David Hendricks has uploaded this change for review.
WIP: flashchips: Use 4BA for W25Q256JV
For some reason W25Q256JV must use native 4BA instructions to work
with 4BA addresses on Dediprog SF600 programmers.
This just makes the W25Q256JV work with the SF600 and should not be
committed. Marking as WIP for now.
Change-Id: I8359dd665a9dfa2eba520d03fcddc2654b598fda
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
---
M flashchips.c
1 file changed, 2 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/22/30522/1
diff --git a/flashchips.c b/flashchips.c
index d85ea74..2c3356b 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -15759,7 +15759,8 @@
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
+// .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_NATIVE,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
To view, visit change 30522. To unsubscribe, or for help writing mail filters, visit settings.