Anastasia Klimchuk has uploaded this change for review.
dediprog.c: Drop dediprog_ prefix for spi data struct members
The name of the struct type already contains dp_ prefix, so
prefix doesn't need to be repeated in members name.
BUG=b:185191942
TEST=builds and ninja test
Change-Id: I688d50926b78a6c3f1c5a8ba4ef88a0d5b495bd0
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
---
M dediprog.c
1 file changed, 56 insertions(+), 59 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/15/56415/1
diff --git a/dediprog.c b/dediprog.c
index b51f760..4097766 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -156,11 +156,11 @@
struct dediprog_data {
struct libusb_context *usb_ctx;
- libusb_device_handle *dediprog_handle;
- int dediprog_in_endpoint;
- int dediprog_out_endpoint;
- int dediprog_firmwareversion;
- enum dediprog_devtype dediprog_devicetype;
+ libusb_device_handle *handle;
+ int in_endpoint;
+ int out_endpoint;
+ int firmwareversion;
+ enum dediprog_devtype devicetype;
};
#if defined(LIBUSB_MAJOR) && defined(LIBUSB_MINOR) && defined(LIBUSB_MICRO) && \
@@ -182,17 +182,17 @@
static enum protocol protocol(const struct dediprog_data *dp_data)
{
/* Firmware version < 5.0.0 is handled explicitly in some cases. */
- switch (dp_data->dediprog_devicetype) {
+ switch (dp_data->devicetype) {
case DEV_SF100:
case DEV_SF200:
- if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 5, 0))
+ if (dp_data->firmwareversion < FIRMWARE_VERSION(5, 5, 0))
return PROTOCOL_V1;
else
return PROTOCOL_V2;
case DEV_SF600:
- if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(6, 9, 0))
+ if (dp_data->firmwareversion < FIRMWARE_VERSION(6, 9, 0))
return PROTOCOL_V1;
- else if (dp_data->dediprog_firmwareversion <= FIRMWARE_VERSION(7, 2, 21))
+ else if (dp_data->firmwareversion <= FIRMWARE_VERSION(7, 2, 21))
return PROTOCOL_V2;
else
return PROTOCOL_V3;
@@ -276,16 +276,16 @@
int target_leds, ret;
if (protocol(dp_data) >= PROTOCOL_V2) {
target_leds = (leds ^ 7) << 8;
- ret = dediprog_write(CMD_SET_IO_LED, target_leds, 0, NULL, 0, dp_data->dediprog_handle);
+ ret = dediprog_write(CMD_SET_IO_LED, target_leds, 0, NULL, 0, dp_data->handle);
} else {
- if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
+ if (dp_data->firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
target_leds = ((leds & LED_ERROR) >> 2) | ((leds & LED_PASS) << 2);
} else {
target_leds = leds;
}
target_leds ^= 7;
- ret = dediprog_write(CMD_SET_IO_LED, 0x9, target_leds, NULL, 0, dp_data->dediprog_handle);
+ ret = dediprog_write(CMD_SET_IO_LED, 0x9, target_leds, NULL, 0, dp_data->handle);
}
if (ret != 0x0) {
@@ -358,7 +358,7 @@
static int dediprog_set_spi_speed(unsigned int spispeed_idx, const struct dediprog_data *dp_data)
{
- if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
+ if (dp_data->firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
msg_pwarn("Skipping to set SPI speed because firmware is too old.\n");
return 0;
}
@@ -366,7 +366,7 @@
const struct dediprog_spispeeds *spispeed = &spispeeds[spispeed_idx];
msg_pdbg("SPI speed is %sHz\n", spispeed->name);
- int ret = dediprog_write(CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0, dp_data->dediprog_handle);
+ int ret = dediprog_write(CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0, dp_data->handle);
if (ret != 0x0) {
msg_perr("Command Set SPI Speed 0x%x failed!\n", spispeed->speed);
return 1;
@@ -491,7 +491,7 @@
return 1;
int ret = dediprog_write(CMD_READ, value, idx, data_packet, sizeof(data_packet),
- dp_data->dediprog_handle);
+ dp_data->handle);
if (ret != (int)sizeof(data_packet)) {
msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, libusb_error_name(ret));
return 1;
@@ -520,7 +520,7 @@
{
transfer = transfers[status.queued_idx % DEDIPROG_ASYNC_TRANSFERS];
libusb_fill_bulk_transfer(transfer,
- dp_data->dediprog_handle, 0x80 | dp_data->dediprog_in_endpoint,
+ dp_data->handle, 0x80 | dp_data->in_endpoint,
(unsigned char *)buf + status.queued_idx * chunksize, chunksize,
dediprog_bulk_read_cb, &status, DEFAULT_TIMEOUT);
transfer->flags |= LIBUSB_TRANSFER_SHORT_NOT_OK;
@@ -650,8 +650,7 @@
unsigned int value, idx;
if (prepare_rw_cmd(flash, data_packet, count, dedi_spi_cmd, &value, &idx, start, 0))
return 1;
- int ret = dediprog_write(CMD_WRITE, value, idx, data_packet, sizeof(data_packet),
- dp_data->dediprog_handle);
+ int ret = dediprog_write(CMD_WRITE, value, idx, data_packet, sizeof(data_packet), dp_data->handle);
if (ret != (int)sizeof(data_packet)) {
msg_perr("Command Write SPI Bulk failed, %s!\n", libusb_error_name(ret));
return 1;
@@ -663,9 +662,8 @@
memcpy(usbbuf, buf + i * chunksize, chunksize);
memset(usbbuf + chunksize, 0xff, sizeof(usbbuf) - chunksize); // fill up with 0xFF
int transferred;
- ret = libusb_bulk_transfer(dp_data->dediprog_handle,
- dp_data->dediprog_out_endpoint,
- usbbuf, 512, &transferred, DEFAULT_TIMEOUT);
+ ret = libusb_bulk_transfer(dp_data->handle, dp_data->out_endpoint, usbbuf, 512, &transferred,
+ DEFAULT_TIMEOUT);
if ((ret < 0) || (transferred != 512)) {
msg_perr("SPI bulk write failed, expected %i, got %s!\n", 512, libusb_error_name(ret));
return 1;
@@ -767,7 +765,7 @@
idx = readcnt ? 0x1 : 0x0; // Indicate if we require a read
value = 0;
}
- ret = dediprog_write(CMD_TRANSCEIVE, value, idx, writearr, writecnt, dp_data->dediprog_handle);
+ ret = dediprog_write(CMD_TRANSCEIVE, value, idx, writearr, writecnt, dp_data->handle);
if (ret != (int)writecnt) {
msg_perr("Send SPI failed, expected %i, got %i %s!\n",
writecnt, ret, libusb_error_name(ret));
@@ -794,7 +792,7 @@
}
ret = dediprog_read(CMD_TRANSCEIVE, value, idx, readarr, readcnt);
*/
- ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt, dp_data->dediprog_handle);
+ ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt, dp_data->handle);
if (ret != (int)readcnt) {
msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret));
return 1;
@@ -808,7 +806,7 @@
char buf[0x11];
/* Command Receive Device String. */
- ret = dediprog_read(CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10, dp_data->dediprog_handle);
+ ret = dediprog_read(CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10, dp_data->handle);
if (ret != 0x10) {
msg_perr("Incomplete/failed Command Receive Device String!\n");
return 1;
@@ -816,11 +814,11 @@
buf[0x10] = '\0';
msg_pdbg("Found a %s\n", buf);
if (memcmp(buf, "SF100", 0x5) == 0)
- dp_data->dediprog_devicetype = DEV_SF100;
+ dp_data->devicetype = DEV_SF100;
else if (memcmp(buf, "SF200", 0x5) == 0)
- dp_data->dediprog_devicetype = DEV_SF200;
+ dp_data->devicetype = DEV_SF200;
else if (memcmp(buf, "SF600", 0x5) == 0)
- dp_data->dediprog_devicetype = DEV_SF600;
+ dp_data->devicetype = DEV_SF600;
else {
msg_perr("Device not a SF100, SF200, or SF600!\n");
return 1;
@@ -829,7 +827,7 @@
int sfnum;
int fw[3];
if (sscanf(buf, "SF%d V:%d.%d.%d ", &sfnum, &fw[0], &fw[1], &fw[2]) != 4 ||
- sfnum != (int)dp_data->dediprog_devicetype) {
+ sfnum != (int)dp_data->devicetype) {
msg_perr("Unexpected firmware version string '%s'\n", buf);
return 1;
}
@@ -839,7 +837,7 @@
return 1;
}
- dp_data->dediprog_firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]);
+ dp_data->firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]);
if (protocol(dp_data) == PROTOCOL_UNKNOWN) {
msg_perr("Internal error: Unable to determine protocol version.\n");
return 1;
@@ -905,12 +903,11 @@
{
int ret;
- if (dp_data->dediprog_devicetype != DEV_SF600)
+ if (dp_data->devicetype != DEV_SF600)
return 0;
msg_pdbg2("Disabling standalone mode.\n");
- ret = dediprog_write(CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0,
- dp_data->dediprog_handle);
+ ret = dediprog_write(CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0, dp_data->handle);
if (ret) {
msg_perr("Failed to disable standalone mode: %s\n", libusb_error_name(ret));
return 1;
@@ -1040,25 +1037,25 @@
const uint16_t pid = devs_dediprog[0].device_id;
int ret;
- dp_data->dediprog_handle = usb_dev_get_by_vid_pid_number(dp_data->usb_ctx,
+ dp_data->handle = usb_dev_get_by_vid_pid_number(dp_data->usb_ctx,
vid, pid, (unsigned int) index);
- if (!dp_data->dediprog_handle) {
+ if (!dp_data->handle) {
msg_perr("Could not find a Dediprog programmer on USB.\n");
libusb_exit(dp_data->usb_ctx);
return -1;
}
- ret = libusb_set_configuration(dp_data->dediprog_handle, 1);
+ ret = libusb_set_configuration(dp_data->handle, 1);
if (ret != 0) {
msg_perr("Could not set USB device configuration: %i %s\n",
ret, libusb_error_name(ret));
- libusb_close(dp_data->dediprog_handle);
+ libusb_close(dp_data->handle);
return -2;
}
- ret = libusb_claim_interface(dp_data->dediprog_handle, 0);
+ ret = libusb_claim_interface(dp_data->handle, 0);
if (ret < 0) {
msg_perr("Could not claim USB device interface %i: %i %s\n",
0, ret, libusb_error_name(ret));
- libusb_close(dp_data->dediprog_handle);
+ libusb_close(dp_data->handle);
return -2;
}
return 0;
@@ -1068,20 +1065,20 @@
{
int ret = 0;
struct dediprog_data *dp_data = data;
- dp_data->dediprog_devicetype = DEV_UNKNOWN;
+ dp_data->devicetype = DEV_UNKNOWN;
/* URB 28. Command Set SPI Voltage to 0. */
- if (dediprog_set_spi_voltage(0x0, dp_data->dediprog_handle)) {
+ if (dediprog_set_spi_voltage(0x0, dp_data->handle)) {
ret = 1;
goto out;
}
- if (libusb_release_interface(dp_data->dediprog_handle, 0)) {
+ if (libusb_release_interface(dp_data->handle, 0)) {
msg_perr("Could not release USB interface!\n");
ret = 1;
goto out;
}
- libusb_close(dp_data->dediprog_handle);
+ libusb_close(dp_data->handle);
libusb_exit(dp_data->usb_ctx);
out:
free(data);
@@ -1214,8 +1211,8 @@
msg_perr("Unable to allocate space for SPI master data\n");
return 1;
}
- dp_data->dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0);
- dp_data->dediprog_devicetype = DEV_UNKNOWN;
+ dp_data->firmwareversion = FIRMWARE_VERSION(0, 0, 0);
+ dp_data->devicetype = DEV_UNKNOWN;
/* Here comes the USB stuff. */
libusb_init(&dp_data->usb_ctx);
@@ -1242,17 +1239,17 @@
* device is in use by another instance of flashrom),
* the device is skipped and the next device is tried.
*/
- found_id = dediprog_read_id(dp_data->dediprog_handle);
+ found_id = dediprog_read_id(dp_data->handle);
if (found_id < 0) {
msg_perr("Could not read id.\n");
- libusb_release_interface(dp_data->dediprog_handle, 0);
- libusb_close(dp_data->dediprog_handle);
+ libusb_release_interface(dp_data->handle, 0);
+ libusb_close(dp_data->handle);
continue;
}
msg_pinfo("Found dediprog id SF%06d.\n", found_id);
if (found_id != id) {
- libusb_release_interface(dp_data->dediprog_handle, 0);
- libusb_close(dp_data->dediprog_handle);
+ libusb_release_interface(dp_data->handle, 0);
+ libusb_close(dp_data->handle);
continue;
}
break;
@@ -1261,7 +1258,7 @@
if (dediprog_open(usedevice, dp_data)) {
return 1;
}
- found_id = dediprog_read_id(dp_data->dediprog_handle);
+ found_id = dediprog_read_id(dp_data->handle);
}
if (found_id >= 0) {
@@ -1271,21 +1268,21 @@
/* Try reading the devicestring. If that fails and the device is old (FW < 6.0.0, which we can not know)
* then we need to try the "set voltage" command and then attempt to read the devicestring again. */
if (dediprog_check_devicestring(dp_data)) {
- if (dediprog_set_voltage(dp_data->dediprog_handle))
+ if (dediprog_set_voltage(dp_data->handle))
goto init_err_cleanup_exit;
if (dediprog_check_devicestring(dp_data))
goto init_err_cleanup_exit;
}
/* SF100/SF200 uses one in/out endpoint, SF600 uses separate in/out endpoints */
- dp_data->dediprog_in_endpoint = 2;
- switch (dp_data->dediprog_devicetype) {
+ dp_data->in_endpoint = 2;
+ switch (dp_data->devicetype) {
case DEV_SF100:
case DEV_SF200:
- dp_data->dediprog_out_endpoint = 2;
+ dp_data->out_endpoint = 2;
break;
default:
- dp_data->dediprog_out_endpoint = 1;
+ dp_data->out_endpoint = 1;
break;
}
@@ -1295,9 +1292,9 @@
dediprog_set_leds(LED_ALL, dp_data);
/* Select target/socket, frequency and VCC. */
- if (set_target_flash(target, dp_data->dediprog_handle) ||
+ if (set_target_flash(target, dp_data->handle) ||
dediprog_set_spi_speed(spispeed_idx, dp_data) ||
- dediprog_set_spi_voltage(millivolt, dp_data->dediprog_handle)) {
+ dediprog_set_spi_voltage(millivolt, dp_data->handle)) {
dediprog_set_leds(LED_ERROR, dp_data);
goto init_err_cleanup_exit;
}
@@ -1305,8 +1302,8 @@
if (dediprog_standalone_mode(dp_data))
goto init_err_cleanup_exit;
- if ((dp_data->dediprog_devicetype == DEV_SF100) ||
- (dp_data->dediprog_devicetype == DEV_SF600 && protocol(dp_data) == PROTOCOL_V3))
+ if ((dp_data->devicetype == DEV_SF100) ||
+ (dp_data->devicetype == DEV_SF600 && protocol(dp_data) == PROTOCOL_V3))
spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES;
if (protocol(dp_data) >= PROTOCOL_V2)
To view, visit change 56415. To unsubscribe, or for help writing mail filters, visit settings.