[LinuxBIOS] Request for superiotool dump support: SMSC LPC47M192

[Corey Osgood]

Hey guys,

I've been looking through the datasheet on this chip, and I've got no
idea where the values you use come from. I know some of you have been
adding dump support to various chips just for the sake of having them
(which is a good thing, and I'm glad you're doing it), so I was hoping
you might be able to do this one while you're at it.

Thanks,
Corey

[LinuxBIOS] Request for superiotool dump support: SMSC LPC47M192

Quoting Corey Osgood :
> Hey guys,
>
> I've been looking through the datasheet on this chip, and I've got no
> idea where the values you use come from. I know some of you have been
> adding dump support to various chips just for the sake of having them
> (which is a good thing, and I'm glad you're doing it), so I was hoping
> you might be able to do this one while you're at it.
>
> Thanks,
> Corey

I know the hundreds of pages on the datasheet can get a little  
munotinious. Which values are you confused about?

Thanks - Joe

[Corey Osgood]

On Dec 12, 2007 5:02 PM,  wrote:
> Quoting Corey Osgood :
> > Hey guys,
> >
> > I've been looking through the datasheet on this chip, and I've got no
> > idea where the values you use come from. I know some of you have been
> > adding dump support to various chips just for the sake of having them
> > (which is a good thing, and I'm glad you're doing it), so I was hoping
> > you might be able to do this one while you're at it.
> >
> > Thanks,
> > Corey
>
> I know the hundreds of pages on the datasheet can get a little
> munotinious. Which values are you confused about?
>
> Thanks - Joe

Well, not so much the values, but how superiotool uses/needs them. I'm
looking to check and compare the values of the super IO's GPIO registers in
an easy manner (and Debian no longer has hwtools, so no userspace inb/outb).
I have very little free time, so I was hoping someone who does know the ins
and outs of superiotool would whip it off.

Thanks,
Corey

[LinuxBIOS] Request for superiotool dump support: SMSC LPC47M192

Quoting Corey Osgood :
> On Dec 12, 2007 5:02 PM,  wrote:
> > Quoting Corey Osgood :
> > > Hey guys,
> > >
> > > I've been looking through the datasheet on this chip, and I've got no
> > > idea where the values you use come from. I know some of you have been
> > > adding dump support to various chips just for the sake of having them
> > > (which is a good thing, and I'm glad you're doing it), so I was hoping
> > > you might be able to do this one while you're at it.
> > >
> > > Thanks,
> > > Corey
> >
> > I know the hundreds of pages on the datasheet can get a little
> > munotinious. Which values are you confused about?
> >
> > Thanks - Joe
>
> Well, not so much the values, but how superiotool uses/needs them. I'm
> looking to check and compare the values of the super IO's GPIO registers in
> an easy manner (and Debian no longer has hwtools, so no userspace inb/outb).
> I have very little free time, so I was hoping someone who does know the ins
> and outs of superiotool would whip it off.
>
> Thanks,
> Corey

If I remember correctly I think it was Uwe that wrote the SMSC code  
for superiotool?? Maybe he has a dump?

Thanks - Joe

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

[Ulf Jordan]

On Wed, 12 Dec 2007, Corey Osgood wrote:
> Hey guys,
>
> I've been looking through the datasheet on this chip, and I've got no
> idea where the values you use come from. I know some of you have been
> adding dump support to various chips just for the sake of having them
> (which is a good thing, and I'm glad you're doing it), so I was hoping
> you might be able to do this one while you're at it.

Attached is a patch for superiotool adding dump support for the SMSC 
LPC47M192.

/ulf

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

[Corey Osgood]

Ulf Jordan wrote:
> On Wed, 12 Dec 2007, Corey Osgood wrote:
> > Hey guys,
> >
> > I've been looking through the datasheet on this chip, and I've got no
> > idea where the values you use come from. I know some of you have been
> > adding dump support to various chips just for the sake of having them
> > (which is a good thing, and I'm glad you're doing it), so I was hoping
> > you might be able to do this one while you're at it.
>
> Attached is a patch for superiotool adding dump support for the SMSC 
> LPC47M192.
>
> /ulf

Thanks, works great!

Acked-by: Corey Osgood

and r3007

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

[Ulf Jordan]

On Fri, 14 Dec 2007, Corey Osgood wrote:
> Ulf Jordan wrote:
> > Attached is a patch for superiotool adding dump support for the SMSC
> > LPC47M192.
> >
> > /ulf
>
> Thanks, works great!
>
> Acked-by: Corey Osgood
>
> and r3007

Could you provide example dumps and update the wiki status page at 
http://linuxbios.org/Superiotool ?

/ulf

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

[Corey Osgood]

Ulf Jordan wrote:
> On Fri, 14 Dec 2007, Corey Osgood wrote:
> > Ulf Jordan wrote:
> > > Attached is a patch for superiotool adding dump support for the SMSC
> > > LPC47M192.
> > >
> > > /ulf
> >
> > Thanks, works great!
> >
> > Acked-by: Corey Osgood
> >
> > and r3007
>
> Could you provide example dumps and update the wiki status page at 
> http://linuxbios.org/Superiotool ?
>
> /ulf

From the RCA RM4100, stock bios:

rm4100:~# superiotool -d
superiotool r3006
Found SMSC LPC47M15x/192/997 (id=0x60, rev=0x01) at 0x2e
Register dump:
idx 03 07 20 21 22 23 24 26 27 28 2a 2b 2c 2d 2e 2f
val 00 0a 60 01 10 00 44 2e 00 00 00 00 00 00 00 00
def RR 00 60 NA 00 00 44 MM MM RR NA NA NA NA NA NA
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2 f4 f5
val 00 03 f0 06 02 0e 00 ff 00 00
def 00 03 f0 06 02 0e 00 ff 00 00
LDN 0x03 (Parallel port)
idx 30 60 61 70 74 f0 f1
val 00 03 78 07 04 3c 00
def 00 00 00 00 04 3c 00
LDN 0x04 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 00 00 00 00 00
LDN 0x05 (COM2 / IR)
idx 30 60 61 70 f0 f1 f2
val 00 00 00 00 00 02 03
def NA 00 00 00 00 02 03
LDN 0x07 (Keyboard)
idx 30 70 72 f0
val 01 01 0c 00
def 00 00 00 00
LDN 0x09 (Game port)
idx 30 60 61
val 00 00 00
def 00 00 00
LDN 0x0a (Power Management Events (PME))
idx 30 60 61 f0
val 01 0a 00 00
def 00 00 00 NA
LDN 0x0b (MPU-401)
idx 30 60 61 70
val 00 03 30 05
def 00 03 30 05

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

[Uwe Hermann]

On Sat, Dec 15, 2007 at 10:16:07PM -0500, Corey Osgood wrote:
> From the RCA RM4100, stock bios:
>
> rm4100:~# superiotool -d
> superiotool r3006
> Found SMSC LPC47M15x/192/997 (id=0x60, rev=0x01) at 0x2e

Thanks, added to wiki.

Uwe.

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

Quoting Corey Osgood :
> Ulf Jordan wrote:
> > On Fri, 14 Dec 2007, Corey Osgood wrote:
> > > Ulf Jordan wrote:
> > > > Attached is a patch for superiotool adding dump support for the SMSC
> > > > LPC47M192.
> > > >
> > > > /ulf
> > >
> > > Thanks, works great!
> > >
> > > Acked-by: Corey Osgood
> > >
> > > and r3007
> >
> > Could you provide example dumps and update the wiki status page at
> > http://linuxbios.org/Superiotool ?
> >
> > /ulf

From the RCA RM4100 running corebootv2, please add to wiki:

[root@localhost ~]# superiotool -d
superiotool r3064
Found SMSC LPC47M15x/192/997 (id=0x60, rev=0x01) at 0x2e
Register dump:
idx 03 07 20 21 22 23 24 26  27 28 2a 2b 2c 2d 2e 2f
val 00 0b 60 01 10 00 44 2e  00 00 00 00 00 00 00 00
def RR 00 60 NA 00 00 44 MM  MM RR NA NA NA NA NA NA
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f4 f5
val 00 03 f0 06 02 0e 00 ff  00 00
def 00 03 f0 06 02 0e 00 ff  00 00
LDN 0x03 (Parallel port)
idx 30 60 61 70 74 f0 f1
val 00 00 00 00 04 3c 00
def 00 00 00 00 04 3c 00
LDN 0x04 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 03 00
def 00 00 00 00 00
LDN 0x05 (COM2 / IR)
idx 30 60 61 70 f0 f1 f2
val 00 00 00 00 00 02 03
def NA 00 00 00 00 02 03
LDN 0x07 (Keyboard)
idx 30 70 72 f0
val 01 01 0c 00
def 00 00 00 00
LDN 0x09 (Game port)
idx 30 60 61
val 00 00 00
def 00 00 00
LDN 0x0a (Power Management Events (PME))
idx 30 60 61 f0
val 01 0a 00 00
def 00 00 00 NA
LDN 0x0b (MPU-401)
idx 30 60 61 70
val 00 03 30 05
def 00 03 30 05

Thanks - Joe

[LinuxBIOS] [PATCH] Re: Request for superiotool dump support: SMSC LPC47M192

[Uwe Hermann]

On Sat, Feb 16, 2008 at 02:18:34PM -0500, [e-mail] wrote:
> From the RCA RM4100 running corebootv2, please add to wiki:
>
> [root@localhost ~]# superiotool -d
> superiotool r3064
> Found SMSC LPC47M15x/192/997 (id=0x60, rev=0x01) at 0x2e
> Register dump:
> idx 03 07 20 21 22 23 24 26  27 28 2a 2b 2c 2d 2e 2f
> val 00 0b 60 01 10 00 44 2e  00 00 00 00 00 00 00 00
> def RR 00 60 NA 00 00 44 MM  MM RR NA NA NA NA NA NA
> LDN 0x00 (Floppy)
> idx 30 60 61 70 74 f0 f1 f2  f4 f5
> val 00 03 f0 06 02 0e 00 ff  00 00
> def 00 03 f0 06 02 0e 00 ff  00 00
> LDN 0x03 (Parallel port)
> idx 30 60 61 70 74 f0 f1
> val 00 00 00 00 04 3c 00
> def 00 00 00 00 04 3c 00
> LDN 0x04 (COM1)
> idx 30 60 61 70 f0
> val 01 03 f8 03 00
> def 00 00 00 00 00
> LDN 0x05 (COM2 / IR)
> idx 30 60 61 70 f0 f1 f2
> val 00 00 00 00 00 02 03
> def NA 00 00 00 00 02 03
> LDN 0x07 (Keyboard)
> idx 30 70 72 f0
> val 01 01 0c 00
> def 00 00 00 00
> LDN 0x09 (Game port)
> idx 30 60 61
> val 00 00 00
> def 00 00 00
> LDN 0x0a (Power Management Events (PME))
> idx 30 60 61 f0
> val 01 0a 00 00
> def 00 00 00 NA
> LDN 0x0b (MPU-401)
> idx 30 60 61 70
> val 00 03 30 05
> def 00 03 30 05

Done, thanks.

Uwe.