Anastasia Klimchuk has uploaded this change for review.
doc: Make OS specific instructions as headers so they are linkable
When html page is generated, all headers are generated as links on
the page. It is useful to have OS specific instructions as a link
to share with people.
Change-Id: I78645131b1f0acbedcf11964a204a24c45b62cff
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
---
M doc/dev_guide/building_from_source.rst
1 file changed, 120 insertions(+), 96 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/80/81780/1
diff --git a/doc/dev_guide/building_from_source.rst b/doc/dev_guide/building_from_source.rst
index c997832..a6d1dbf 100644
--- a/doc/dev_guide/building_from_source.rst
+++ b/doc/dev_guide/building_from_source.rst
@@ -47,141 +47,165 @@
* No external dependencies (documentation should be build without fetching all of pypi)
* No Javascript?
-* Linux
- * Debian / Ubuntu
- ::
+Linux
+"""""
- apt-get install -y \
- gcc meson ninja-build pkg-config python3-sphinx \
- libcmocka-dev libpci-dev libusb-1.0-0-dev libftdi1-dev libjaylink-dev
+* Debian / Ubuntu
- * ArchLinux / Manjaro
- ::
+ ::
- pacman -S --noconfirm \
- gcc meson ninja pkg-config python-sphinx cmocka \
- pciutils libusb libftdi libjaylink
+ apt-get install -y \
+ gcc meson ninja-build pkg-config python3-sphinx \
+ libcmocka-dev libpci-dev libusb-1.0-0-dev libftdi1-dev libjaylink-dev
- * openSUSE / SUSE
- ::
+* ArchLinux / Manjaro
- zypper install -y \
- gcc meson ninja pkg-config python3-Sphinx \
- libcmocka-devel pciutils-devel libusb-1_0-devel libftdi1-devel libjaylink-devel
+ ::
- * NixOS / nixpkgs
- * There is a ``shell.nix`` under ``scripts/``
+ pacman -S --noconfirm \
+ gcc meson ninja pkg-config python-sphinx cmocka \
+ pciutils libusb libftdi libjaylink
- ::
+* openSUSE / SUSE
- nix-shell -p \
- gcc meson ninja pkg-config sphinx \
- cmocka pciutils libusb1 libftdi1 libjaylink
+ ::
- * Alpine Linux
- ::
+ zypper install -y \
+ gcc meson ninja pkg-config python3-Sphinx \
+ libcmocka-devel pciutils-devel libusb-1_0-devel libftdi1-devel libjaylink-devel
- apk add \
- build-base meson ninja pkgconf py3-sphinx \
- cmocka-dev pciutils-dev libusb-dev libjaylink-dev
+* NixOS / nixpkgs
-* Windows
- * MSYS2
- Install `MSYS2 <https://www.msys2.org/>`_ and ensure it is `fully updated <https://www.msys2.org/docs/updating/>`_.
+ * There is a ``shell.nix`` under ``scripts/``
- * ``libpci`` is not available through the package manager and pci based programmer are not supported on Windows.
- * ``ni845x_spi`` is only available with the proprietary library from National Instruments. Download and install the driver
- from `ni.com <https://www.ni.com/en-us/support/downloads/drivers/download.ni-845x-driver-software.html>`_ and build flashrom
- for **32-bit**. Add ``-Dprogrammer=ni845x_spi`` to your meson configuration.
+ ::
- In the MINGW64 shell run::
+ nix-shell -p \
+ gcc meson ninja pkg-config sphinx \
+ cmocka pciutils libusb1 libftdi1 libjaylink
- pacman -Sy \
- mingw-w64-x86_64-gcc mingw-w64-x86_64-meson mingw-w64-x86_64-ninja mingw-w64-x86_64-pkg-config mingw-w64-x86_64-python-sphinx \
- mingw-w64-x86_64-cmocka mingw-w64-x86_64-libusb mingw-w64-x86_64-libftdi mingw-w64-x86_64-libjaylink-git
+* Alpine Linux
- For building flashrom as 32-bit application, use the MSYS2 MINGW32 shell and run::
+ ::
- pacman -Sy \
- mingw-w64-i686-gcc mingw-w64-i686-meson mingw-w64-i686-ninja mingw-w64-i686-pkg-config mingw-w64-i686-python-sphinx \
- mingw-w64-i686-cmocka mingw-w64-i686-libusb mingw-w64-i686-libftdi mingw-w64-i686-libjaylink-git
+ apk add \
+ build-base meson ninja pkgconf py3-sphinx \
+ cmocka-dev pciutils-dev libusb-dev libjaylink-dev
-* MacOS
- * Homebrew
- * ``libpci`` is not available through the package manager
- * ``libjaylink`` is not available through the package manager
+Windows
+"""""""
- ::
+* MSYS2
- brew install \
- meson ninja pkg-config sphinx-doc \
- libusb libftdi
+ Install `MSYS2 <https://www.msys2.org/>`_ and ensure it is `fully updated <https://www.msys2.org/docs/updating/>`_.
-* BSD
- * FreeBSD / DragonFlyBSD
- * ``libusb1`` is part of the system
- * ``libjaylink`` is not available through the package manager
+ * ``libpci`` is not available through the package manager and pci based programmer are not supported on Windows.
+ * ``ni845x_spi`` is only available with the proprietary library from National Instruments. Download and install the driver
+ from `ni.com <https://www.ni.com/en-us/support/downloads/drivers/download.ni-845x-driver-software.html>`_ and build flashrom
+ for **32-bit**. Add ``-Dprogrammer=ni845x_spi`` to your meson configuration.
- ::
+ In the MINGW64 shell run::
- pkg install \
- meson ninja pkgconf py39-sphinx \
- cmocka libpci libftdi1
+ pacman -Sy \
+ mingw-w64-x86_64-gcc mingw-w64-x86_64-meson mingw-w64-x86_64-ninja mingw-w64-x86_64-pkg-config mingw-w64-x86_64-python-sphinx \
+ mingw-w64-x86_64-cmocka mingw-w64-x86_64-libusb mingw-w64-x86_64-libftdi mingw-w64-x86_64-libjaylink-git
- * OpenBSD
- * ``libjaylink`` is not available through the package manager
+ For building flashrom as 32-bit application, use the MSYS2 MINGW32 shell and run::
- ::
+ pacman -Sy \
+ mingw-w64-i686-gcc mingw-w64-i686-meson mingw-w64-i686-ninja mingw-w64-i686-pkg-config mingw-w64-i686-python-sphinx \
+ mingw-w64-i686-cmocka mingw-w64-i686-libusb mingw-w64-i686-libftdi mingw-w64-i686-libjaylink-git
- pkg_add \
- meson ninja pkg-config py39-sphinx\
- cmocka pciutils libusb1 libftdi1
+MacOS
+"""""
- * NetBSD
- * ``libjaylink`` is not available through the package manager
- * note: https://www.cambus.net/installing-ca-certificates-on-netbsd/
+* Homebrew
- ::
+ * ``libpci`` is not available through the package manager
+ * ``libjaylink`` is not available through the package manager
- pkgin install \
- meson ninja pkg-config py39-sphinx \
- cmocka pciutils libusb1 libftdi1
+ ::
-* OpenIndiana (Illumos, Solaris, SunOS)
- * ``libpci`` missing, pciutils is build without it
- * ``libftdi1`` & ``libjaylink`` are not available through the package manager
- * TODO: replace ``build-essential`` with the default compiler
+ brew install \
+ meson ninja pkg-config sphinx-doc \
+ libusb libftdi
- ::
+BSD
+"""
- pkg install build-essential meson ninja cmocka libusb-1
+* FreeBSD / DragonFlyBSD
-* DJGPP-DOS
- * Get `DJGPP <https://www.delorie.com/djgpp/>`_
- * A great build script can be found `here <https://github.com/andrewwutw/build-djgpp>`_
- * Download the `pciutils <https://mj.ucw.cz/sw/pciutils/>`_ sources
+ * ``libusb1`` is part of the system
+ * ``libjaylink`` is not available through the package manager
- | Run the following commands in the the pciutils directory to build libpci for DOS.
- | Replace ``<DOS_INSTALL_ROOT>`` with your cross-compile install root.
+ ::
- ::
+ pkg install \
+ meson ninja pkgconf py39-sphinx \
+ cmocka libpci libftdi1
- make install-lib \
- ZLIB=no \
- DNS=no \
- HOST=i386-djgpp-djgpp \
- CROSS_COMPILE=i586-pc-msdosdjgpp- \
- STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" \
- PREFIX=<DOS_INSTALL_ROOT>
+* OpenBSD
- Point pkg-config to the ``<DOS_INSTALL_ROOT>`` ::
+ * ``libjaylink`` is not available through the package manager
- export PKG_CONFIG_SYSROOT=<DOS_INSTALL_ROOT>
+ ::
- * To compile flashrom use the ``meson_cross/i586_djgpp_dos.txt`` cross-file
- * You will need `CWSDPMI.EXE <https://sandmann.dotster.com/cwsdpmi/>`_ to run flashrom
+ pkg_add \
+ meson ninja pkg-config py39-sphinx\
+ cmocka pciutils libusb1 libftdi1
-* libpayload
+* NetBSD
+
+ * ``libjaylink`` is not available through the package manager
+ * note: https://www.cambus.net/installing-ca-certificates-on-netbsd/
+
+ ::
+
+ pkgin install \
+ meson ninja pkg-config py39-sphinx \
+ cmocka pciutils libusb1 libftdi1
+
+OpenIndiana (Illumos, Solaris, SunOS)
+"""""""""""""""""""""""""""""""""""""
+
+* ``libpci`` missing, pciutils is build without it
+* ``libftdi1`` & ``libjaylink`` are not available through the package manager
+* TODO: replace ``build-essential`` with the default compiler
+
+::
+
+ pkg install build-essential meson ninja cmocka libusb-1
+
+DJGPP-DOS
+"""""""""
+
+* Get `DJGPP <https://www.delorie.com/djgpp/>`_
+* A great build script can be found `here <https://github.com/andrewwutw/build-djgpp>`_
+* Download the `pciutils <https://mj.ucw.cz/sw/pciutils/>`_ sources
+
+| Run the following commands in the the pciutils directory to build libpci for DOS.
+| Replace ``<DOS_INSTALL_ROOT>`` with your cross-compile install root.
+
+::
+
+ make install-lib \
+ ZLIB=no \
+ DNS=no \
+ HOST=i386-djgpp-djgpp \
+ CROSS_COMPILE=i586-pc-msdosdjgpp- \
+ STRIP="--strip-program=i586-pc-msdosdjgpp-strip -s" \
+ PREFIX=<DOS_INSTALL_ROOT>
+
+Point pkg-config to the ``<DOS_INSTALL_ROOT>`` ::
+
+ export PKG_CONFIG_SYSROOT=<DOS_INSTALL_ROOT>
+
+* To compile flashrom use the ``meson_cross/i586_djgpp_dos.txt`` cross-file
+* You will need `CWSDPMI.EXE <https://sandmann.dotster.com/cwsdpmi/>`_ to run flashrom
+
+libpayload
+""""""""""
+
.. todo:: Add building instructions for libpayload
To view, visit change 81780. To unsubscribe, or for help writing mail filters, visit settings.