Attention is currently required from: Nico Huber, Angel Pons.

View Change

1 comment:

• Commit Message:

  • Patch Set #1, Line 9: FT232H-based devices are unable to read over 256 bytes of flash in one

    Is this documented anywhere? Or how did you figure this out?

    The other person I've seen report this issue was also using the same board, so it could be an issue with the chip. https://github.com/flashrom/flashrom/issues/237

    I got the board recently, and I believe it's a recent revision of the board. It's an FT232H board from Adafruit. It's also using the FT232HQ.

    As for SW, I'm running Arch Linux, with Linux 5.17, libftdi 1.5, and libusb 1.0.26.

    I also have another board with an FT2232HQ on it, I could test with that if that would be useful. If it works, that wouldn't really say much, but if it didn't work it might point to an issue in the libraries being more likely.

To view, visit change 63798. To unsubscribe, or for help writing mail filters, visit settings.