Hi Uwe,
Thanks for the review. I have updated the patch based on your review. The new patch needs Nikolay's CS5530/CS5536 PIRQ patch.
I cannot run superiotool with the factory BIOS because the BIOS is WinCE.
WakeOnLan doesn't work out of the box. The original thin-clients manager is able to on/off WOL feature as far as I remember.
It's a PC97317 board. Strange, the superiotool r2992 says "No Super I/O found"
NIC is soldered on the motherboard, and it resides on pci 15.0. Fixed the config entry.
Floppy connector may be available in one of the pin headers but I can't confirm. I leave it off to be conservative.
COM2 is a regular DB9 serial. Fixed the comment.
irq_tables.c in the previous patch was re-generated by getpir tool, and manually edited. However I had no way of testing it. Linux kernel won't read it unless patched, you know. Anyway I reworked on this file using Nikolay's irq patch.
As for MiniPCI slot there are INTA and INTB by definition of the MiniPCI. lspci output had no 14.0 because it's a slot. I installd a WiFi card to the MiniPCI slot(PCI 14.0) for testing. It got IRQ9 and worked great!
Regards, Kenji Noguchi
-
Kenji Noguchi -
Uwe Hermann