So I have my new embedded board. It is running a chip set that is not supported, yet. I have all the doc's, that I think I will need. I would like to start trying to add support for the vt8605/vt8606 based board(s). Looking for some doc's on the linuxbios web page about were to start and what files tie in to the build, and where. Can some one point me to such a doc, or can we build such a doc. What files do I need to mod/build? What order should I work on them? What kind of response should I be looking for from the console to tell me if that step is working? Stating that I can get console running I the first place, yes my superIO is supported. Is there any "How to" that covers this, or is it time to build one. -Adam
you could try the linux journal articles for a start. Did you see them?
ron
On Wed, Jan 11, 2006 at 12:33:26PM -0800, Adam Talbot wrote:
Looking for some doc's on the linuxbios web page about were to start and what files tie in to the build, and where. Can some one point me to such a doc, or can we build such a doc. What files do I need to mod/build? What order should I work on them?
There's Ron's article on porting to AMD SC520 in LJ. Should be a good start in general terms. URL:http://www.linuxjournal.com/article/8120 HTH
Cool, I will start there. Thank you -Adam
Michal Szwaczko wrote:
On Wed, Jan 11, 2006 at 12:33:26PM -0800, Adam Talbot wrote:
Looking for some doc's on the linuxbios web page about were to start and what files tie in to the build, and where. Can some one point me to such a doc, or can we build such a doc. What files do I need to mod/build? What order should I work on them?
There's Ron's article on porting to AMD SC520 in LJ. Should be a good start in general terms. URL:http://www.linuxjournal.com/article/8120 HTH
-
Adam Talbot -
Michal Szwaczko -
Ronald G Minnich