Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji
Can you provide info below: 1. Platform/SoC ? 2. Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
Hi Naresh,
Please find the details.
1.Platform/SOC ? -> Intel atom Denverton c3508 2. Verbose flashrom output(append -VVV in commandline)
# flashrom -p internal -w coreboot.rom -VVV flashrom v1.1 on Linux 5.4.45 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.5, GCC 8.4.0, little endian Command line (5 args): flashrom -p internal -w coreboot.rom -VVV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "BIOS", is_writeable: 1, numeraseregions: 0, total_size: 16777216, erasesize: 65536 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). coreboot last image size (not ROM size) is 16777216 bytes. page_size=1000 pre-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 post-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 programmer_map_flash_region: mapping Opaque flash chip from 0x00000000ff000000 to 0x00007f0e65645000 Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:Elinux_mtd_erase: ioctl: Input/output error Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. page_size=1000 pre-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 post-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 programmer_unmap_flash_region: unmapped 0x00007f0e65645000
On Wed, Oct 14, 2020 at 9:54 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Can you provide info below:
- Platform/SoC ?
- Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
-- Best regards, Naresh G. Solanki
Since its using intel-spi driver, try to get kernel log(especially intel-spi driver logs) to understand the failure. OR Unload intel-spi driver & run flashrom(with verbose output) so that it can use chipset_flash_enable. Note: To add support for this SoC in flashrom, you may have to add below line in chipset_enable.c {0x8086, 0x19e0, B_S, DEP, "Intel", "Denverton", enable_flash_pch100}, & compile flashrom.
Regards, Naresh
On Wed, Oct 14, 2020 at 9:03 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Hi Naresh,
Please find the details.
1.Platform/SOC ? -> Intel atom Denverton c3508 2. Verbose flashrom output(append -VVV in commandline)
# flashrom -p internal -w coreboot.rom -VVV flashrom v1.1 on Linux 5.4.45 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.5, GCC 8.4.0, little endian Command line (5 args): flashrom -p internal -w coreboot.rom -VVV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "BIOS", is_writeable: 1, numeraseregions: 0, total_size: 16777216, erasesize: 65536 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). coreboot last image size (not ROM size) is 16777216 bytes. page_size=1000 pre-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 post-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 programmer_map_flash_region: mapping Opaque flash chip from 0x00000000ff000000 to 0x00007f0e65645000 Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:Elinux_mtd_erase: ioctl: Input/output error Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
You may now reboot or simply leave the machine running. page_size=1000 pre-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 post-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 programmer_unmap_flash_region: unmapped 0x00007f0e65645000
On Wed, Oct 14, 2020 at 9:54 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Can you provide info below:
- Platform/SoC ?
- Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji +1-319-573-9768
Thanks Naresh for the details. I will add the support in the flashrom and test it.
On Wed, Oct 14, 2020 at 11:34 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Since its using intel-spi driver, try to get kernel log(especially intel-spi driver logs) to understand the failure. OR Unload intel-spi driver & run flashrom(with verbose output) so that it can use chipset_flash_enable. Note: To add support for this SoC in flashrom, you may have to add below line in chipset_enable.c {0x8086, 0x19e0, B_S, DEP, "Intel", "Denverton", enable_flash_pch100}, & compile flashrom.
Regards, Naresh
On Wed, Oct 14, 2020 at 9:03 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Hi Naresh,
Please find the details.
1.Platform/SOC ? -> Intel atom Denverton c3508 2. Verbose flashrom output(append -VVV in commandline)
# flashrom -p internal -w coreboot.rom -VVV flashrom v1.1 on Linux 5.4.45 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.5, GCC 8.4.0, little endian Command line (5 args): flashrom -p internal -w coreboot.rom -VVV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "BIOS", is_writeable: 1, numeraseregions: 0, total_size: 16777216, erasesize: 65536 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). coreboot last image size (not ROM size) is 16777216 bytes. page_size=1000 pre-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 post-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 programmer_map_flash_region: mapping Opaque flash chip from 0x00000000ff000000 to 0x00007f0e65645000 Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:Elinux_mtd_erase: ioctl: Input/output error Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
You may now reboot or simply leave the machine running. page_size=1000 pre-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 post-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 programmer_unmap_flash_region: unmapped 0x00007f0e65645000
On Wed, Oct 14, 2020 at 9:54 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Can you provide info below:
- Platform/SoC ?
- Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji +1-319-573-9768
-- Best regards, Naresh G. Solanki
Naresh,
I have added Denverton support in the flashrom and I found that SMM Protection is enabled from the logs.
I have tried to disable it using setcpi utility and it remains the same value. Also the flashrom utility also tries but it remains the same.
Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xab to 0x89 failed.
Also FLOCKDN=1 is set as 1 as well.
I can clearly tell the BIOS region is read and writable but Protected registers are read only that's also the reason I am not able to write the BIOS region.
What are the options/methods to unlock / disable the Bios Write enable(BIOS_CNTL) or to access the HSFS registers to set the FLOCKDN bit to 0.
Any pointers would be appreciated!
Thanks, Balaji
On Wed, Oct 14, 2020 at 12:42 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Thanks Naresh for the details. I will add the support in the flashrom and test it.
On Wed, Oct 14, 2020 at 11:34 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Since its using intel-spi driver, try to get kernel log(especially intel-spi driver logs) to understand the failure. OR Unload intel-spi driver & run flashrom(with verbose output) so that it can use chipset_flash_enable. Note: To add support for this SoC in flashrom, you may have to add below line in chipset_enable.c {0x8086, 0x19e0, B_S, DEP, "Intel", "Denverton", enable_flash_pch100}, & compile flashrom.
Regards, Naresh
On Wed, Oct 14, 2020 at 9:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hi Naresh,
Please find the details.
1.Platform/SOC ? -> Intel atom Denverton c3508 2. Verbose flashrom output(append -VVV in commandline)
# flashrom -p internal -w coreboot.rom -VVV flashrom v1.1 on Linux 5.4.45 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.5, GCC 8.4.0, little endian Command line (5 args): flashrom -p internal -w coreboot.rom -VVV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "BIOS", is_writeable: 1, numeraseregions: 0, total_size: 16777216, erasesize: 65536 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). coreboot last image size (not ROM size) is 16777216 bytes. page_size=1000 pre-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 post-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 programmer_map_flash_region: mapping Opaque flash chip from 0x00000000ff000000 to 0x00007f0e65645000 Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:Elinux_mtd_erase: ioctl: Input/output error Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
You may now reboot or simply leave the machine running. page_size=1000 pre-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 post-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 programmer_unmap_flash_region: unmapped 0x00007f0e65645000
On Wed, Oct 14, 2020 at 9:54 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Can you provide info below:
- Platform/SoC ?
- Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji +1-319-573-9768
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji
--
Naresh,
Regarding adding support for denverton soc in flashrom, I could see a patch in flashrom but device id seems to be incorrect one. Any comments on this patch, as per soc device id should be 0x19e0. https://github.com/flashrom/flashrom/pull/58/commits
Thanks Bealaji
On Thu, Oct 22, 2020 at 6:42 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Naresh,
I have added Denverton support in the flashrom and I found that SMM Protection is enabled from the logs.
I have tried to disable it using setcpi utility and it remains the same value. Also the flashrom utility also tries but it remains the same.
Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xab to 0x89 failed.
Also FLOCKDN=1 is set as 1 as well.
I can clearly tell the BIOS region is read and writable but Protected registers are read only that's also the reason I am not able to write the BIOS region.
What are the options/methods to unlock / disable the Bios Write enable(BIOS_CNTL) or to access the HSFS registers to set the FLOCKDN bit to 0.
Any pointers would be appreciated!
Thanks, Balaji
On Wed, Oct 14, 2020 at 12:42 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Thanks Naresh for the details. I will add the support in the flashrom and test it.
On Wed, Oct 14, 2020 at 11:34 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Since its using intel-spi driver, try to get kernel log(especially intel-spi driver logs) to understand the failure. OR Unload intel-spi driver & run flashrom(with verbose output) so that it can use chipset_flash_enable. Note: To add support for this SoC in flashrom, you may have to add below line in chipset_enable.c {0x8086, 0x19e0, B_S, DEP, "Intel", "Denverton", enable_flash_pch100}, & compile flashrom.
Regards, Naresh
On Wed, Oct 14, 2020 at 9:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hi Naresh,
Please find the details.
1.Platform/SOC ? -> Intel atom Denverton c3508 2. Verbose flashrom output(append -VVV in commandline)
# flashrom -p internal -w coreboot.rom -VVV flashrom v1.1 on Linux 5.4.45 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.5, GCC 8.4.0, little endian Command line (5 args): flashrom -p internal -w coreboot.rom -VVV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "BIOS", is_writeable: 1, numeraseregions: 0, total_size: 16777216, erasesize: 65536 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). coreboot last image size (not ROM size) is 16777216 bytes. page_size=1000 pre-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 post-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 programmer_map_flash_region: mapping Opaque flash chip from 0x00000000ff000000 to 0x00007f0e65645000 Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:Elinux_mtd_erase: ioctl: Input/output error Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
You may now reboot or simply leave the machine running. page_size=1000 pre-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 post-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 programmer_unmap_flash_region: unmapped 0x00007f0e65645000
On Wed, Oct 14, 2020 at 9:54 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Can you provide info below:
- Platform/SoC ?
- Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hello Everyone,
We are using SPI flash(Macronix) to program the BIOS. And we use an external programmer to flash the BIOS (coreboot including FD+ME) into SPI Flash (16384 kB, SPI), it works fine and boots well. The board is functional and we have successfully booted a kernel on it.
Am working on adding a feature to upgrading the BIOS (complete IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to successfully take the backup full 16MB spi nor flash data which includes IFD+ME+BIOS using flashrom Internal Programmer option and it is identified as Opaque flash chip and using dd command as well.
But we are seeing the erase fail through both flashrom and flash_erase utility. I believe it fails to erase at the flash descriptor location.
As far as Read/Write access to the SPI regions, I have enabled the Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT Tool but still not able to erase it and it fails.
Is there anything that could be preventing to enable read/write access to the Intel flash descriptor or any SOC SPI controller protection to access the Flash descriptor?
Any pointers would be appreciated.
Thanks Balaji _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji +1-319-573-9768
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji
--
--
Thanks, Balaji +1-319-573-9768
It's possible that there are different device ids. Example for baytrail there are multiple ids. You need to add the did specific to your soc & build flashrom & use that.
Did you figureout where is BIOS_CNTRL.LE bit is getting set. FSPS or in Coreboot ? We need to prevent the bit from setting. As per flashrom logs you provided, bios_cntrl reg is at 0xab(10101011b) & this needs to be set to 0x89(10001001b) As mentioned earlier, enable smm logs, run flashrom & see in logs what fw is trying to do.
On Wed, Nov 11, 2020 at 7:16 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Naresh,
Regarding adding support for denverton soc in flashrom, I could see a patch in flashrom but device id seems to be incorrect one. Any comments on this patch, as per soc device id should be 0x19e0. https://github.com/flashrom/flashrom/pull/58/commits
Thanks Bealaji
On Thu, Oct 22, 2020 at 6:42 PM Balaji Sivakumar shivbalaji1985@gmail.com wrote:
Naresh,
I have added Denverton support in the flashrom and I found that SMM Protection is enabled from the logs.
I have tried to disable it using setcpi utility and it remains the same value. Also the flashrom utility also tries but it remains the same.
Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xab to 0x89 failed.
Also FLOCKDN=1 is set as 1 as well.
I can clearly tell the BIOS region is read and writable but Protected registers are read only that's also the reason I am not able to write the BIOS region.
What are the options/methods to unlock / disable the Bios Write enable(BIOS_CNTL) or to access the HSFS registers to set the FLOCKDN bit to 0.
Any pointers would be appreciated!
Thanks, Balaji
On Wed, Oct 14, 2020 at 12:42 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Thanks Naresh for the details. I will add the support in the flashrom and test it.
On Wed, Oct 14, 2020 at 11:34 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Since its using intel-spi driver, try to get kernel log(especially intel-spi driver logs) to understand the failure. OR Unload intel-spi driver & run flashrom(with verbose output) so that it can use chipset_flash_enable. Note: To add support for this SoC in flashrom, you may have to add below line in chipset_enable.c {0x8086, 0x19e0, B_S, DEP, "Intel", "Denverton", enable_flash_pch100}, & compile flashrom.
Regards, Naresh
On Wed, Oct 14, 2020 at 9:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
Hi Naresh,
Please find the details.
1.Platform/SOC ? -> Intel atom Denverton c3508 2. Verbose flashrom output(append -VVV in commandline)
# flashrom -p internal -w coreboot.rom -VVV flashrom v1.1 on Linux 5.4.45 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.5, GCC 8.4.0, little endian Command line (5 args): flashrom -p internal -w coreboot.rom -VVV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer get_mtd_info: device_name: "BIOS", is_writeable: 1, numeraseregions: 0, total_size: 16777216, erasesize: 65536 Opened /dev/mtd0 successfully The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). coreboot last image size (not ROM size) is 16777216 bytes. page_size=1000 pre-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 post-rounding: start=0x00000000ff000000, len=0x1000000, end=0x0000000100000000 programmer_map_flash_region: mapping Opaque flash chip from 0x00000000ff000000 to 0x00007f0e65645000 Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:Elinux_mtd_erase: ioctl: Input/output error Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... not defined. Looking for another erase function. Trying erase function 2... not defined. Looking for another erase function. Trying erase function 3... not defined. Looking for another erase function. Trying erase function 4... not defined. Looking for another erase function. Trying erase function 5... not defined. Looking for another erase function. Trying erase function 6... not defined. Looking for another erase function. Trying erase function 7... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
You may now reboot or simply leave the machine running. page_size=1000 pre-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 post-rounding: start=0x00007f0e65645000, len=0x1000000, end=0x00007f0e66645000 programmer_unmap_flash_region: unmapped 0x00007f0e65645000
On Wed, Oct 14, 2020 at 9:54 AM Naresh G. Solanki < naresh.solanki.2011@gmail.com> wrote:
Can you provide info below:
- Platform/SoC ?
- Verbose flashrom output(append -VVV in commandline)
Regards, Naresh
On Wed, Oct 14, 2020 at 8:03 PM Balaji Sivakumar < shivbalaji1985@gmail.com> wrote:
> Hello Everyone, > > We are using SPI flash(Macronix) to program the BIOS. And we use an > external programmer to flash the BIOS (coreboot including FD+ME) into SPI > Flash (16384 kB, SPI), it works fine and boots well. The board is > functional and we have successfully booted a kernel on it. > > Am working on adding a feature to upgrading the BIOS (complete > IFD+ME+Coreboot) using intel-spi driver at the OS level. Able to > successfully take the backup full 16MB spi nor flash data which > includes IFD+ME+BIOS using flashrom Internal Programmer option and > it is identified as Opaque flash chip and using dd command as well. > > But we are seeing the erase fail through both flashrom and > flash_erase utility. I believe it fails to erase at the flash descriptor > location. > > As far as Read/Write access to the SPI regions, I have enabled the > Host CPU BIOS write access and ME Master Access as 0xFFFF through Intel FIT > Tool but still not able to erase it and it fails. > > Is there anything that could be preventing to enable read/write > access to the Intel flash descriptor or any SOC SPI controller protection > to access the Flash descriptor? > > Any pointers would be appreciated. > > Thanks > Balaji > _______________________________________________ > coreboot mailing list -- coreboot@coreboot.org > To unsubscribe send an email to coreboot-leave@coreboot.org >
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji +1-319-573-9768
-- Best regards, Naresh G. Solanki
-- Thanks, Balaji
--
--
Thanks, Balaji +1-319-573-9768
-
Balaji Sivakumar -
Naresh G. Solanki