Nico Huber merged this change.
pickit2_spi: Fix "dead" assignment
We never read the first 'ret'. Let's check the first 'ret'
and exit if it failed.
Also, print the version only when the command succeeded.
Found-by: scan-build 7.0.1-8
Change-Id: I4aac5e1f3bd0604b079e1fdd9b7f09f1f4fc2d7f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/34403
Tested-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
---
M pickit2_spi.c
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/pickit2_spi.c b/pickit2_spi.c
index 6d9b28f..52021d9 100644
--- a/pickit2_spi.c
+++ b/pickit2_spi.c
@@ -93,17 +93,23 @@
{
int ret;
uint8_t command[CMD_LENGTH] = {CMD_GET_VERSION, CMD_END_OF_BUFFER};
-
int transferred;
- ret = libusb_interrupt_transfer(pickit2_handle, ENDPOINT_OUT, command, CMD_LENGTH, &transferred, DFLT_TIMEOUT);
- ret = libusb_interrupt_transfer(pickit2_handle, ENDPOINT_IN, command, CMD_LENGTH, &transferred, DFLT_TIMEOUT);
- msg_pdbg("PICkit2 Firmware Version: %d.%d\n", (int)command[0], (int)command[1]);
+ ret = libusb_interrupt_transfer(pickit2_handle, ENDPOINT_OUT, command, CMD_LENGTH, &transferred, DFLT_TIMEOUT);
+
if (ret != 0) {
msg_perr("Command Get Firmware Version failed!\n");
return 1;
}
+ ret = libusb_interrupt_transfer(pickit2_handle, ENDPOINT_IN, command, CMD_LENGTH, &transferred, DFLT_TIMEOUT);
+
+ if (ret != 0) {
+ msg_perr("Command Get Firmware Version failed!\n");
+ return 1;
+ }
+
+ msg_pdbg("PICkit2 Firmware Version: %d.%d\n", (int)command[0], (int)command[1]);
return 0;
}
To view, visit change 34403. To unsubscribe, or for help writing mail filters, visit settings.