On Tue, 23 Jan 2018 21:02:02 +0800 戴，曉政 via coreboot coreboot@coreboot.org wrote:
Dear Taiidan,
I just want to install and simply compile correboot at the current stage because I am a junior develop of coreboot. I will buy a ASUS KGPE-D16 mainboard from auction website after I restore my development environment. Thank you for your response. I have two question finally.
- Does BIOS rom of KGPE-D16 be removable?
The BIOS (SPI) flash chip on the KGPE-D16 is socketed, so yes it is removable. If you plan to swap it, I highly recommend a dedicated DIP extractor for it! Something like this:
https://lut.im/K9hQJgJbKk/gR8wUUwDwd7pjBMu.JPG
- Does architecture of KGPE-D16 be pre-PSP or not?
Yes, it is pre-PSP.
Good luck!
Dear Taiidan,
I have read letter from Kyosti, he said ?AGESA family15 boards and chipset vendorcode for older than Trinity has been/will be removed on 4.7 release?. In this case, whether I still can >use H8SCM for my first coreboot mainboard or not? If you want to port coreboot it is a good board, to have as a functional device no. And I will try to port KGPE-D16 after I complete porting of H8SCM with coreboot. In addition, I apologize again for my poor English. Porting is creating the code base for a motherboard. Installing coreboot is simply compiling and installing, I am not sure which you want? The H8SCM needs a port whereas the KGPE-D16 is fully functional and a great example of coreboot ports.
Avast 防毒軟體已檢查此封電子郵件的病毒。 https://www.avast.com/antivirus
-
Merlin Büge