Patch set updated for coreboot: cff0886 i82801dx: Replace romstage printk's

[Kyösti Mälkki]

Kyösti Mälkki ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/291

-gerrit

commit cff088663302dad956ec298a05482299f1c1cc81
Author: Kyösti Mälkki 
Date:   Mon Oct 17 17:37:45 2011 +0300

i82801dx: Replace romstage printk's

Patch is required to compile this with romcc.

Change-Id: I5c4c0f5b32e5edeb8c48d8455b3493ca79f8b452
    Signed-off-by: Kyösti Mälkki 
---
 src/southbridge/intel/i82801dx/early_smbus.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/src/southbridge/intel/i82801dx/early_smbus.c b/src/southbridge/intel/i82801dx/early_smbus.c
index f58cd86..00eaee0 100644
--- a/src/southbridge/intel/i82801dx/early_smbus.c
+++ b/src/southbridge/intel/i82801dx/early_smbus.c
@@ -41,7 +41,7 @@ static void enable_smbus(void)
 {
    device_t dev = PCI_DEV(0x0, 0x1f, 0x3);

-	printk(BIOS_DEBUG, "SMBus controller enabled\n");
+	print_debug("SMBus controller enabled\n");
    /* set smbus iobase */
    pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
    /* Set smbus enable */
@@ -117,9 +117,9 @@ static int smbus_read_byte(unsigned device, unsigned address)
    unsigned char global_status_register;
    unsigned char byte;

-	/* printk(BIOS_ERR, "smbus_read_byte\n"); */
+	/* print_err("smbus_read_byte\n"); */
    if (smbus_wait_until_ready() < 0) {
-		printk(BIOS_ERR, "SMBUS not ready (%02x)\n", -2);
+		print_err("SMBUS not ready (-2)\n");
    	return -2;
    }

@@ -145,13 +145,13 @@ static int smbus_read_byte(unsigned device, unsigned address)
         SMBUS_IO_BASE + SMBHSTCTL);
    /* poll for it to start */
    if (smbus_wait_until_active() < 0) {
-		printk(BIOS_ERR, "SMBUS not active (%02x)\n", -4);
+		print_err("SMBUS not active (-4)\n");
    	return -4;
    }

/* poll for transaction completion */
    if (smbus_wait_until_done() < 0) {
-		printk(BIOS_ERR, "SMBUS not completed (%02x)\n", -3);
+		print_err("SMBUS not completed (-3)\n");
    	return -3;
    }

@@ -161,10 +161,10 @@ static int smbus_read_byte(unsigned device, unsigned address)
    byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);

if (global_status_register != 2) {
-		//printk(BIOS_SPEW, "%s: no device (%02x, %02x)\n", __func__, device, address);
+		//print_spew("%s: no device (%02x, %02x)\n", __func__, device, address);
    	return -1;
    }
-	//printk(BIOS_DEBUG, "%s: %02x@%02x = %02x\n", __func__, device, address, byte);
+	//print_debug("%s: %02x@%02x = %02x\n", __func__, device, address, byte);
    return byte;
 }