drivers */
#define MSGHEADER "serprog: "
diff --git a/serprog.h b/serprog.h
deleted file mode 100644
index b54aaea..0000000
--- a/serprog.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* According to Serial Flasher Protocol Specification - version 1 */
-#define S_ACK 0x06
-#define S_NAK 0x15
-#define S_CMD_NOP 0x00 /* No operation */
-#define S_CMD_Q_IFACE 0x01 /* Query interface version */
-#define S_CMD_Q_CMDMAP 0x02 /* Query supported commands bitmap */
-#define S_CMD_Q_PGMNAME 0x03 /* Query programmer name */
-#define S_CMD_Q_SERBUF 0x04 /* Query Serial Buffer Size */
-#define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */
-#define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */
-#define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */
-#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */
-#define S_CMD_R_BYTE 0x09 /* Read a single byte */
-#define S_CMD_R_NBYTES 0x0A /* Read n bytes */
-#define S_CMD_O_INIT 0x0B /* Initialize operation buffer */
-#define S_CMD_O_WRITEB 0x0C /* Write opbuf: Write byte with address */
-#define S_CMD_O_WRITEN 0x0D /* Write to opbuf: Write-N */
-#define S_CMD_O_DELAY 0x0E /* Write opbuf: udelay */
-#define S_CMD_O_EXEC 0x0F /* Execute operation buffer */
-#define S_CMD_SYNCNOP 0x10 /* Special no-operation that returns NAK+ACK */
-#define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */
-#define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */
-#define S_CMD_O_SPIOP 0x13 /* Perform SPI operation. */
-#define S_CMD_S_SPI_FREQ 0x14 /* Set SPI clock frequency */
-#define S_CMD_S_PIN_STATE 0x15 /* Enable/disable output drivers */
To view, visit change 58300. To unsubscribe, or for help writing mail filters, visit settings.