1 comment:
Patch Set #2, Line 11: Good news everyone - ID/SZ and READ works now. cleanups++.
I just cherry-picked the commit and tested, however on my side it still doesn't seems good.
localhost ~ # ./flashrom -p realtek_mst_i2c_spi:bus=8 --flash-name
flashrom v1.2-37-gace20744-dirty on Linux 4.19.96 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Using i2c bus 8.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
That actually makes me to suspect there are something wrong on my board. All the commands fails for this same reason.
To view, visit change 40667. To unsubscribe, or for help writing mail filters, visit settings.