Yes, may only sio_enable() and struct pnp_dev_info and enumerate should be specific.
-----邮件原件----- 发件人: email@example.com [mailto:firstname.lastname@example.org] 发送时间: 2004年1月14日 16:50 收件人: YhLu 抄送: ron minnich; email@example.com 主题: Re: SuperIO w83627hf. support.
YhLu YhLu@tyan.com writes:
Eric or Ron or Stefan,,
I want to who's dev src/superio/NSC/pc87360.
I have tried to copy and modify for winbond/w83627hf to make FDC and Keyboard to work. Some resource can not be set to the several reg.
The only piece I am seeing, is that the irq resources that are not hard coded are not being allocated automatically.
The basic problem is that we don't have an irq allocator in LinuxBIOS, We also could use a legacy address allocator as well to automatically put these things at their legacy addresses if possible.
My latest build (still needs to be merged) I just turned off all of the devices I didn't care about which made the irq assignment problems go away. It is a bad long term solution but it is ok in the short term.
Can you tell why call it 2e...
Because that is the base configuration port. Figuring out what kind of paths to use for devices like this is a bit of a challenge.
I forget but I think there was a considerable about of infrastructure in the super.c file you copied that probably should be moved to a generic file some place.