[LinuxBIOS] Simple complie question

[Steve Casselman]

I'm adding print_debug statements to tyan/s2891 and
now I get some code overlap messages

/usr/bin/ld: section .reset [00000000fffffff0 ->
00000000ffffffff] overlaps section .rom
[00000000ffff6770 -> 000000010000014f]
/usr/bin/ld: section .id [00000000ffffff69 ->
00000000ffffff7f] overlaps section .rom
[00000000ffff6770 -> 000000010000014f]
/usr/bin/ld: section .romstrap [00000000ffffffa0 ->
00000000ffffffef] overlaps section .rom
[00000000ffff6770 -> 000000010000014f]

I'm not quite sure where this comes from. I've
compiled this many times and it works great. Where
(options config) are the setting for this?

A document pointer or a quick explaination would be
great

Thanks

Steve

[yhlu]

you need to increase ROM_IMAGE_SIZE in targets/tyan/s2891/Config.lb a
little bit.

YH

On 6/30/05, Steve Casselman  wrote:
> I'm adding print_debug statements to tyan/s2891 and
> now I get some code overlap messages
>
> /usr/bin/ld: section .reset [00000000fffffff0 ->
> 00000000ffffffff] overlaps section .rom
> [00000000ffff6770 -> 000000010000014f]
> /usr/bin/ld: section .id [00000000ffffff69 ->
> 00000000ffffff7f] overlaps section .rom
> [00000000ffff6770 -> 000000010000014f]
> /usr/bin/ld: section .romstrap [00000000ffffffa0 ->
> 00000000ffffffef] overlaps section .rom
> [00000000ffff6770 -> 000000010000014f]
>
> I'm not quite sure where this comes from. I've
> compiled this many times and it works great. Where
> (options config) are the setting for this?
>
> A document pointer or a quick explaination would be
> great
>
> Thanks
>
> Steve
>
> LinuxBIOS mailing list
> [e-mail]
> http://www.openbios.org/mailman/listinfo/linuxbios