Re: [coreboot] board_status.sh output from PC Engines ALIX 2c3

[Paul Menzel]

Am Mittwoch, den 13.08.2014, 23:25 +0100 schrieb Sevan / Venture37:
> > On 12 August 2014 07:11, Paul Menzel <[e-mail]> wrote:
> > > Thanks a lot. Could you please enable CBMEM console (menu Console) and
> > > time stamp capture (menu General)? Please check if CBMEM console is
> > > enabled in your payload (GRUB/SeaBIOS) too.
> >
> > Sure, will build a new image tonight & post up the results for you.
>
> done, this time there was no coreboot_timestamp.txt created

You did not enable time stamp collection. You need to enable them.
Please verify with the following command.

        $ grep TIMES .config
        CONFIG_COLLECT_TIMESTAMPS=y
> http://pastebin.com/16LBAfBL

Thanks. Could you please attach the files to save the work to create and
cop- paste the contents manually? In my opinion paste bin services are
only useful for IRC. For emails you should always paste directly or
attach the content.


Thanks,

Paul


PS: It’d be great if you opened a separate thread about your issue with
`board_status.sh -u`.


Thanks,

Paul

board_status.sh output from PC Engines ALIX 2c3

[Sevan / Venture37]

On 14 August 2014 06:50, Paul Menzel <[e-mail]> wrote:
> Am Mittwoch, den 13.08.2014, 23:25 +0100 schrieb Sevan / Venture37:
> > > On 12 August 2014 07:11, Paul Menzel <[e-mail]> wrote:
> > > > Thanks a lot. Could you please enable CBMEM console (menu Console) and
> > > > time stamp capture (menu General)? Please check if CBMEM console is
> > > > enabled in your payload (GRUB/SeaBIOS) too.
> > >
> > > Sure, will build a new image tonight & post up the results for you.
> >
> > done, this time there was no coreboot_timestamp.txt created
>
> You did not enable time stamp collection. You need to enable them.
> Please verify with the following command.
>
> $ grep TIMES .config
>         CONFIG_COLLECT_TIMESTAMPS=y
> > http://pastebin.com/16LBAfBL
>
> Thanks. Could you please attach the files to save the work to create and
> cop- paste the contents manually? In my opinion paste bin services are
> only useful for IRC. For emails you should always paste directly or
> attach the content.
>
> Thanks,
>
> Paul
>
> PS: It’d be great if you opened a separate thread about your issue with
> `board_status.sh -u`.

I'd assumed that attachment where stripped & for common courtesy to
subscribers, hence the use of paste bin.
Attached is a screenshot of the output from the command mentioned
about, the VM is running Debian 7.6.
The image I generated the reports from where build with those settings.
> PS: It’d be great if you opened a separate thread about your issue with
> `board_status.sh -u`.

I was not using board_status.sh -u, the script errors for the
submission were from trying to follow:
http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=util/board_status/...