Hello David Hendricks, build bot (Jenkins),
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/17945
to look at the new patch set (#10).
Change subject: Add functions to read/erase/write/verify by layout ......................................................................
Add functions to read/erase/write/verify by layout
Inspired by Lynxis' related work, this implements a foundation for layout based flash access.
All operations iterate over the given layout regions. Erase and write then walk, per region, over all erase blocks in an inner loop (which might not be what we want, see note on optimization below). Special care has been taken that flash content is merged properly, in case an erase block is only partially covered by a layout region or even affects mul- tiple regions.
A note on performance: In the case an erase block affects multiple regions, it will probably be read, erased and written for each region. Another approach would be to walk all erase blocks once and check for each erase block which regions it touches (i.e. for each erase block, merge data pontentially from the flash and all layout regions, then flash the combined data). That might result in cleaner code. I haven't tried it yet, though.
Change-Id: Ic6194cea4c4c430e0cf9d586052508a865b09c86 Signed-off-by: Nico Huber nico.huber@secunet.com --- M flash.h M flashrom.c 2 files changed, 352 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/45/17945/10