[LinuxBIOS] r6 - buildrom-devel/buildrom/bin

Author: rminnich
Date: 2007-05-08 20:25:34 +0200 (Tue, 08 May 2007)
New Revision: 6

Added:
   buildrom-devel/buildrom/bin/checkrom.sh
   buildrom-devel/buildrom/bin/doquilt.sh
   buildrom-devel/buildrom/bin/fetchgit.sh
   buildrom-devel/buildrom/bin/fetchsvn.sh
   buildrom-devel/buildrom/bin/getsig.sh
   buildrom-devel/buildrom/bin/setsig.sh
   buildrom-devel/buildrom/bin/verify-rom.sh
Log:
Adding the +x bit.

Signed-off-by: Ronald G. Minnich <[e-mail]>
Ackd-by: Ronald G. Minnnich <[e-mail]>



Added: buildrom-devel/buildrom/bin/checkrom.sh
===================================================================
--- buildrom-devel/buildrom/bin/checkrom.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/checkrom.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+size=`du -b $1 | cut -f1`
+delta=`expr 884736 - $size`
+echo "Bytes left in ROM: $delta"
+
+if [ $delta -lt 0 ]; then 
+	echo "ERROR! ERROR! ERROR!"
+	echo "The ELF image $1 is too big!"
+	exit -1
+fi
+
+exit 0


Property changes on: buildrom-devel/buildrom/bin/checkrom.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: buildrom-devel/buildrom/bin/doquilt.sh
===================================================================
--- buildrom-devel/buildrom/bin/doquilt.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/doquilt.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,32 @@
+#!/bin/bash
+# This script sets up the quilt directory and patches the package
+
+DIR=$1; shift
+
+# if the .pc directory already exists, then we will boldy assume
+# that quilt has been previously applied.  Aggressively restore the tree
+# to pristine
+
+if [ -d $DIR/.pc ]; then
+	pushd $DIR > /dev/null
+	quilt pop -qaf > /dev/null 2>&1
+	popd > /dev/null
+fi
+
+mkdir -p $DIR/patches
+echo "# $DIR quilt series" > $DIR/patches/series
+
+# If there are no patches to apply, fail cleanly
+
+if [ $# -eq 0 ]; then
+	exit 0
+fi
+
+while [ $# -gt 0 ]; do
+    echo `basename $1` >> $DIR/patches/series
+    cp $1 $DIR/patches
+    shift
+done
+
+cd $DIR
+quilt push -qa


Property changes on: buildrom-devel/buildrom/bin/doquilt.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: buildrom-devel/buildrom/bin/fetchgit.sh
===================================================================
--- buildrom-devel/buildrom/bin/fetchgit.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/fetchgit.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,30 @@
+#!/bin/sh
+# Check out or update a GIT repository
+
+URL=$1
+DIR=$2
+TAG=$3
+TARBALL=$4
+
+# If the base git directory doesn't exist, then we need to clone it
+
+if [ ! -d $DIR/git ]; then 
+	echo "Cloning $URL..."
+	git-clone --bare $URL $DIR/git
+	if [ $? -ne 0 ]; then
+		echo "Couldn't clone $URL."
+		exit 1
+	fi
+fi
+
+# Fetch the latest and greatest bits
+
+export GIT_DIR=$DIR/git
+
+git-fetch $URL
+git-fetch --tags $URL
+git-prune-packed
+git-pack-redundant --all | xargs -r rm
+
+# Make the tarball 
+git-tar-tree $TAG git | gzip > $TARBALL


Property changes on: buildrom-devel/buildrom/bin/fetchgit.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: buildrom-devel/buildrom/bin/fetchsvn.sh
===================================================================
--- buildrom-devel/buildrom/bin/fetchsvn.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/fetchsvn.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,31 @@
+#!/bin/sh
+# Check out or update a SVN repository
+
+URL=$1
+DIR=$2
+REV=$3
+TARBALL=$4
+
+# Simple case - the repository doesn't exist
+
+if [ ! -d $DIR/svn/.svn ]; then
+	echo "Fetching $URL..."	
+	svn co -r $REV $URL $DIR/svn
+	if [ $? -ne 0 ]; then
+		echo "Couldn't fetch the code from $URL"
+		exit 1
+	fi	
+else
+	CURREV=`svn info $DIR/svn | grep "Last Changed Rev" | awk '{ print $4 }'`
+
+	if [ $CURREV -ne $REV ]; then
+		(cd $DIR/svn; \
+		echo "Updating from $CURREV to $REV"
+		svn update -r $REV || {
+			echo "Couldn't update the repository."
+			exit 1
+		})
+	fi
+fi
+
+tar -C $DIR -zcf $TARBALL svn 


Property changes on: buildrom-devel/buildrom/bin/fetchsvn.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: buildrom-devel/buildrom/bin/getsig.sh
===================================================================
--- buildrom-devel/buildrom/bin/getsig.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/getsig.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+# These should be fairly static - we can make them dynamic if we have to
+
+START="FFFC0"
+LEN="16"
+
+STR_BEGIN=`dc -e "16 i FFFC0 p"`
+STR_END=`expr $(STR_BEGIN) + $(LEN)`
+
+IN=$1
+
+if [ -z "$IN" -o -z "$SIG" ]; then
+	echo "usage:  ./getsig.sh <rom>"
+	exit 1
+fi
+
+dd if=$IN bs=1 skip=$STR_BEGIN count=$LEN 2>/dev/null


Property changes on: buildrom-devel/buildrom/bin/getsig.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: buildrom-devel/buildrom/bin/setsig.sh
===================================================================
--- buildrom-devel/buildrom/bin/setsig.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/setsig.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# These should be fairly static - we can make them dynamic if we have to
+
+START="FFFC0"
+LEN="16"
+
+STR_BEGIN=`dc -e "16 i FFFC0 p"`
+STR_END=`expr $STR_BEGIN + $LEN`
+
+IN=$1
+SIG=$2
+OUT=$3
+
+if [ -z "$IN" -o -z "$SIG" ]; then
+	echo "usage:  ./setsig.sh <input> <sig> <output>"
+	exit 1
+fi
+
+if [ -z "$OUT" ]; then
+	OUTPUT=/dev/stdout
+fi
+
+dd if=$IN bs=$STR_BEGIN count=1 > $OUT 2>/dev/null
+echo -n "$SIG" >> $OUT
+dd if=$IN bs=$STR_END skip=1 >> $OUT 2>/dev/null


Property changes on: buildrom-devel/buildrom/bin/setsig.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: buildrom-devel/buildrom/bin/verify-rom.sh
===================================================================
--- buildrom-devel/buildrom/bin/verify-rom.sh	                        (rev 0)
+++ buildrom-devel/buildrom/bin/verify-rom.sh	2007-05-08 18:25:34 UTC (rev 6)
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+ROM=$1
+if [ -z "$ROM" ]; then
+	echo "usage: ./verify-rom.sh <rom>"
+	exit 1
+fi
+
+echo -n "EC:  "
+dd if=$ROM bs=1 count=64k 2> /dev/null | md5sum | awk '{print $1}'
+
+echo -n "VSA: "
+dd if=$ROM bs=1 skip=64k count=64k 2> /dev/null | md5sum | awk '{print $1}'


Property changes on: buildrom-devel/buildrom/bin/verify-rom.sh
___________________________________________________________________
Name: svn:executable
   + *