Felix Singer submitted this change.
dirtyjtag: Add DirtyJTAG programmer
Add a new programmer driver for the DirtyJTAG project (a USB-JTAG
firmware for STM32 MCUs).
Successfully tested with DirtyJTAG 1.4 running on an Olimex STM32-H103
development board and a SST25VF020B SPI flash chip.
Change-Id: Ic43e9a014ed7d04e429e73b30c9dcfdde1a78913
Signed-off-by: Jean THOMAS <virgule@jeanthomas.me>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67878
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
---
M Makefile
A dirtyjtag_spi.c
M flashrom.8.tmpl
M include/programmer.h
M meson.build
M meson_options.txt
M programmer_table.c
M test_build.sh
8 files changed, 384 insertions(+), 5 deletions(-)
diff --git a/Makefile b/Makefile
index f92cefd..a8df91f 100644
--- a/Makefile
+++ b/Makefile
@@ -161,6 +161,7 @@
CONFIG_PICKIT2_SPI \
CONFIG_RAIDEN_DEBUG_SPI \
CONFIG_STLINKV3_SPI \
+ CONFIG_DIRTYJTAG_SPI \
DEPENDS_ON_LIBFTDI1 := \
CONFIG_FT2232_SPI \
@@ -521,6 +522,9 @@
# Digilent Development board JTAG
CONFIG_DIGILENT_SPI ?= yes
+# DirtyJTAG
+CONFIG_DIRTYJTAG_SPI ?= yes
+
# Disable J-Link for now.
CONFIG_JLINK_SPI ?= no
@@ -771,6 +775,11 @@
PROGRAMMER_OBJS += digilent_spi.o
endif
+ifeq ($(CONFIG_DIRTYJTAG_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_DIRTYJTAG_SPI=1'
+PROGRAMMER_OBJS += dirtyjtag_spi.o
+endif
+
ifeq ($(CONFIG_JLINK_SPI), yes)
FEATURE_FLAGS += -D'CONFIG_JLINK_SPI=1'
PROGRAMMER_OBJS += jlink_spi.o
diff --git a/dirtyjtag_spi.c b/dirtyjtag_spi.c
new file mode 100644
index 0000000..42169ed
--- /dev/null
+++ b/dirtyjtag_spi.c
@@ -0,0 +1,320 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2021-2022 Jean THOMAS <virgule@jeanthomas.me>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Driver for the DirtyJTAG project.
+ * See https://github.com/jeanthom/dirtyjtag for more info.
+ *
+ * SPI-JTAG Pin Mapping
+ * |=========|==========|
+ * | SPI pin | JTAG pin |
+ * |=========|==========|
+ * | #CS | TMS |
+ * | #WP | SRST |
+ * | #HOLD | TRST |
+ * | MISO | TDO |
+ * | MOSI | TDI |
+ * | CLK | TCK |
+ * |=========|==========|
+ */
+
+#include <assert.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <libusb.h>
+#include "programmer.h"
+
+struct dirtyjtag_spi_data {
+ struct libusb_context *libusb_ctx;
+ struct libusb_device_handle *libusb_handle;
+};
+
+static const struct dev_entry devs_dirtyjtag_spi[] = {
+ { 0x1209, 0xc0ca, OK, "DirtyJTAG", "JTAG probe" },
+ { 0 },
+};
+
+static const char dirtyjtag_write_endpoint = 0x01;
+static const char dirtyjtag_read_endpoint = 0x82;
+static const int dirtyjtag_timeout = 100 * 10; /* 100 ms */
+
+enum dirtyjtag_command_identifier {
+ CMD_STOP = 0x00,
+ CMD_INFO = 0x01,
+ CMD_FREQ = 0x02,
+ CMD_XFER = 0x03,
+ CMD_SETSIG = 0x04,
+ CMD_GETSIG = 0x05,
+ CMD_CLK = 0x06
+};
+
+enum dirtyjtag_signal_identifier {
+ SIG_TCK = 1 << 1,
+ SIG_TDI = 1 << 2,
+ SIG_TDO = 1 << 3,
+ SIG_TMS = 1 << 4,
+ SIG_TRST = 1 << 5,
+ SIG_SRST = 1 << 6
+};
+
+static int dirtyjtag_send(struct dirtyjtag_spi_data *djtag_data, uint8_t *data, size_t len)
+{
+ int transferred;
+ int ret = libusb_bulk_transfer(djtag_data->libusb_handle,
+ dirtyjtag_write_endpoint,
+ data,
+ len,
+ &transferred,
+ dirtyjtag_timeout);
+ if (ret != 0) {
+ msg_perr("%s: failed to send query command\n", __func__);
+ return -1;
+ }
+ if (transferred != (int)len) {
+ msg_perr("%s: failed to send whole packet\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int dirtyjtag_receive(struct dirtyjtag_spi_data *djtag_data, uint8_t *data, size_t buffer_len, int expected)
+{
+ int transferred;
+ int ret = libusb_bulk_transfer(djtag_data->libusb_handle,
+ dirtyjtag_read_endpoint,
+ data,
+ buffer_len,
+ &transferred,
+ dirtyjtag_timeout);
+ if (ret != 0) {
+ msg_perr("%s: Failed to read SPI commands\n", __func__);
+ return -1;
+ }
+
+ if (expected != -1 && transferred != expected) {
+ msg_perr("%s: failed to meet expected\n", __func__);
+ return -1;
+ }
+
+ return transferred;
+}
+
+static int dirtyjtag_spi_shutdown(void *data)
+{
+ struct dirtyjtag_spi_data *djtag_data = (struct dirtyjtag_spi_data*)data;
+ libusb_release_interface(djtag_data->libusb_handle, 0);
+ libusb_attach_kernel_driver(djtag_data->libusb_handle, 0);
+ libusb_close(djtag_data->libusb_handle);
+ libusb_exit(djtag_data->libusb_ctx);
+ free(data);
+ return 0;
+}
+
+static int dirtyjtag_djtag1_spi_send_command(struct dirtyjtag_spi_data *context,
+ unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr)
+{
+ const size_t max_xfer_size = 30; // max transfer size in DJTAG1
+ size_t len = writecnt + readcnt;
+ size_t num_xfer = (len + max_xfer_size - 1 ) / max_xfer_size; // ceil(len/max_xfer_size)
+
+ uint8_t *rxtx_buffer = malloc(max_xfer_size * num_xfer);
+ if (!rxtx_buffer) {
+ msg_perr("%s: Failed rxtx_buffer allocation\n", __func__);
+ return -1;
+ }
+
+ memcpy(rxtx_buffer, writearr, writecnt);
+ for (size_t i = 0; i < num_xfer; i++) {
+ const size_t xfer_offset = i * max_xfer_size;
+ size_t txn_size = max_xfer_size;
+ if (i == num_xfer-1 && len % max_xfer_size != 0)
+ txn_size = len % max_xfer_size;
+
+ uint8_t transfer_buffer[32] = {
+ CMD_XFER,
+ txn_size * 8
+ };
+ memcpy(transfer_buffer + 2, rxtx_buffer + xfer_offset, txn_size);
+
+ if (dirtyjtag_send(context, transfer_buffer, sizeof(transfer_buffer)))
+ goto cleanup_fail;
+
+ if (dirtyjtag_receive(context, transfer_buffer, sizeof(transfer_buffer), 32) < 0)
+ goto cleanup_fail;
+
+ memcpy(rxtx_buffer + xfer_offset, transfer_buffer, txn_size);
+ }
+ memcpy(readarr, rxtx_buffer + writecnt, readcnt);
+
+ free(rxtx_buffer);
+
+ uint8_t tms_reset_buffer[] = {
+ CMD_SETSIG,
+ SIG_TMS,
+ SIG_TMS,
+
+ CMD_STOP,
+ };
+ dirtyjtag_send(context, tms_reset_buffer, sizeof(tms_reset_buffer));
+
+ return 0;
+
+cleanup_fail:
+ free(rxtx_buffer);
+ return -1;
+}
+
+static int dirtyjtag_spi_spi_send_command(const struct flashctx *flash,
+ unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr)
+{
+ struct dirtyjtag_spi_data *djtag_data = flash->mst->spi.data;
+ return dirtyjtag_djtag1_spi_send_command(djtag_data, writecnt, readcnt, writearr, readarr);
+}
+
+static const struct spi_master spi_master_dirtyjtag_spi = {
+ .features = SPI_MASTER_4BA,
+ .max_data_read = MAX_DATA_READ_UNLIMITED,
+ .max_data_write = MAX_DATA_WRITE_UNLIMITED,
+ .command = dirtyjtag_spi_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = default_spi_read,
+ .write_256 = default_spi_write_256,
+ .write_aai = default_spi_write_aai,
+ .shutdown = dirtyjtag_spi_shutdown,
+ .probe_opcode = default_spi_probe_opcode,
+};
+
+static int dirtyjtag_spi_init(const struct programmer_cfg *cfg)
+{
+ struct libusb_device_handle *handle = NULL;
+ struct dirtyjtag_spi_data *djtag_data = NULL;
+
+ djtag_data = calloc(1, sizeof(struct dirtyjtag_spi_data));
+ if (djtag_data == NULL) {
+ msg_perr("%s: failed to allocate internal driver data structure\n", __func__);
+ return -1;
+ }
+
+ int ret = libusb_init(&djtag_data->libusb_ctx);
+ if (ret < 0) {
+ msg_perr("%s: couldn't initialize libusb!\n", __func__);
+ goto cleanup_djtag_struct;
+ }
+
+#if LIBUSB_API_VERSION < 0x01000106
+ libusb_set_debug(djtag_data->libusb_ctx, 3);
+#else
+ libusb_set_option(djtag_data->libusb_ctx, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO);
+#endif
+
+ uint16_t vid = devs_dirtyjtag_spi[0].vendor_id;
+ uint16_t pid = devs_dirtyjtag_spi[0].device_id;
+ handle = libusb_open_device_with_vid_pid(djtag_data->libusb_ctx, vid, pid);
+ if (handle == NULL) {
+ msg_perr("%s: couldn't open device %04x:%04x.\n", __func__, vid, pid);
+ goto cleanup_libusb_ctx;
+ }
+
+ ret = libusb_detach_kernel_driver(handle, 0);
+ if (ret != 0 && ret != LIBUSB_ERROR_NOT_FOUND) {
+ msg_pwarn("Cannot detach the existing USB driver. Claiming the interface may fail. %s\n",
+ libusb_error_name(ret));
+ }
+
+ ret = libusb_claim_interface(handle, 0);
+ if (ret != 0) {
+ msg_perr("%s: failed to claim interface 0: '%s'\n", __func__, libusb_error_name(ret));
+ goto cleanup_libusb_handle;
+ }
+
+ djtag_data->libusb_handle = handle;
+
+ unsigned long int freq = 100;
+ char *tmp = extract_programmer_param_str(cfg, "spispeed");
+ if (tmp) {
+ char *units = tmp;
+
+ errno = 0;
+ freq = strtoul(tmp, &units, 0);
+ if (errno) {
+ msg_perr("Invalid frequency \"%s\", %s\n", tmp, strerror(errno));
+ free(tmp);
+ goto cleanup_libusb_handle;
+ }
+
+ if (!strcasecmp(units, "hz")) {
+ freq /= 1000;
+ } else if (!strcasecmp(units, "khz")) {
+ /* Do nothing, already in the right unit */
+ } else if (!strcasecmp(units, "mhz")) {
+ freq *= 1000;
+ } else {
+ msg_perr("Invalid unit: %s, use hz, khz or mhz\n", units);
+ free(tmp);
+ goto cleanup_libusb_handle;
+ }
+
+ if (freq > UINT16_MAX) {
+ msg_perr("%s: Frequency set above DJTAG1 limits (%d kHz)", __func__, UINT16_MAX);
+ free(tmp);
+ goto cleanup_libusb_handle;
+ }
+
+ msg_pinfo("%s: programmer speed set to %lu kHz\n", __func__, freq);
+ }
+ free(tmp);
+
+ uint8_t commands[] = {
+ CMD_SETSIG, /* Set TDI/TCK to low, SRST/TRST/TMS to high */
+ SIG_TDI | SIG_TMS | SIG_TCK | SIG_SRST | SIG_TRST,
+ SIG_SRST | SIG_TRST | SIG_TMS,
+
+ CMD_FREQ, /* Set frequency */
+ (freq >> 8) & 0xff,
+ freq & 0xff,
+
+ CMD_STOP,
+ };
+ ret = dirtyjtag_send(djtag_data, commands, sizeof(commands));
+ if (ret != 0) {
+ msg_perr("%s: failed to configure DirtyJTAG into initialized state\n", __func__);
+ goto cleanup_libusb_handle;
+ }
+
+ return register_spi_master(&spi_master_dirtyjtag_spi, (void*)djtag_data);
+
+cleanup_libusb_handle:
+ libusb_attach_kernel_driver(handle, 0);
+ libusb_close(handle);
+
+cleanup_libusb_ctx:
+ libusb_exit(djtag_data->libusb_ctx);
+
+cleanup_djtag_struct:
+ free(djtag_data);
+ return -1;
+}
+
+const struct programmer_entry programmer_dirtyjtag_spi = {
+ .name = "dirtyjtag_spi",
+ .type = USB,
+ .devs.dev = devs_dirtyjtag_spi,
+ .init = dirtyjtag_spi_init,
+};
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 5579011..e672869 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -431,6 +431,8 @@
.sp
.BR "* mediatek_i2c_spi" " (for SPI flash ROMs attached to some Mediatek display devices accessible over I2C)"
.sp
+.BR "* dirtyjtag_spi" " (for SPI flash ROMs attached to DirtyJTAG-compatible devices)"
+.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
.B PROGRAMMER-SPECIFIC INFORMATION
@@ -1441,6 +1443,22 @@
.BR 62.5k ", " 125k ", " 250k ", " 500k ", " 1M ", " 2M " or " 4M
(in Hz). The default is a frequency of 4 MHz.
.sp
+.BR "dirtyjtag_spi " programmer
+.IP
+An optional
+.B freq
+parameter specifies the frequency of the SPI bus.
+Syntax is
+.sp
+.B " flashrom \-p dirtyjtag_spi:spispeed=frequency"
+.sp
+where
+.B spispeed
+can be
+.BR any value in hertz, kilohertz or megahertz supported by the
+programmer. The default is a frequency of 100 KHz.
+.sp
+.SS
.SS
.BR "jlink_spi " programmer
.IP
@@ -1671,7 +1689,7 @@
have to be run as superuser/root, and need additional raw access permission.
.sp
.BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi ", " ft2232_spi ", " pickit2_spi ", " \
-ch341a_spi " and " digilent_spi
+ch341a_spi ", " digilent_spi " and " dirtyjtag_spi
can be run as normal user on most operating systems if appropriate device
permissions are set.
.sp
diff --git a/include/programmer.h b/include/programmer.h
index bfce5d6..9603443 100644
--- a/include/programmer.h
+++ b/include/programmer.h
@@ -95,6 +95,7 @@
extern const struct programmer_entry programmer_serprog;
extern const struct programmer_entry programmer_stlinkv3_spi;
extern const struct programmer_entry programmer_usbblaster_spi;
+extern const struct programmer_entry programmer_dirtyjtag_spi;
int programmer_init(const struct programmer_entry *prog, const char *param);
int programmer_shutdown(void);
diff --git a/meson.build b/meson.build
index 050631d..3a6cc41 100644
--- a/meson.build
+++ b/meson.build
@@ -202,6 +202,12 @@
'srcs' : files('digilent_spi.c'),
'flags' : [ '-DCONFIG_DIGILENT_SPI=1' ],
},
+ 'dirtyjtag_spi' : {
+ 'deps' : [ libusb1 ],
+ 'groups' : [ group_usb, group_external ],
+ 'srcs' : files('dirtyjtag_spi.c'),
+ 'flags' : [ '-DCONFIG_DIRTYJTAG_SPI=1' ],
+ },
'drkaiser' : {
'systems' : systems_hwaccess,
'deps' : [ libpci ],
diff --git a/meson_options.txt b/meson_options.txt
index be56ac7..8c04029 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -10,8 +10,8 @@
'group_internal', 'group_external',
'group_ftdi', 'group_i2c', 'group_jlink', 'group_pci', 'group_serial', 'group_usb',
'atahpt', 'atapromise', 'atavia', 'buspirate_spi', 'ch341a_spi', 'dediprog', 'developerbox_spi',
- 'digilent_spi', 'drkaiser', 'dummy', 'ft2232_spi', 'gfxnvidia', 'internal', 'it8212', 'jlink_spi',
- 'linux_mtd', 'linux_spi', 'mediatek_i2c_spi', 'mstarddc_spi', 'nic3com', 'nicintel',
+ 'digilent_spi', 'dirtyjtag_spi', 'drkaiser', 'dummy', 'ft2232_spi', 'gfxnvidia', 'internal', 'it8212',
+ 'jlink_spi', 'linux_mtd', 'linux_spi', 'mediatek_i2c_spi', 'mstarddc_spi', 'nic3com', 'nicintel',
'nicintel_eeprom', 'nicintel_spi', 'nicnatsemi', 'nicrealtek', 'ogp_spi', 'parade_lspcon',
'pickit2_spi', 'pony_spi', 'raiden_debug_spi', 'rayer_spi', 'realtek_mst_i2c_spi', 'satamv',
'satasii', 'serprog', 'stlinkv3_spi', 'usbblaster_spi',
diff --git a/programmer_table.c b/programmer_table.c
index 818cea7..d58a155 100644
--- a/programmer_table.c
+++ b/programmer_table.c
@@ -167,6 +167,10 @@
#if CONFIG_STLINKV3_SPI == 1
&programmer_stlinkv3_spi,
#endif
+
+#if CONFIG_DIRTYJTAG_SPI == 1
+ &programmer_dirtyjtag_spi,
+#endif
};
const size_t programmer_table_size = ARRAY_SIZE(programmer_table);
diff --git a/test_build.sh b/test_build.sh
index 717df00..69d3a34 100755
--- a/test_build.sh
+++ b/test_build.sh
@@ -10,11 +10,11 @@
PICKIT2_SPI STLINKV3_SPI PARADE_LSPCON MEDIATEK_I2C_SPI REALTEK_MST_I2C_SPI DUMMY \
DRKAISER NICREALTEK NICNATSEMI NICINTEL NICINTEL_SPI NICINTEL_EEPROM OGP_SPI \
BUSPIRATE_SPI DEDIPROG DEVELOPERBOX_SPI SATAMV LINUX_MTD LINUX_SPI IT8212 \
- CH341A_SPI DIGILENT_SPI JLINK_SPI"
+ CH341A_SPI DIGILENT_SPI DIRTYJTAG_SPI JLINK_SPI"
meson_programmer_opts="all auto group_ftdi group_i2c group_jlink group_pci group_serial group_usb \
atahpt atapromise atavia buspirate_spi ch341a_spi dediprog developerbox_spi \
- digilent_spi drkaiser dummy ft2232_spi gfxnvidia internal it8212 \
+ digilent_spi dirtyjtag_spi drkaiser dummy ft2232_spi gfxnvidia internal it8212 \
jlink_spi linux_mtd linux_spi parade_lspcon mediatek_i2c_spi mstarddc_spi \
nic3com nicintel nicintel_eeprom nicintel_spi nicnatsemi nicrealtek \
ogp_spi pickit2_spi pony_spi raiden_debug_spi rayer_spi realtek_mst_i2c_spi \
To view, visit change 67878. To unsubscribe, or for help writing mail filters, visit settings.