Re: [coreboot] Change superio in "Bayley Bay FSP-based CRB"

[Jose Trujillo]

Hello Zvika,

Add your device in Konfig and configure it under devicetree.
Look for examples and/or previous threads in this mail list.

Jose.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, October 8, 2018 12:02 AM, Zvi Vered <[e-mail]> wrote:
> Hello,
>
> I have to port coreboot to a "Bay Trail" board (KONTRON).
> I selected "Bayley Bay FSP-based CRB" as a reference.
>
> In my board, the output of superiotool is:
> Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x41) at 0x2e
>
> But the configuration of the reference board is:
> *** Super I/O ***
>
> How can I change it ?
>
> I wish there was a basic configuration that could be easily modified.
>
> Thank you,
> Zvika
>
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> coreboot mailing list: [e-mail]
> https://mail.coreboot.org/mailman/listinfo/coreboot