I'm using the EPIA M10000: vt8623 northbridge (CLE266) and vt8235 southbridge. I haven't been able to get V2 to compile as yet for it. V1 compiles and runs properly but AGP doesn't work. I can't seem to find the right way to setup the GART and GATT. Without the datasheets, what can I do? Without AGP support, Xwindows will run but playing videos or doing 3D will crash the system. Also, I'm not sure how to setup the video encoder. I wouldn't recommend the EPIA M10000 simply because VIA has been anything but free and open with the specs. However, that's what I'm using until something better comes along. Good luck.
David
That's a real shame as it's the board I'd most like to use :-(
-marc
On Thu, 16 Sep 2004 Trellix78@aol.com wrote:
I'm using the EPIA M10000: vt8623 northbridge (CLE266) and vt8235 southbridge. I haven't been able to get V2 to compile as yet for it. V1 compiles and runs properly but AGP doesn't work. I can't seem to find the right way to setup the GART and GATT. Without the datasheets, what can I do? Without AGP support, Xwindows will run but playing videos or doing 3D will crash the system. Also, I'm not sure how to setup the video encoder. I wouldn't recommend the EPIA M10000 simply because VIA has been anything but free and open with the specs. However, that's what I'm using until something better comes along. Good luck.
David _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
-
Marc Nicholas -
Trellix78＠aol.com