Attention is currently required from: Felix Singer, Thomas Heijligen, Angel Pons, qianfan, Anastasia Klimchuk, Alexander Goncharov.

Nicholas Chin uploaded patch set #8 to this change.

View Change

ch347_spi: Add initial support for the WCH CH347

Add support for the WCH CH347, a high-speed USB to bus converter
supporting multiple protocols interfaces including SPI. Currently only
mode 1 (vendor defined communication interface) is supported, mode 2
(USB HID communication interface) support will be added later. The code
is currently hard coded to use CS1 and a SPI clock of 15 MHz, though
there are 2 CS lines and 6 other GPIO lines available, as well as a
configurable clock divisor for up to 60MHz operation. Support for these
will be exposed through programmer parameters in later commits.

This currently uses the synchronous libusb API. Performance seems to be
alright so far, if it becomes an issue I may switch to the asynchronous
API.

Tested with a MX25L1606E flash chip

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: I31b86c41076cc45d4a416a73fa1131350fb745ba
---
M MAINTAINERS
M Makefile
A ch347_spi.c
M flashrom.8.tmpl
M include/programmer.h
M meson.build
M meson_options.txt
M programmer_table.c
M test_build.sh
9 files changed, 410 insertions(+), 9 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/73/70573/8

To view, visit change 70573. To unsubscribe, or for help writing mail filters, visit settings.