[LinuxBIOS] RE: x86_64: calibrate_delay_direct and apic id lift for BSP

[Lu, Yinghai]

I have tried latest code..., except that, it works well.

YH

-----Original Message-----
From: Andi Kleen [mailto:[e-mail]] 
Sent: Friday, October 28, 2005 11:53 AM
To: Lu, Yinghai
Cc: [e-mail]; [e-mail];
[e-mail]
Subject: Re: x86_64: calibrate_delay_direct and apic id lift for BSP

On Friday 28 October 2005 20:42, Yinghai Lu wrote:
> andi,
>
> I tried to lift apic id in LinuxBIOS for all cpus after 0x10.
>
> When using MB with AMD8111, the jiffies was not moving. So it is
> locked at calibrate_delay_direct...

Have you tried it with 2.6.14? It has some new code to handle
high apic ids better
> but  MB with Nvidia ck804, jiffies is moving.

The timer is wired different on nvidia than on 8111. They can
go either through the 8259 or through the IOAPIC.  There is still
some code that falls back to the 8259 if IOAPIC doesn't work,
which may make it appear working on Nvidia.

As a warning I'm about to remove that code so don't rely on it.
> If I don't change BSP apic id ( keep it to 0), It changes....
>
> I have no idea how the jiffies changes, there is another thread change
> it....?

They change when interrupt 0 fires. So it's probably misrouted
or similar.


-Andi

[LinuxBIOS] Re: x86_64: calibrate_delay_direct and apic id lift for BSP

[Yinghai Lu]

I wonder if 8111 only support 4 bit apicid, so it can not send irq to
BSP at apic id 0x10....

YH

On 10/28/05, Lu, Yinghai <[e-mail]> wrote:
> I have tried latest code..., except that, it works well.
>
> YH
>
> -----Original Message-----
> From: Andi Kleen [mailto:[e-mail]]
> Sent: Friday, October 28, 2005 11:53 AM
> To: Lu, Yinghai
> Cc: [e-mail]; [e-mail];
> [e-mail]
> Subject: Re: x86_64: calibrate_delay_direct and apic id lift for BSP
>
> On Friday 28 October 2005 20:42, Yinghai Lu wrote:
> > andi,
> >
> > I tried to lift apic id in LinuxBIOS for all cpus after 0x10.
> >
> > When using MB with AMD8111, the jiffies was not moving. So it is
> > locked at calibrate_delay_direct...
>
> Have you tried it with 2.6.14? It has some new code to handle
> high apic ids better
> > but  MB with Nvidia ck804, jiffies is moving.
>
> The timer is wired different on nvidia than on 8111. They can
> go either through the 8259 or through the IOAPIC.  There is still
> some code that falls back to the 8259 if IOAPIC doesn't work,
> which may make it appear working on Nvidia.
>
> As a warning I'm about to remove that code so don't rely on it.
> > If I don't change BSP apic id ( keep it to 0), It changes....
> >
> > I have no idea how the jiffies changes, there is another thread change
> > it....?
>
> They change when interrupt 0 fires. So it's probably misrouted
> or similar.
>
> -Andi
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[LinuxBIOS] Re: x86_64: calibrate_delay_direct and apic id lift for BSP

[Andi Kleen]

On Friday 28 October 2005 22:19, Yinghai Lu wrote:
> I wonder if 8111 only support 4 bit apicid, so it can not send irq to
> BSP at apic id 0x10....

Well, you being at AMD are probably in a much better position to find
out than most other folks. Or try the datasheet from the website.

-Andi