Ssunk has uploaded this change for review.

View Change

flashchips: Add Support for XMC XM25QH512C/XM25QH512D

Add initial support for the SPI flash chip XM25QH512C/XM25QH512D
Datasheet link: https://www.xmcwh.com/uploads/803/XM25QH512C_V1.6.pdf

Tested with ch341a programmer: probe, read, write, erase

Change-Id: Ica8ed5eaba2435a9416274b94f633ea40dfeea2f
Signed-off-by: Kan Sun <ssunkkan@gmail.com>
---
M flashchips.c
M include/flashchips.h
2 files changed, 49 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/42/83242/1
diff --git a/flashchips.c b/flashchips.c
index 61c2127..64677ca 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -22434,6 +22434,54 @@
},

{
+ .vendor = "XMC",
+ .name = "XM25QH512C/XM25QH512D",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QH512C,
+ .total_size = 64*1024,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
+ | FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
+ .tested = TEST_OK_PREW,
+ .probe = PROBE_SPI_RDID,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = SPI_BLOCK_ERASE_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = SPI_BLOCK_ERASE_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 2048} },
+ .block_erase = SPI_BLOCK_ERASE_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = SPI_BLOCK_ERASE_DC,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = SPI_BLOCK_ERASE_D8,
+ }, {
+ .eraseblocks = { {64 * 1024 * 1024, 1} },
+ .block_erase = SPI_BLOCK_ERASE_60,
+ }, {
+ .eraseblocks = { {64 * 1024 * 1024, 1} },
+ .block_erase = SPI_BLOCK_ERASE_C7,
+ }
+ },
+ .printlock = SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
+ .unlock = SPI_DISABLE_BLOCKPROTECT,
+ .write = SPI_CHIP_WRITE256,
+ .read = SPI_CHIP_READ,
+ .voltage = {2700, 3600},
+ },
+
+ {
.vendor = "XTX Technology Limited",
.name = "XT25F02E",
.bustype = BUS_SPI,
diff --git a/include/flashchips.h b/include/flashchips.h
index 9b4b2f9..e4a9e28 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -858,6 +858,7 @@
#define XMC_XM25QH256C 0x4019 /* Same as XM25QH256D */
#define XMC_XM25QU256C 0x4119 /* Same as XM25QU256D */
#define XMC_XM25RU256C 0x4419
+#define XMC_XM25QH512C 0x4020 /* Same as XM25QH512D */
#define ST_M25PX80 0x7114
#define ST_M25PX16 0x7115
#define ST_M25PX32 0x7116

To view, visit change 83242. To unsubscribe, or for help writing mail filters, visit settings.

Gerrit-MessageType: newchange
Gerrit-Project: flashrom
Gerrit-Branch: main
Gerrit-Change-Id: Ica8ed5eaba2435a9416274b94f633ea40dfeea2f
Gerrit-Change-Number: 83242
Gerrit-PatchSet: 1
Gerrit-Owner: Ssunk <ssunkkan@gmail.com>