View Change

2 comments:

• File flashchips.h:

  • Patch Set #2, Line 945:

    /*
     * W25Q128 has several variants. Currently all are 3.3V except for the W25Q128FW
     * which is 1.8V. Otherwise they should behave the same...
     */
    #define WINBOND_NEX_W25Q128_V	0x4018	/* W25Q128BV, W25Q128FV (SPI mode), W25Q128JV */
    #define WINBOND_NEX_W25Q256_V	0x4019	/* W25Q256FV or W25Q256JV_Q (QE=1) */
    #define WINBOND_NEX_W25Q512JV	0x4020	/* W25Q512JV */
    #define WINBOND_NEX_W25Q20_W	0x5012	/* W25Q20BW */
    #define WINBOND_NEX_W25Q40BW	0x5013	/* W25Q40BW */
    #define WINBOND_NEX_W25Q80BW	0x5014	/* W25Q80BW */
    #define WINBOND_NEX_W25Q40EW	0x6013	/* W25Q40EW */
    #define WINBOND_NEX_W25Q80EW	0x6014	/* W25Q80EW */
    #define WINBOND_NEX_W25Q16_W	0x6015	/* W25Q16DW */
    #define WINBOND_NEX_W25Q32_W	0x6016	/* W25Q32DW; W25Q32FV in QPI mode */
    #define WINBOND_NEX_W25Q64_W	0x6017	/* W25Q64DW; W25Q64FV in QPI mode */
    #define WINBOND_NEX_W25Q128_W	0x6018	/* Same as W25Q128FV (QPI mode), W25R128FV */
    #define WINBOND_NEX_W25Q128FW	0x6018	/* Same as W25Q128FV (QPI mode), W25R128FV */
    #define WINBOND_NEX_W25Q256_W	0x6019	/* W25Q256JW */
    #define WINBOND_NEX_W25Q128_V_M	0x7018	/* W25Q128JVSM */
    #define WINBOND_NEX_W25Q256JV_M	0x7019	/* W25Q256JV_M (QE=0) */
    #define WINBOND_NEX_W25Q32JW	0x8016
    

    ditto.

• File flashchips.c:

  • Patch Set #2, Line 17197:

    		.name		= "W25Q32JW",
    		.bustype	= BUS_SPI,
    		.manufacture_id	= WINBOND_NEX_ID,
    		.model_id	= WINBOND_NEX_W25Q32JW,
    		.total_size	= 4096,
    		.page_size	= 256,
    		.feature_bits	= FEATURE_WRSR_WREN,
    		.tested		= TEST_OK_PREW,
    		.probe		= probe_spi_rdid,
    		.probe_timing	= TIMING_ZERO,
    		.block_erasers	=
    		{
    			{
    				.eraseblocks = { {4 * 1024, 1024} },
    				.block_erase = spi_block_erase_20,
    			}, {
    				.eraseblocks = { {32 * 1024, 128} },
    				.block_erase = spi_block_erase_52,
    			}, {
    				.eraseblocks = { {64 * 1024, 64} },
    				.block_erase = spi_block_erase_d8,
    			}, {
    				.eraseblocks = { {4 * 1024 * 1024, 1} },
    				.block_erase = spi_block_erase_60,
    			}, {
    				.eraseblocks = { {4 * 1024 * 1024, 1} },
    				.block_erase = spi_block_erase_c7,
    			}
    		},
    		.unlock		= spi_disable_blockprotect,
    		.write		= spi_chip_write_256,
    		.read		= spi_chip_read,
    		.voltage	= {1700, 1950},
    	},
    
    	{
    		.vendor		= "Winbond",
    

    non-spansion related, separate out.

To view, visit change 46064. To unsubscribe, or for help writing mail filters, visit settings.