Edward O'Callaghan submitted this change.
pcidev: Move pci_card_find() from internal to canonical place
Also rename to `pcidev_card_find()` in fitting with pcidev.c helpers.
BUG=b:220950271
TEST=```sudo ./flashrom -p internal -r /tmp/bios
<snip>
Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000.
Reading flash... done.
```
Change-Id: I026bfbecba114411728d4ad1ed8969b469fa7d2d
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/59279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Nikolai Artemiev <nartemiev@google.com>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
---
M board_enable.c
M internal.c
M pcidev.c
M programmer.h
4 files changed, 27 insertions(+), 28 deletions(-)
diff --git a/board_enable.c b/board_enable.c
index 0ac522e..22db492 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -2645,17 +2645,17 @@
if (board->phase != phase)
continue;
- if (!pci_card_find(board->first_vendor, board->first_device,
- board->first_card_vendor,
- board->first_card_device))
+ if (!pcidev_card_find(board->first_vendor, board->first_device,
+ board->first_card_vendor,
+ board->first_card_device))
continue;
if (board->second_vendor) {
if (board->second_card_vendor) {
- if (!pci_card_find(board->second_vendor,
- board->second_device,
- board->second_card_vendor,
- board->second_card_device))
+ if (!pcidev_card_find(board->second_vendor,
+ board->second_device,
+ board->second_card_vendor,
+ board->second_card_device))
continue;
} else {
if (!pci_dev_find(board->second_vendor,
diff --git a/internal.c b/internal.c
index 7a326fc..cf9faf6 100644
--- a/internal.c
+++ b/internal.c
@@ -45,25 +45,6 @@
return pcidev_scandev(&filter, NULL);
}
-struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device,
- uint16_t card_vendor, uint16_t card_device)
-{
- struct pci_dev *temp = NULL;
- struct pci_filter filter;
-
- pci_filter_init(NULL, &filter);
- filter.vendor = vendor;
- filter.device = device;
-
- while ((temp = pcidev_scandev(&filter, temp))) {
- if ((card_vendor == pci_read_word(temp, PCI_SUBSYSTEM_VENDOR_ID))
- && (card_device == pci_read_word(temp, PCI_SUBSYSTEM_ID)))
- return temp;
- }
-
- return NULL;
-}
-
#if defined(__i386__) || defined(__x86_64__)
void probe_superio(void)
{
diff --git a/pcidev.c b/pcidev.c
index 8b8b478..0049f0c 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -157,6 +157,25 @@
return NULL;
}
+struct pci_dev *pcidev_card_find(uint16_t vendor, uint16_t device,
+ uint16_t card_vendor, uint16_t card_device)
+{
+ struct pci_dev *temp = NULL;
+ struct pci_filter filter;
+
+ pci_filter_init(NULL, &filter);
+ filter.vendor = vendor;
+ filter.device = device;
+
+ while ((temp = pcidev_scandev(&filter, temp))) {
+ if ((card_vendor == pci_read_word(temp, PCI_SUBSYSTEM_VENDOR_ID))
+ && (card_device == pci_read_word(temp, PCI_SUBSYSTEM_ID)))
+ return temp;
+ }
+
+ return NULL;
+}
+
struct pci_dev *pcidev_getdevfn(struct pci_dev *dev, const int func)
{
#if !defined(OLD_PCI_GET_DEV)
diff --git a/programmer.h b/programmer.h
index 6a0c3fa..50753cf 100644
--- a/programmer.h
+++ b/programmer.h
@@ -128,6 +128,7 @@
struct pci_dev *pcidev_scandev(struct pci_filter *filter, struct pci_dev *start);
struct pci_dev *pcidev_getdevfn(struct pci_dev *dev, const int func);
struct pci_dev *pcidev_find_vendorclass(uint16_t vendor, uint16_t devclass);
+struct pci_dev *pcidev_card_find(uint16_t vendor, uint16_t device, uint16_t card_vendor, uint16_t card_device);
/* rpci_write_* are reversible writes. The original PCI config space register
* contents will be restored on shutdown.
* To clone the pci_dev instances internally, the `pacc` global
@@ -262,8 +263,6 @@
#endif
#if NEED_PCI == 1
struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device);
-struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device,
- uint16_t card_vendor, uint16_t card_device);
#endif
#if CONFIG_INTERNAL == 1
extern int is_laptop;
To view, visit change 59279. To unsubscribe, or for help writing mail filters, visit settings.