Anastasia Klimchuk submitted this change.
flashchips: Add support for MXIC MX25R2035F
The MX25R2035F has been tested by ch341a programmer : read, write,
erase and wp.
We have tested --wp-enable, --wp-disable, --wp-list and --wp-range
commands for write-protect feature.
MX25R2035F datasheet is available at the following URL:
https://www.macronix.com/Lists/Datasheet/Attachments/8696/MX25R2035F,%20Wide%20Range,%202Mb,%20v1.6.pdf
Change-Id: I00e76ef942976e3e102cf71fe695c6287b392b64
Signed-off-by: DanielZhang <danielzhang@mxic.com.cn>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/81839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
---
M flashchips.c
M include/flashchips.h
2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/flashchips.c b/flashchips.c
index 041ac40..13024de 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -10334,6 +10334,53 @@
{
.vendor = "Macronix",
+ .name = "MX25R2035F",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX25R2035F,
+ .total_size = 256,
+ .page_size = 256,
+ /* OTP: 1024B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_CFGR,
+ .tested = TEST_OK_PREWB,
+ .probe = PROBE_SPI_RDID,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 64} },
+ .block_erase = SPI_BLOCK_ERASE_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 8} },
+ .block_erase = SPI_BLOCK_ERASE_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 4} },
+ .block_erase = SPI_BLOCK_ERASE_D8,
+ }, {
+ .eraseblocks = { {1 * 256 * 1024, 1} },
+ .block_erase = SPI_BLOCK_ERASE_60,
+ }, {
+ .eraseblocks = { {1 * 256 * 1024, 1} },
+ .block_erase = SPI_BLOCK_ERASE_C7,
+ }
+ },
+ .printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* bit 6 is quad enable */
+ .unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
+ .write = SPI_CHIP_WRITE256,
+ .read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {1650, 3600},
+ .reg_bits =
+ {
+ .srp = {STATUS1, 7, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}},
+ .tb = {CONFIG, 3, OTP}
+ },
+
+ .decode_range = DECODE_RANGE_SPI25,
+ },
+
+ {
+ .vendor = "Macronix",
.name = "MX25R3235F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index 6008ad1..1e30e84 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -541,7 +541,8 @@
#define MACRONIX_MX25R1635F 0x2815
#define MACRONIX_MX25R3235F 0x2816
#define MACRONIX_MX25R6435F 0x2817
-#define MACRONIX_MX25R8035F 0x2814
+#define MACRONIX_MX25R2035F 0x2812
+#define MACRONIX_MX25R8035F 0x2814
#define MACRONIX_MX29F001B 0x19
#define MACRONIX_MX29F001T 0x18
To view, visit change 81839. To unsubscribe, or for help writing mail filters, visit settings.