Attention is currently required from: Felix Singer, Thomas Heijligen, Angel Pons, Anastasia Klimchuk.

Steve Markgraf uploaded patch set #6 to this change.

View Change

programmer: Add bitbanging programmer driver for Linux libgpiod

With this driver, any single board computer, old smartphone, etc. with
a few spare GPIOs can be used for flashrom.

Tested by reading of a 2048 kB flash chip on a Qualcomm MSM8916 SoC
@800 MHz, ran the following command:

time flashrom -p linux_gpiod:gpiochip=0,cs=18,sck=19,mosi=13,miso=56 -r test.bin

This command uses /dev/gpiochip0 with the specified GPIO numbers for the
SPI lines. All arguments are mandatory.

Output:
[...]
Found GigaDevice flash chip "GD25LQ16" (2048 kB, SPI) on linux_gpiod.
[...]
real    1m 33.96s

Change-Id: Icad3eb7764f28feaea51bda3a7893da724c86d06
Signed-off-by: Steve Markgraf <steve@steve-m.de>
---
M Documentation/building.md
M MAINTAINERS
M Makefile
M README
M flashrom.8.tmpl
M include/programmer.h
A linux_gpiod.c
M meson.build
M meson_options.txt
M programmer_table.c
M test_build.sh
M util/manibuilder/Dockerfile.alpine
M util/manibuilder/Dockerfile.centos
M util/manibuilder/Dockerfile.debian-debootstrap
M util/manibuilder/Dockerfile.fedora
M util/manibuilder/Dockerfile.ubuntu-debootstrap
M util/shell.nix
17 files changed, 289 insertions(+), 20 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/01/71801/6

To view, visit change 71801. To unsubscribe, or for help writing mail filters, visit settings.