Hi David, Yinghai
First of all, thanks for the feedback.
David Hendricks wrote:
I'm guessing that you are using an nForce3 board for a socket
processor. The MSI K8N-Neo3 has a CK804 with a 754 pin socket, if that
helps. I believe there was even someone from MSI at the last LinuxBIOS
summit, so at least they have a clue :-)
It is good to see that companies are looking into open source solutions now. I think that
the consumer pressure is building up.
On 7/21/06, *yhlu* <yinghailu(a)gmail.com <mailto:firstname.lastname@example.org>> wrote:
It is using NVIDIA nForce3 too.
As I noted on Asus site, it lists it as a NForce4 4x (not full Hypertransport, only 800MHz
as far as I understand). Is this not supported, then?